Introduction
This manual provides essential information for the safe and efficient operation of your True Induction TI-1B 12-inch Built-In Single Burner Induction Glass-Ceramic Cooktop. Please read all instructions carefully before use and retain this manual for future reference.
The TI-1B cooktop features a smooth ceramic glass surface and touch controls. It is designed for energy-efficient cooking by utilizing magnetic-based technology to heat cookware directly. This model is UL858 certified, allowing for safe installation into countertops, and is also suitable for portable use.
Important Safety Instructions
To reduce the risk of fire, electric shock, injury to persons, or damage when using the appliance, follow basic safety precautions, including the following:
- Read all instructions before using the cooktop.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Contact customer service for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- This appliance is for household use only.
- Ensure proper ventilation around the cooktop during operation.
- Only use induction-compatible cookware.
Installation
The True Induction TI-1B cooktop is designed for both built-in countertop installation and portable use.
Built-In Installation
For built-in installation, the countertop cutout dimensions are 11 3/8 inches (W) x 13 3/4 inches (L). Ensure adequate clearance around the unit as specified in the diagram below. It is crucial to read the full installation manual (if provided separately) and verify dimensions before making any cuts to your countertop.
Figure 1: Installation dimensions for the TI-1B cooktop. Note the required countertop cutout and minimum clearances.
Portable Use
For portable use, place the cooktop on a stable, flat, heat-resistant surface. Ensure there is sufficient space around the unit for proper ventilation.
Power Connection
The cooktop requires a standard 110V electrical outlet.
Video 1: Demonstrates the portability and simple plug-in setup of the True Induction TI-1B cooktop.
Compatible Cookware
Induction cooktops require cookware with a magnetic base. To check if your cookware is compatible, simply hold a magnet to the bottom of the pan. If the magnet sticks, the cookware is compatible.
- Optimal Cookware: Flat bottom, diameter between 4.5 to 10 inches (11.4 cm to 25.4 cm).
- Compatible Materials: Stainless steel, cast iron, enamel-coated steel.
- Incompatible Materials: Aluminum, copper, glass, ceramic, or non-magnetic stainless steel.
Figure 2: The cooktop with an example of compatible cookware.
Operating Instructions
Controls Overview
The cooktop features touch controls integrated into its ceramic glass surface.
Figure 3: Detail of the cooktop's touch control panel.
Basic Operation
- Power On: Place compatible cookware on the cooking zone. Press the Power button to turn on the unit.
- Select Mode: Choose between Power (Heat) or Temperature (Temp) mode.
- Power Mode: Adjust heating intensity using the + and - buttons. The cooktop offers 10 power levels.
- Temperature Mode: Set a specific temperature using the + and - buttons. The cooktop will maintain the set temperature.
- Timer Function: Press the Timer button and use + and - to set the desired cooking time. The cooktop will automatically shut off when the timer expires.
- Child Lock: Activate the Lock function to prevent accidental changes to settings during operation or when the unit is off.
- Power Off: Press the Power button to turn off the cooktop. The surface may remain warm for a short period after use.
Video 2: A short film demonstrating the features and ease of use of True Induction cooktops, including temperature adjustment and rapid boiling.
Cleaning and Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your cooktop.
- Always unplug the cooktop and allow it to cool completely before cleaning.
- Wipe the ceramic glass surface with a damp cloth and mild detergent. For stubborn stains, use a non-abrasive ceramic cooktop cleaner.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the surface.
- Ensure no liquid enters the internal components of the cooktop. Do not immerse the unit in water.
- Clean the ventilation openings regularly to prevent dust buildup, which can affect performance.
Figure 4: The clean ceramic glass surface of the cooktop.
Troubleshooting
If you encounter issues with your cooktop, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooktop does not turn on. | Not plugged in; power outage; circuit breaker tripped; incorrect cookware. | Ensure unit is properly plugged in. Check household power supply and circuit breaker. Use induction-compatible cookware. |
| Cookware not heating. | Cookware is not induction-compatible; cookware is too small or too large; cooktop not turned on. | Verify cookware is magnetic. Ensure cookware base diameter is within 4.5-10 inches. Turn on the cooktop and select a power/temperature setting. |
| Display shows an error code. | Overheat protection activated; internal malfunction. | Turn off the unit, unplug, and allow to cool. If the error persists after restarting, contact customer support. |
| Unusual noise during operation. | Normal fan operation; cookware vibration. | A low hum from the cooling fan is normal. Some cookware may vibrate slightly, especially at high power settings; this is generally not a fault. |
Specifications
- Model: TI-1B
- Type: Single Burner Induction Cooktop
- Material: Ceramic Glass, Metal
- Color: Black
- Power Source: Electric 110V
- Voltage: 120 Volts
- Wattage: 1750 Watts
- Product Dimensions (D x W x H): 15" x 12" x 2.5"
- Controls Type: Touch
- Special Features: Automatic Shut-Off, Built-in Cooktop, LCD Display, Overflow detection, Overheat Sensor, Quick-touch Controls, Temperature Control.
- Certifications: UL858 Listed, CETL Certified, FCC Compliant.
Figure 5: Certifications for the True Induction TI-1B cooktop.
Warranty Information
This True Induction cooktop comes with a 2-year warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact True Induction customer support.
Customer Support
For any questions, technical assistance, or warranty claims, please contact True Induction customer support.
- Website: www.trueinduction.com
- Email: Refer to product packaging or website for contact email.
- Phone: Refer to product packaging or website for contact phone number.
