VINABTY Universal Remote Control PN-14+AL Instruction Manual

1. Introduction

This manual provides instructions for setting up and operating your VINABTY Universal Remote Control, model PN-14+AL. This remote is designed to be compatible with a wide range of Panasonic LCD, LED, and 3D HDTV models. For most Panasonic TVs, no setup is required; simply insert batteries and begin use. If the remote does not function immediately, please refer to the manual setting methods provided in this document.

Please read these instructions thoroughly before using the remote control.

2. Setup and Initial Use

2.1 Battery Installation

The remote control requires batteries (not included). Open the battery compartment cover on the back of the remote and insert two AAA batteries, ensuring correct polarity (+/-). Close the cover securely.

2.2 Automatic Compatibility

For approximately 98% of Panasonic TV models, the VINABTY PN-14+AL remote control will work directly after battery installation without any additional setup. Test the remote with your TV. If it functions correctly, no further action is needed.

2.3 Manual Code Setting (If Automatic Compatibility Fails)

If the remote does not operate your TV automatically, follow these steps to manually input a code:

1. Press and hold the TV button and the POWER button simultaneously for approximately 3 seconds. The LED indicator on the remote will light up.
2. Release both buttons.
3. Input one of the three-digit codes from the list below using the number buttons. If the code is entered successfully, the LED indicator will turn off.
4. Test the remote control's functions with your TV. If it works, the setup is complete. If not, repeat the process with another code from the list.
5. If the entered code is invalid, the LED will flash twice and remain lit. To exit the setup mode, press the TV button.

Code List: 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013

The remote control can save settings even after battery changes.

Image: Detailed instructions for manual code input and learning functions.

3. Operating Instructions

Once set up, the remote functions similarly to an original Panasonic TV remote. Below are common button functions:

• POWER (Red Button): Turns the TV on or off.
• INPUT / TV / AV: Selects video input sources.
• APPS / VIERA Link / VIERA Tools: Accesses smart TV applications or Panasonic-specific features.
• GUIDE / EXIT: Opens the program guide or exits menus.
• HOME / MENU: Accesses the TV's main menu or home screen.
• Directional Pad (Up, Down, Left, Right) & OK: Navigates menus and confirms selections.
• RETURN: Goes back to the previous screen or menu.
• Volume (+/-): Adjusts the volume level.
• Channel (CH ^/v): Changes TV channels.
• Number Pad (0-9): Direct channel input.
• Mute: Silences the TV audio.
• Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback.
• 3D: Activates or deactivates 3D mode on compatible TVs.

Image: Front view of the VINABTY PN-14+AL Universal Remote Control.

4. Advanced Functions

4.1 Code Inquiry

To determine the code currently programmed into the remote control:

1. Press and hold the TV button, then press the 1 button. After approximately 3 seconds, the LED indicator will light up.
2. Input 990 using the number buttons. The LED will flash twice and turn off.
3. Press 1, 2, or 3. The LED will flash to indicate the corresponding digit of the code. For example, if you press 1 and the LED flashes three times, the first digit of the code is 3.

4.2 Learning Function

The remote control has a learning function, allowing it to copy functions from an original remote control. This is useful for functions not covered by the pre-programmed codes.

1. Press and hold the TV button, then long press the LEARN button (often marked with a tilde or similar symbol) for approximately 3 seconds. The LED indicator will light up.
2. Place the original remote control and the VINABTY universal remote control facing each other, with a distance of 3-5 cm between them.
3. Press the button on the original remote control that you wish to copy. The LED indicator on the VINABTY remote will flash after successfully receiving the signal.
4. Press the corresponding button on the VINABTY universal remote control where you want to store this function. The LED will flash twice and remain lit, indicating the function has been stored.
5. Repeat steps 3 and 4 for any other functions you wish to learn.
6. To save the learned functions and exit the learning mode, press and hold the TV button and the VOL- button simultaneously. The LED indicator will turn off.
7. If no button is pressed for 25 seconds during the learning process, the remote will automatically exit learning mode without saving.

5. Compatible Panasonic TV Models

This universal remote control is compatible with numerous Panasonic TV models, including but not limited to the following:

• Original Remote Models: N2QAYB000485, N2QAYB000837, N2QAYB000926, N2QAYB000486, N2QAYB000321, N2QAYB000221
• TV Models: TC-L32U22, TC-L42U22, TC-L37U22, TC-L42U25, TC-P42C2, TC-P50C2, TC-P46C2, TC-P42U2, TC-P50U2, TCP42X2, TCP50X2, TH37LRU30, TH-42LRU20, TH55LRU50, TH42LRU50, TH42LRU5, TC55DT50, TCL42ET5, TCL47DT50, TCL47ET5, TCL47WT50, TCP50GT50, TCP55GT50, TCP55ST50, TCP55VT50, TCP60GT50, TCP60ST50, TCP65GT50, TCP65ST50, TCP65VT50, TC-55LET64, TC-L47ET60, TC-L50ET60, TC-L55ET60, TC-P50ST60, TC-P55ST60, TC-P60ST60, TC-P65ST60, TC-L42ET60, TC-39AS530U, TC-50AS530U, TC-50AS530UE, TC-50ASU534, TC-55AS530U, TC-60AS530U, TC-32LX24, TC-42LD24, TC-42LS24, TH37LRU50, TH32LRU50, TC50PS24, TC58PS24, TC65PS24, TH32LRH30U, TH32LRU5, TH37LRU5, TC-L22X2, TC-L32C22

6. Troubleshooting

• Remote not responding:
  1. Ensure batteries are inserted correctly with the correct polarity.
  2. Replace old batteries with new ones.
  3. Verify that the remote is pointed directly at the TV's infrared receiver.
  4. Try the manual code setting procedure (Section 2.3) if automatic compatibility failed.
• Limited operating range:
  1. Ensure there are no obstructions between the remote and the TV.
  2. Check battery levels; low batteries can reduce signal strength.
  3. The remote operates using infrared (IR) technology, which requires a direct line of sight to the TV's IR sensor.
• Certain buttons do not work:
  1. If using a manually set code, some functions might not be fully supported. Consider using the learning function (Section 4.2) to copy specific buttons from your original remote.
  2. Ensure the remote is in the correct mode (e.g., TV mode).

7. Specifications

Image: Dimensions of the VINABTY PN-14+AL Remote Control.

8. Safety Information

• Do not mix old and new batteries, or different types of batteries.
• Remove batteries if the remote control will not be used for an extended period.
• Keep batteries out of reach of children.
• Do not expose the remote control to direct sunlight, heat, or moisture.
• Avoid dropping or subjecting the remote control to strong impacts.

9. Warranty and Support

Specific warranty information for the VINABTY Universal Remote Control PN-14+AL is not provided in the product details. For any support inquiries, troubleshooting assistance beyond this manual, or warranty claims, please contact the manufacturer or your point of purchase directly.