Ledytech 15W 5730 SMD LED Panel Ceiling Light Fixture Instruction Manual

1. Important Safety Information

Please read these instructions carefully before installation and retain them for future reference. Improper installation can lead to electrical shock or fire hazards.

Always disconnect power at the circuit breaker before installing, servicing, or removing the fixture.
This product is designed for indoor use only.
Ensure the light base is larger than the LED panel's outside diameter (19.5cm) for proper fit.
Installation should be performed by a qualified electrician if you are unsure about electrical wiring.
Do not modify the product in any way.
This LED panel is not dimmable. Do not connect to a dimmer switch.

2. Package Contents

Verify that all components are present before beginning installation:

1 x 15W LED Light Panel (Circular Annular Round Replacement Board)
1 x LED Driver (Input 100-265V 50/60Hz)
Magnets (for attaching to a steel light base)
Screws (for alternative mounting or securing)

Note: Light fixture cover is not included.

3. Specifications

Feature	Detail
Wattage	15 Watts
Light Type	LED (5730 SMD)
Brightness	1650 Lumens
Efficiency	110 Lumens/Watt
Color Temperature	6000-6500K (White)
Input Voltage	100-265V AC, 50/60Hz
Outside Diameter	19.5 cm (7.68 inches)
Inside Diameter	14.5 cm (5.71 inches)
Lifespan	Approximately 5 years (based on 8 hours/day usage)
Material	Aluminum Board
Special Features	Energy saving, Instant On, Not Dimmable, Shatter Resistant, Shock and vibration resistant

4. Setup and Installation

This LED panel is designed as a replacement for existing ceiling light bulbs. Ensure the power is OFF before proceeding.

Step 1: Prepare the Fixture

Disconnect power to the light fixture at the circuit breaker. Remove the existing bulb and driver from your ceiling light fixture. Ensure the light base is clean and free from debris.

Diagram showing steps to remove old bulb and driver from a ceiling light fixture.

Image: Illustration of removing the damaged bulb and driver from a ceiling light.

Step 2: Connect the LED Driver

Connect the input wires of the provided LED driver to the household electrical wiring (Live and Neutral). Use appropriate wire connectors (not included unless specified). Ensure connections are secure.

Close-up of the LED panel showing the connector for the driver.

Image: Detail of the LED panel's electrical connector.

Step 3: Mount the LED Panel and Driver

The LED panel and driver are designed for easy installation. If your light fixture has a steel base, the included magnets can be used to securely attach the LED panel and driver to the base. Position the driver centrally within the LED panel ring if possible.

LED driver attached to a metal ring with magnets.

Image: The LED driver secured to a metal ring using magnets.

Connect the output wires from the LED driver to the LED panel. Ensure the connection is firm. If the light base is not steel, use the provided screws to secure the LED panel and driver to a suitable surface within the fixture, ensuring no wires are pinched.

Assembled LED panel and driver mounted inside a light fixture base.

Image: The LED panel and driver assembly mounted within a ceiling light fixture.

Step 4: Reassemble the Fixture

Carefully replace the light fixture cover. Restore power at the circuit breaker and test the light.

Diagram showing steps to cover the fixture and turn on the light.

Image: Illustration of covering the fixture and the final bright light.

5. Operating Instructions

Once installed, the Ledytech 15W LED Panel operates like a standard light fixture. Use your existing wall switch to turn the light ON or OFF.

Power ON: Flip the wall switch to the 'ON' position. The LED panel will illuminate instantly.
Power OFF: Flip the wall switch to the 'OFF' position.
Non-Dimmable: This LED panel is not compatible with dimmer switches. Connecting it to a dimmer may cause damage or malfunction.

6. Maintenance

The Ledytech 15W LED Panel requires minimal maintenance.

Cleaning: Ensure power is disconnected before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the LED panel and fixture cover. Do not use abrasive cleaners or solvents.
Inspection: Periodically check for any loose connections or signs of damage. If any issues are found, disconnect power and consult a qualified electrician.

7. Troubleshooting

If you encounter issues with your LED panel, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Light does not turn ON	No power to the fixture Loose wiring connection Faulty LED driver or panel	Check circuit breaker and wall switch. Ensure all wire connections are secure (with power OFF). Contact customer support if the issue persists after checking power and connections.
Light flickers or dims	Incompatible dimmer switch Loose connection Voltage fluctuations	Ensure the fixture is not connected to a dimmer switch. Check wiring connections (with power OFF). Consult an electrician to check household voltage stability.

8. Warranty and Support

The Ledytech 15W 5730 SMD LED Panel is designed for a long operational life, estimated at 5 years under normal usage conditions (8 hours per day).

For warranty claims or technical support, please contact Ledytech customer service through the retailer where the product was purchased. Please have your purchase receipt and product model information ready.