Introduction
Thank you for purchasing the GLOBO LIGHTING 2491K Retro Style Green Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: GLOBO LIGHTING 2491K Retro Style Green Table Lamp, illuminated.
Safety Instructions
- Ensure the power supply is disconnected before installation, cleaning, or bulb replacement.
- This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Use only bulbs with an E27 base and a maximum wattage of 60W. Exceeding this limit may cause overheating and damage.
- Do not touch the bulb immediately after use, as it may be hot.
- Keep the lamp away from flammable materials.
- If the power cord is damaged, it must be replaced by a qualified electrician to avoid hazards.
- Do not attempt to modify the lamp in any way.
Package Contents
Verify that all components are present and undamaged:
- 1 x GLOBO LIGHTING 2491K Table Lamp (Base, Arm, Shade)
- 1 x Power Cable (integrated)
- Note: An E27 bulb is not included and must be purchased separately.
Setup
- Unpack the Lamp: Carefully remove all packaging materials. Inspect the lamp for any signs of damage.
- Choose a Location: Place the lamp on a stable, flat surface, such as a desk or table, ensuring it is away from edges and heat sources.
- Install the Bulb:
- Ensure the lamp is unplugged from the power outlet.
- Gently screw an E27 bulb (max 60W) into the lamp's socket located inside the shade. Do not overtighten.
Figure 2: Bulb installation area within the shade.
Operating Instructions
- Connect to Power: Plug the power cable into a standard 230V electrical outlet.
- Turn On/Off: The lamp is operated by a pull chain switch.
- To turn the lamp ON, gently pull the chain once.
- To turn the lamp OFF, gently pull the chain again.
Figure 3: Location of the pull chain switch.
- Adjust the Shade: The lamp features an adjustable shade. Gently tilt the green shade to direct the light as desired. Avoid excessive force to prevent damage to the joint.
Figure 4: Adjustable joint for shade positioning.
Maintenance
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe the metal base and acrylic shade. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement:
- Ensure the lamp is unplugged and the bulb has cooled down completely.
- Unscrew the old E27 bulb counter-clockwise.
- Screw in a new E27 bulb (max 60W) clockwise until secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | 108745 |
| Brand | GLOBO LIGHTING |
| Lamp Type | Table Lamp |
| Material | Metal (Base), Acrylic (Shade) |
| Shade Color | Green |
| Dimensions (L x W x H) | 19 cm x 25 cm x 36 cm |
| Item Weight | 1.38 Kilograms |
| Bulb Base | E27 |
| Max Wattage | 60W |
| Voltage | 230V |
| Switch Type | Pull Chain |
| Usage | Indoor Use Only |
Figure 5: Product dimensions.
Warranty Information
Warranty information for this product is not specified in the provided product data. Please refer to your purchase documentation or contact your retailer for details regarding warranty coverage.
Support
For technical assistance, replacement parts, or further inquiries, please contact your retailer or the manufacturer, GLOBO LIGHTING. Ensure you have your model number (108745) and proof of purchase available when seeking support.