Introduction
This manual provides detailed instructions for the safe and efficient operation of your Pyle PDA6BU Wireless Bluetooth Power Amplifier System. Please read this manual thoroughly before using the device and retain it for future reference.
Safety Instructions
Observe the following safety precautions to prevent electric shock, fire, or damage to the unit:
- Do not expose this unit to rain or moisture.
- Do not open the amplifier casing. Refer all servicing to qualified personnel.
- Ensure proper ventilation around the unit. Do not block ventilation openings.
- Connect the power cord securely to a grounded outlet.
- Before making any connections, ensure the unit is powered off.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Product Features
- 200 Watt Peak Power Output (100W RMS)
- Dual Channel Stereo Amplifier
- Bluetooth Wireless Music Streaming (40+ ft range)
- Multiple Inputs: 2 RCA Audio Input, 2 x 1/4" Microphone Input, USB, SD Card, 3.5mm AUX Input
- FM Radio Tuner
- LCD Display with ID3 Tag Song Readout
- Front Panel Audio Control Center: Mic Echo/Volume, Balance, Bass, Treble, Master Volume, Input Source
- RCA Audio Output and Banana Plug Speaker Output
- Includes FM Antenna and Remote Control
Package Contents
- Pyle PDA6BU Amplifier Unit
- Remote Control
- FM Antenna
- Power Cable
Front Panel Controls and Functions
Image: Front view of the Pyle PDA6BU amplifier, showing all controls and the LCD display. This image illustrates the layout of the power switch, mode buttons, microphone inputs, volume, echo, bass, treble, balance, and input selector knobs, along with the USB and SD card slots.
- Power ON/OFF Switch: Toggles the amplifier power.
- Mode Button: Selects input source (Bluetooth, USB/SD, FM, AUX, CD, DVD).
- Playback Controls: Previous, Play/Pause, Next for media playback.
- LCD Display: Shows current mode, track information, FM frequency, and Bluetooth status.
- USB Port: For connecting USB flash drives.
- SD/MMC Card Slot: For inserting SD/MMC memory cards.
- Folder/Track Knob: Navigates folders and tracks on USB/SD.
- AUX Input (3.5mm): For connecting external audio devices.
- Remote Sensor: Receives signals from the remote control.
- MIC 1/MIC 2 Inputs (1/4"): For connecting microphones.
- MIC/VOL Knob: Adjusts microphone volume.
- ECHO Knob: Adjusts microphone echo effect.
- BASS Knob: Adjusts low-frequency audio output.
- TREBLE Knob: Adjusts high-frequency audio output.
- BALANCE Knob: Adjusts left/right channel balance.
- MASTER VOLUME Knob: Controls the overall output volume.
- INPUT SELECTOR Knob: Selects the audio input source.
Image: Close-up of the Pyle PDA6BU's front panel, highlighting the audio control knobs for Bass, Treble, Mic Volume, and Master Volume. A hand is shown adjusting one of the knobs, emphasizing user interaction with the precision controls.
Rear Panel Connections
Image: Rear view of the Pyle PDA6BU amplifier, illustrating various input and output connections. This includes FM antenna input, RCA audio inputs (CD, DVD), RCA audio output (LINE), Bluetooth antenna, speaker terminals (MAIN SPEAKERS 4-16Ω), and the voltage selector switch.
- FM ANT: Connect the included FM antenna for radio reception.
- AUDIO INPUT (CD, DVD): RCA stereo inputs for connecting external audio sources like CD/DVD players.
- AUDIO OUTPUT (LINE): RCA stereo output for connecting to another amplifier or recording device.
- BT ANT: Bluetooth antenna for wireless connectivity. Ensure it is upright for optimal signal.
- MAIN SPEAKERS (4-16Ω): Speaker terminals for connecting passive speakers. Ensure correct polarity (+ to + and - to -).
- AC INPUT: Power cord connection.
- VOLTAGE CONVERSION Switch (110V/220V): Select the correct voltage for your region before plugging in the unit.
Image: A composite image showing four key features: Folder/Track Music Search Control, ID3 Tag Song Readout on the LCD, FM Radio with LCD Display showing frequency, and the 110V-220V Voltage Selector switch on the rear panel. This highlights various operational and setup aspects of the amplifier.
Setup
- Placement: Place the amplifier on a stable, flat surface with adequate ventilation. Avoid direct sunlight, heat sources, or excessive moisture.
- Speaker Connection:
- Ensure the amplifier is powered off.
- Connect your passive speakers to the "MAIN SPEAKERS" terminals on the rear panel. Match the positive (+) terminal of the amplifier to the positive (+) terminal of the speaker, and the negative (-) to the negative (-).
- Ensure all speaker wires are securely connected and no stray strands are touching other terminals.
