Scanpart Washing Machine Care 250 ml Instruction Manual

Product Overview

The Scanpart Washing Machine Care 250 ml is designed to thoroughly clean your washing machine and dishwasher. It helps maintain machine drums, door seals, and detergent cisterns, contributing to the longevity of your appliance.

Image: Front of Scanpart Washing Machine Care 250 ml bottle. This view highlights the product's primary functions, including hygienic cleaning, residue elimination, and combating unpleasant odors. It also indicates a recommended usage frequency of 2-3 times per year.

How to Use

Follow these instructions for effective cleaning and maintenance of your washing machine:

1. Detergent Dispenser Cleaning

1. Add 50 ml of the cleaner (refer to the marking on the bottle) to 4 liters of warm water.
2. Remove the detergent drawer from your washing machine.
3. Soak the detergent drawer in the prepared solution for 30 minutes.
4. After soaking, rinse the drawer thoroughly with clear water and reinsert it into the machine.

2. Door Seal Cleaning

• Apply a small amount of the cleaner onto a clean cloth.
• Carefully clean the rubber door seals of your washing machine with the cloth.
• Wipe the seals afterwards with a clean, damp cloth to remove any cleaner residue.

3. Machine Cleaning (Main Wash Cycle)

• Pour the remaining contents of the bottle into the main wash compartment of your washing machine's detergent drawer.
• Run an empty washing machine cycle (without laundry and without pre-wash) at a minimum temperature of 60°C.

Image: Back of Scanpart Washing Machine Care 250 ml bottle. This view provides detailed application instructions in German, Dutch, and French, along with manufacturer and distributor contact information.

Recommended Usage Frequency

For optimal performance, to prevent residue buildup, and to extend the life of your appliance, it is recommended to use Scanpart Washing Machine Care 250 ml 2 to 3 times per year.

Ingredients

• Citric acid
• Glycerine
• Alcohols

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Product Specifications

Safety Precautions

• Keep out of reach of children and pets.
• Avoid contact with eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if irritation persists.
• Do not ingest. If swallowed, seek medical advice immediately and show this container or label.
• Use in a well-ventilated area.
• Do not mix with other cleaning products, especially those containing bleach or ammonia.
• Store in a cool, dry place, away from direct sunlight.

Troubleshooting

• If residue remains after cleaning: Ensure the correct amount of cleaner was used and the recommended temperature (minimum 60°C for machine cleaning) was maintained. You may need to repeat the application.
• If odor persists: Ensure all parts, especially door seals and detergent dispenser, were thoroughly cleaned and rinsed. A second machine cleaning cycle may be beneficial.
• For persistent issues: Refer to your appliance's specific user manual for additional cleaning recommendations or contact the manufacturer.

Manufacturer Information and Support

Manufacturer: Scanpart

SCANPART® is a trademark of the Elka Pieterman Group.

Supplier/Distributor: Menz & Könecke GmbH
An der Beek 255
41372 Niederkrüchten, Germany

Email: info@menz.de
Phone: +49 2163 594 0

Websites: www.elkapieterman.com, www.scanpart.eu, www.menz.de