FITUEYES 2-Tier Computer Monitor Riser Shelf

1. Introduction

This manual provides instructions for the assembly, usage, and maintenance of your FITUEYES 2-Tier Computer Monitor Riser Shelf. This product is designed to elevate your monitor to an ergonomic height and provide additional storage space for a more organized workspace.

Image: The FITUEYES 2-Tier Computer Monitor Riser Shelf in a typical office setup, elevating a monitor and providing storage.

2. Product Features

• Ergonomic Design: Raises your monitor by 5.5 inches to eye level, promoting correct sitting posture and reducing neck and shoulder strain.
• Two-Tier Storage: Offers extra storage space to organize books, tablets, keyboards, laptops, and other office supplies, helping to declutter your desk.
• Durable Construction: Made from 15mm MDF for a sturdy and clean appearance.
• Anti-slip Stability: Equipped with rubber skids on the bottom of the legs to prevent sliding and ensure stability for heavy equipment like printers, laptops, or desktop monitors.
• Easy Assembly: Features pre-drilled holes for quick and straightforward assembly, typically completed within 5 minutes with no extra tools required.

Image: Visual comparison illustrating the ergonomic benefits of using a monitor riser to achieve a comfortable neck position.

3. Package Contents

Please check the package to ensure all components are present and undamaged:

• Top Panel (x1)
• Middle Shelf (x1)
• Side Panels (x2)
• Assembly Hardware (screws, dowels, cam locks)
• Instruction Manual (this document)

4. Assembly Instructions

Follow these steps for quick and easy assembly:

1. Step 1: Attach Side Panels to Base
   Align the pre-drilled holes on the side panels with the corresponding holes on the bottom panel. Insert the provided dowels and screws, then secure them firmly. Ensure the cam locks are correctly oriented before tightening.

   Image: Detail of screw and cam lock insertion during assembly.
2. Step 2: Insert Middle Shelf
   Slide the middle shelf into the grooves or align with the pre-drilled holes on the inner sides of the assembled side panels. Secure it using the provided hardware. Ensure it is level and stable.

   Image: Demonstrating the insertion of the middle shelf into the monitor riser frame.

3. Step 3: Attach Top Panel
   Place the top panel onto the assembled structure, aligning it with the top edges of the side panels. Secure it with the remaining hardware. Verify all connections are tight and the stand is stable before placing any items on it.

Assembly typically takes approximately 5 minutes.

5. Usage Instructions

The FITUEYES Monitor Riser is designed for versatile use to enhance your workspace:

• Monitor Elevation: Place your computer monitor or laptop on the top surface to raise it to an ergonomic viewing height. This helps align your screen with your eye level, reducing neck and back strain.
• Desk Organization: Utilize the two tiers for storing various items. The lower shelf is ideal for tucking away your keyboard or laptop when not in use, while the middle shelf can hold notebooks, pens, or other small office supplies.
• Multi-functional Use: This stand can also be used to elevate other office equipment such as printers, telephones, or fax machines, or simply to organize books and stationery.

Image: Examples of the monitor stand's versatile use for various office items and organization.

6. Care and Maintenance

• Wipe clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Keep away from direct sunlight and excessive moisture to prevent warping or damage to the wood finish.
• Periodically check all screws and connections to ensure they remain tight and secure.

7. Troubleshooting

• Issue: Stand feels wobbly after assembly.

  Solution: Ensure all screws and cam locks are fully tightened. Double-check that the side panels and shelves are correctly seated in their respective positions. If the issue persists, disassemble and reassemble carefully, paying close attention to the alignment of parts.
• Issue: Shelf does not fit or align correctly.

  Solution: Verify that the correct panels are being used for each section (top, middle, side). Sometimes, panels may appear similar but have slightly different dimensions or pre-drilled hole placements. Refer to the assembly diagrams to confirm correct orientation and placement.

8. Specifications

Image: Detailed dimensions and weight capacity of the monitor stand.

9. Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact FITUEYES customer service through their official website or the retailer where the product was purchased. Please have your model number (B01A6JLT3Q) ready when contacting support.