- Audio Source Connection:
- For external devices (CD player, DVD player), connect their RCA audio outputs to the corresponding "AUDIO INPUT" (CD, DVD) RCA jacks on the amplifier's rear panel.
- For portable devices, connect a 3.5mm audio cable from your device's headphone jack to the "AUX" input on the front panel.
- Antenna Connection: Connect the included FM antenna to the "FM ANT" terminal on the rear panel for radio reception. Extend the antenna for better signal.
- Power Connection:
- Before plugging in, verify the "VOLTAGE CONVERSION" switch on the rear panel is set to the correct voltage (110V or 220V) for your region. Incorrect voltage selection can damage the unit.
- Connect the power cable to the "AC INPUT" on the rear panel, then plug it into a wall outlet.
Operating Instructions
1. Power On/Off
Press the "POWER" switch on the front panel to turn the amplifier ON or OFF.
2. Input Selection
Rotate the "INPUT SELECTOR" knob on the front panel or press the "MODE" button to choose your desired audio source (Bluetooth, USB/SD, FM, AUX, CD, DVD).
3. Volume Control
Adjust the "MASTER VOLUME" knob to control the overall sound level. Start with a low volume and gradually increase it to a comfortable listening level.
4. Bluetooth Pairing
Image: The Pyle PDA6BU amplifier connected via Bluetooth to a smartphone, with music playing. A speaker is visible next to the amplifier, illustrating the wireless audio streaming capability.
- Select "Bluetooth" mode using the "MODE" button or "INPUT SELECTOR" knob. The LCD display will show "Bluetooth Connected" or "Pairing".
- Enable Bluetooth on your mobile device (smartphone, tablet, computer).
- Search for Bluetooth devices and select "Pyle Audio" from the list.
- Once paired, the amplifier will confirm the connection. You can now stream audio wirelessly.
5. USB/SD Playback
Image: The Pyle PDA6BU amplifier with a USB flash drive inserted into its USB port and an SD card inserted into its SD card slot. This image demonstrates the direct playback capability from these storage devices.
- Insert a USB flash drive into the USB port or an SD card into the SD/MMC card slot.
- Select "USB" or "SD" mode. The amplifier will automatically begin playing compatible audio files (e.g., MP3).
- Use the playback control buttons (Previous, Play/Pause, Next) or the "Folder/Track" knob to navigate and control playback. The LCD will display ID3 tag information for compatible files.
6. FM Radio Operation
- Select "FM" mode.
- The amplifier will automatically scan and store available FM stations.
- Use the Previous/Next buttons to cycle through the stored stations. The LCD will display the current frequency.
7. Microphone Usage
Image: A person singing into a microphone connected to the Pyle PDA6BU amplifier, with another microphone input visible. This image highlights the dual microphone input feature, suitable for karaoke or public address applications.
- Connect up to two 1/4" microphones to the "MIC 1" and "MIC 2" inputs on the front panel.
- Adjust the "MIC/VOL" knob to control the microphone volume.
- Use the "ECHO" knob to add an echo effect to the microphone audio.
8. Tone Controls (Bass/Treble)
Use the "BASS" and "TREBLE" knobs to adjust the low and high frequencies of the audio output according to your preference.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure the ventilation openings are clear of dust and obstructions to prevent overheating.
- Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power switch off; Incorrect voltage selection. | Check power cord connection; Turn power switch ON; Verify voltage selector (110V/220V) is correct. |
| No sound output | Incorrect input selected; Volume too low; Speaker connections loose; Mute activated. | Select correct input source; Increase MASTER VOLUME; Check speaker wire connections; Ensure unit is not muted. |
| Bluetooth not connecting | Not in Bluetooth mode; Device too far; Device not in pairing mode; Interference. | Select Bluetooth mode; Move device closer; Ensure device Bluetooth is ON and discoverable; Restart amplifier and device. |
| Poor FM reception | FM antenna not connected or extended; Weak signal. | Connect and extend FM antenna fully; Reposition antenna for better signal. |
| Microphone not working | Microphone not connected; MIC/VOL knob too low; Microphone faulty. | Ensure microphone is securely connected; Increase MIC/VOL; Test with another microphone. |
Specifications
| Power Output | 200 Watts Peak (100W RMS) |
| Speaker Impedance | 4-16 Ohms |
| Bluetooth Range | 40+ ft |
| Frequency Response | 1 KHz |
| Signal-to-Noise Ratio | 71 dB |
| Power Supply | 110V/220V Selectable |
| Dimensions (D x W x H) | 9.8" x 3.9" x 9.8" |
| Weight | 0.5 Pounds (8 ounces) |
Warranty Information
Pyle products are typically covered by a limited manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Pyle website. Keep your proof of purchase for warranty claims.
Support
For technical support, product information, or service inquiries, please visit the Pyle USA website or contact their customer service department. Refer to the official Pyle website for the most current contact information.
Online Resources:
