Pure Daily Care NanoSteamer User Manual

Introduction

The Pure Daily Care NanoSteamer is a versatile 3-in-1 device designed to enhance your skincare and wellness routine. It functions as a nano-ionic facial steamer, a room humidifier, and a towel warmer. This manual provides essential information for safe and effective use, ensuring you achieve spa-quality results at home.

The Pure Daily Care NanoSteamer in teal, accompanied by its 5-piece stainless steel blackhead and blemish extractor kit and storage pouch.

Safety Information

Always unplug the device before refilling the water tank. Keep the device and the steam away from children and pets. Do not leave the device unattended while in operation. Allow the device to cool down completely before handling or storing. Keep the device clean and dry when not in use. Do not use the humidifier function in a room with an open flame or near flammable materials. Always follow the instructions provided in the user manual for safe operation.

Setup

1. Place the NanoSteamer on a flat, stable, heat-resistant surface.
2. Ensure the device is unplugged before filling the water tank.
3. Locate the water tank at the back of the unit. Remove it by pulling it out.
4. Fill the water tank with distilled or de-ionized water. The maximum capacity is 200ml. Avoid using tap water to prevent mineral buildup.
5. Securely reinsert the water tank into the unit.
6. Plug the power cable into a suitable electrical outlet (110V for US models).

An internal view of the NanoSteamer, highlighting key components such as the steam spout, water tank, towel chamber, and auto-shutoff sensor, along with the included stainless steel skin kit tools.

Operating Instructions

The NanoSteamer offers three distinct modes: Facial Steamer, Humidifier, and Warm Towel. Select your desired function using the control knob on the front of the device.

Facial Steamer Mode

Turn the control knob to "Facial Steamer". The device will begin to heat up and produce nano-ionic steam within approximately 90 seconds.

Position your face 8-12 inches away from the steam spout. Close your eyes and relax. A session typically lasts 10-15 minutes. The device provides up to 30 minutes of continuous steam on a full tank.

After steaming, your pores will be open, making it an ideal time for pore extraction using the included 5-piece stainless steel skin kit, or for applying your preferred skincare products for enhanced absorption.

A woman demonstrating the use of the NanoSteamer for a facial steam, highlighting the comfortable distance for optimal steam exposure.

Humidifier Mode

Turn the control knob to "Humidifier". The device will release a fine mist into the air, increasing room humidity. This mode is ideal for improving air quality and alleviating dry skin or respiratory discomfort.

Ensure the water tank is filled for continuous operation. The auto-shutoff sensor will power down the unit when water runs out.

The NanoSteamer operating as a humidifier, releasing mist into a room, emphasizing its role in improving indoor air quality.

Warm Towel Mode

To use as a towel warmer, ensure the device is off and unplugged. Carefully remove the top steam spout component by twisting it counter-clockwise.

Place a small, damp hand or facial towel into the towel chamber.

Reattach the top component and turn the control knob to "Warm Towel". The device will heat the towel, providing a warm, soothing compress for your face or body. Exercise caution when handling hot towels.

This image illustrates the NanoSteamer's dual functionality as both a towel warmer (left) and a home humidifier (right), showcasing its versatility.

Maintenance

Cleaning the Water Tank

After each use, especially if using tap water (though distilled is recommended), empty any remaining water from the tank.

Rinse the water tank with clean water and allow it to air dry completely before storage.

Descaling (if necessary)

If mineral deposits accumulate, mix a solution of equal parts white vinegar and water.

Pour the solution into the water tank and let it sit for 30 minutes.

Empty the solution and rinse the tank thoroughly with clean water multiple times to remove any vinegar residue.

Cleaning the Unit Exterior

Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.

Troubleshooting

No Steam Production:

• Check if the water tank is properly filled and seated.
• Ensure the device is plugged in and the power knob is turned to the desired setting.
• Allow adequate time for the unit to heat up (approx. 90 seconds).

Unusual Odor:

• A slight plastic odor may occur during initial uses; this is normal and should dissipate.
• If the odor persists, ensure only distilled water is used and perform a thorough cleaning/descaling.

Device Shuts Off Automatically:

• This is a safety feature indicating the water tank is empty. Refill the tank to resume operation.

Specifications

Warranty and Support

For warranty information and customer support, please contact Pure Daily Care directly.

Manufacturer: Pure Daily Care

Contact information may be available on the manufacturer's official website or through your purchase platform.