Introduction
This user manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Pfister RT65-CB1C Avalon Roman Tub Trim. Designed with elegance and symmetry, this polished chrome trim is a perfect complement to any bath. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.
Image: Pfister Avalon Roman Tub Trim, showcasing the high-arc spout and two handles in polished chrome finish.
Safety Information
- Always turn off the main water supply before beginning any installation or repair work.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Ensure all connections are secure and leak-free before restoring water supply.
Package Contents
Verify that all components are present before beginning installation:
- Roman Tub Spout
- Handles (2)
- Plastic Rings (2)
- Spout Ring
Important Note: The valve body is sold separately and is not included with this trim kit.
Image: A visual reminder that the Pfister shower valve is not included and wall valve access is required for installation.
Setup and Installation
This Roman Tub Trim is designed for a 3-hole installation. Ensure you have the correct valve body installed according to its specific instructions before proceeding with the trim installation.
Installation Steps (General Overview):
- Prepare the Installation Area: Ensure the mounting surface is clean, dry, and free of debris. Confirm the 3-hole configuration matches the trim.
- Install the Spout: Secure the Roman tub spout to the center hole, ensuring the spout ring is properly seated. Tighten the mounting hardware from underneath the deck.
- Install the Handles: Mount the two handles into the remaining holes. Connect the hot and cold water lines to the appropriate valve inlets as per your valve body's instructions.
- Connect the Spout to the Valve: Connect the spout's water supply line to the valve body's outlet.
- Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Operate the handles to ensure proper water flow and temperature control.
Image: Detailed dimensions of the Roman tub spout and handles for precise installation planning.
Image: The Pfister Avalon Roman Tub Trim elegantly installed on a bathtub deck, demonstrating its appearance in a bathroom setting.
Operating Instructions
To operate your Pfister Avalon Roman Tub Trim:
- Turning On/Off: Rotate the hot or cold handle to turn on the water flow. Turn the handles back to the closed position to stop the water flow.
- Temperature Control: Adjust the water temperature by mixing hot and cold water using the respective handles.
- Flow Rate: The flow rate is controlled by how much you open the handles.
Maintenance and Cleaning
To maintain the polished chrome finish and ensure optimal performance of your Pfister Roman Tub Trim:
- Regular Cleaning: Clean the surface regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Drying: After cleaning, rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Aerator clogged; Water supply partially closed; Debris in valve. | Clean or replace aerator; Ensure water supply is fully open; Consult a plumber to check valve. |
| Leaking from Spout/Handles | Loose connections; Worn O-rings or seals in valve body (not part of trim). | Check and tighten connections; Consult valve body manual or a plumber for internal valve issues. |
| Difficulty Turning Handles | Mineral buildup; Internal valve issue. | Clean around handle base; Consult valve body manual or a plumber. |
Specifications
- Brand: Pfister
- Model Name: RT65CB1C
- Finish Type: Chrome
- Material: Metal
- Number of Handles: 2
- Hole Count: 18 (for trim installation, typically 3 holes are used on the deck)
- Installation Type: Deck Mounted
- Style: High-Arc
- Item Weight: 6 Pounds
- Product Dimensions: 3"D x 1"W x 1"H (Note: These dimensions seem generic, refer to diagram for detailed measurements)
- UPC: 038877610053
- ADA/ANSI A117.1 Compliant: Yes
Warranty and Support
Your Pfister Avalon Roman Tub Trim is backed by the Pfister Pforever Warranty, which covers finish and function for life. For detailed warranty information or technical support, please visit the official Pfister website or contact their customer service.
Image: The Pfister Limited Lifetime Warranty emblem, signifying long-term product assurance.
For further assistance, please refer to the contact information provided on the Pfister official website or your product packaging.