SmartBidet SB-1000WR
SmartBidet SB-1000WR Electric Bidet Toilet Seat User Manual
Model: SB-1000WR
Product Overview
The SmartBidet SB-1000WR Electric Bidet Toilet Seat is designed to provide enhanced hygiene, comfort, and convenience. This advanced bidet seat features a multi-function remote control, offering a personalized and refreshing experience. It is easy to install and incorporates energy-saving features for environmental friendliness.
Figure 1: SmartBidet SB-1000WR Electric Bidet Toilet Seat with Remote Control.
Key Features:
- Maintain a Deeper Personal Clean: Three oscillating wash modes (posterior, feminine, turbo) for comprehensive cleaning.
- Adjustable Settings: Five water pressure levels, three water temperature settings, and five nozzle positions for customized comfort.
- Comfort Features: Heated seat with adjustable temperature and a built-in warm air dryer with five levels.
- User-Friendly Control: Haptic touch remote control with a convenient wall mount.
- Hygienic Design: Hygienic filtered water, self-cleaning nozzle, and a safety on/off sensor.
- Convenience: Soft-close lid and seat, quick-release seat for easy cleaning.
- Energy Efficiency: Energy-saving mode to reduce operating costs.
Setup and Installation
The SmartBidet SB-1000WR is designed for easy DIY installation. Please follow the instructions carefully to ensure proper setup.
Before Installation:
- Ensure your toilet is a Round shape. This model is specifically designed for round toilets.
- An electrical outlet is required near the toilet for power.
Figure 2: Toilet Shape Compatibility and Electrical Outlet Requirement.
Installation Steps:
- Turn off the water supply to your toilet and flush to empty the tank.
- Remove your existing toilet seat.
- Install the T-valve to the toilet tank's water supply.
- Connect the bidet hose from the T-valve to the bidet unit.
- Mount the bidet seat onto the toilet bowl using the provided mounting bolts and base plate.
- Connect the power cord to the electrical outlet.
- Turn on the water supply and check for any leaks.
Figure 3: Easy DIY Installation Diagram.
Remote Control Setup:
- Insert the included 2 AAA batteries into the remote control.
- Mount the remote control holder to a convenient location on your bathroom wall.
Operating Instructions
The SmartBidet SB-1000WR is operated using the included remote control. Ensure the seat sensor is activated (by sitting on the seat) for the unit to function.
Figure 4: Remote Control Features.
Wash Functions:
- Posterior Wash: For general cleansing.
- Feminine Wash: Gentle wash for feminine hygiene.
- Turbo Wash: A concentrated wash for enhanced cleaning.
- Oscillating Wash: Moves the nozzle back and forth for a wider cleaning area.
Figure 5: Different Wash Modes.
Adjustable Settings:
- Water Pressure: Adjust using the remote control buttons.
- Water Temperature: Select from three temperature settings.
- Nozzle Position: Adjust the nozzle forward or backward for optimal cleaning.
- Heated Seat: Adjust the seat temperature for comfort.
Figure 6: Warm Seat Feature.
Drying Function:
- Warm Air Dryer: Activates a gentle warm air stream for drying.
Figure 7: Heated Dryer Feature.
Additional Functions:
- Safety On/Off Sensor: The bidet functions only when a user is seated.
- Soft-Close Lid and Seat: Prevents slamming and reduces noise.
- Energy Saving Mode: Activates a mode to maintain water and seat temperature at 89.6°F (32°C) to conserve energy.
Figure 8: Soft-Close Lid and Seat.
Figure 9: Energy Saving Mode.
Figure 10: Seat Sensor for Automatic Activation.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your SmartBidet SB-1000WR.
Nozzle Cleaning:
- The bidet features a self-cleaning nozzle that cleans itself before and after each use.
- For additional cleaning, you can manually extend the nozzle and wipe it with a soft cloth and mild detergent.
Figure 11: Self-Cleaning Nozzle in action.
Seat Cleaning:
- The bidet seat features a quick-release mechanism for easy removal and thorough cleaning.
- Use a soft cloth and mild, non-abrasive cleaners to clean the seat and exterior surfaces. Avoid harsh chemicals.
Troubleshooting
If you encounter any issues with your SmartBidet SB-1000WR, please refer to the following common troubleshooting tips. For more detailed information, consult the full user manual available as a PDF.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water spray | Water supply valve is closed; Seat sensor not activated. | Open the water supply valve; Ensure you are properly seated on the bidet. |
| No power | Power cord unplugged; Circuit breaker tripped. | Check power connection; Reset circuit breaker. |
| Remote control not responding | Batteries are dead or incorrectly inserted. | Replace batteries (2 AAA); Ensure correct polarity. |
| Water temperature not changing | Temperature setting incorrect; Insufficient time for heating. | Adjust temperature setting on remote; Allow a few moments for water to heat up. |
Specifications
| Model Number | SB-1000WR |
| Brand | SmartBidet |
| Color | SB-1000 (White) |
| Material | Plastic |
| Shape | Round |
| Product Dimensions | 23"L x 20"W |
| Item Weight | 9.97 pounds (4.53 Kilograms) |
| Operation Mode | Automatic |
| Voltage | 120V |
| Batteries Required | 2 AAA batteries (included for remote) |
| UPC | 852905005358 |
Warranty and Support
Warranty Information:
The SmartBidet SB-1000WR comes with a 1-year manufacturer's warranty.
Please retain your proof of purchase for warranty claims.
Additional Support:
For comprehensive instructions, detailed diagrams, and further assistance, please refer to the official User Manual PDF:
You can also visit the SmartBidet Store on Amazon for more product information and support resources.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.