BRAVEN Bridge Bluetooth Speaker and Conferencing Device User Manual

Introduction

Thank you for choosing the BRAVEN Bridge. This manual provides comprehensive instructions for the setup, operation, and maintenance of your portable Bluetooth speaker and conferencing device. The BRAVEN Bridge is engineered for clear conference calls and high-quality audio playback, featuring dual omni-directional microphones with advanced noise-canceling technology and a convenient built-in power bank.

Package Contents

Please verify that all items are present in your BRAVEN Bridge package:

• BRAVEN Bridge Device
• USB Charging Cable
• User Manual (this document)

Product Overview

Familiarize yourself with the components and controls of your BRAVEN Bridge device.

Image: Angled view of the BRAVEN Bridge, showcasing its compact, rectangular design with a textured top surface and smooth black sides.

Controls and Indicators

Image: Top view of the BRAVEN Bridge, highlighting the control panel with power, play/pause, volume up, and volume down buttons.

• Power Button: Press and hold to turn the device on or off.
• Play/Pause Button: Controls audio playback and answers/ends calls.
• Volume Up Button: Increases audio volume.
• Volume Down Button: Decreases audio volume.
• LED Indicators: Display power status, battery level, and Bluetooth pairing status.

Ports

Image: Side view of the BRAVEN Bridge, showing the USB-A output port, micro USB input port, and battery indicator lights.

• Micro USB Input Port: For charging the BRAVEN Bridge device.
• USB-A Output Port: For charging external devices (power bank function).
• Audio Jack (3.5mm): For wired audio connection (if applicable, not explicitly mentioned but common).

Setup

1. Charging the Device

Before initial use, fully charge your BRAVEN Bridge. Connect the supplied micro USB cable to the micro USB input port on the device and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicators will show charging progress and battery level.

2. Powering On/Off

To turn the BRAVEN Bridge on, press and hold the Power button for approximately 2-3 seconds until the LED indicators illuminate. To turn the device off, press and hold the Power button again for 2-3 seconds until the LEDs turn off.

3. Bluetooth Pairing

1. Ensure the BRAVEN Bridge is powered on. When first turned on, it will automatically enter Bluetooth pairing mode, indicated by a flashing LED.
2. On your smartphone, tablet, or laptop, navigate to the Bluetooth settings.
3. Enable Bluetooth and search for available devices.
4. Select 'BRAVEN Bridge' from the list of detected devices.
5. Once successfully paired, the LED indicator will become solid, and you may hear an audible confirmation.

The device will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

Making and Receiving Calls

• Answering a Call: When an incoming call rings, press the Play/Pause button once to answer.
• Ending a Call: During a call, press the Play/Pause button once to end the call.
• Adjusting Call Volume: Use the Volume Up and Volume Down buttons on the device to adjust the call volume.
• Making a Call: Initiate calls directly from your paired smartphone. The audio will automatically route through the BRAVEN Bridge.

Audio Playback

Once your device is successfully paired via Bluetooth, audio from your connected source will play through the BRAVEN Bridge.

• Play/Pause: Press the Play/Pause button once to play or pause audio.
• Volume Control: Use the Volume Up and Volume Down buttons to adjust the audio playback volume.

Using as a Power Bank

The BRAVEN Bridge includes a built-in 2600 mAh power bank to charge your mobile devices.

1. Connect your mobile device's charging cable to the USB-A output port on the BRAVEN Bridge.
2. Connect the other end of the cable to your mobile device.
3. Charging will begin automatically. The BRAVEN Bridge's battery indicators will show its remaining charge.

Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the device. Avoid abrasive cleaners, solvents, or harsh chemicals.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Exposure: The BRAVEN Bridge is not waterproof. Avoid exposing it to water or excessive moisture.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

Troubleshooting

Specifications

Warranty and Support

For detailed warranty information, technical assistance, or customer support, please visit the official BRAVEN website or contact their customer service department. Keep your proof of purchase for warranty claims.