1. Introduction
Thank you for purchasing the ART+SOUND AR5000 Giant Water Sound System. This 2.1 stereo speaker system features a subwoofer, Bluetooth connectivity, and an integrated LED water jet light show. This manual provides essential information for setting up, operating, and maintaining your sound system to ensure optimal performance and enjoyment.
2. Package Contents
Please verify that all items listed below are included in your package:
- 2 x Tall Water Speakers
- 1 x Subwoofer
- 1 x Aux Cable
- 2 x USB to Mini-USB Cables (for speakers)
- 1 x User Manual (this document)
3. Product Overview
The ART+SOUND AR5000 system combines powerful audio with a dynamic visual experience. The system consists of two water speakers and a central subwoofer that houses the main controls and connections.
Figure 3.1: The ART+SOUND AR5000 Giant Water Sound System, showcasing the two tall water speakers with active water jets and the accompanying subwoofer unit.
Figure 3.2: A detailed view of the water jet light show within one of the speakers, illustrating the vibrant blue, green, and red lights synchronized with the water movement.
Figure 3.3: The rear panel of the subwoofer, indicating the locations for Bass control, Volume control, USB ports (USB 1, USB 2), Power input, and Power Cord connection.
4. Setup
- Placement: Position the subwoofer on a stable, flat surface. Place the two water speakers on either side of the subwoofer, ensuring they are within reach of their respective USB to mini-USB cables.
- Connect Speakers: Connect each water speaker to the subwoofer using the provided USB to mini-USB cables. The mini-USB end connects to the speaker, and the standard USB end connects to the designated USB ports on the subwoofer (refer to Figure 3.3).
- Power Connection: Connect the power cord to the subwoofer's power input and then plug it into a standard electrical outlet.
- Power On: Locate the power button on the subwoofer (refer to Figure 3.3) and press it to turn on the system. The water speakers should illuminate and the water jets may begin to activate.
5. Operating Instructions
5.1. Bluetooth Pairing
- Ensure the AR5000 system is powered on.
- Activate Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available Bluetooth devices. The AR5000 system should appear as "ART+SOUND AR5000" or similar.
- Select the AR5000 from the list to pair. A confirmation sound may indicate successful pairing.
- Once paired, you can play audio from your device, and it will stream wirelessly to the AR5000 system.
Figure 5.1: An illustration of a smartphone wirelessly connected to the ART+SOUND AR5000 system via Bluetooth, ready for audio playback.
5.2. Auxiliary (AUX) Connection
- Connect one end of the provided Aux cable to the AUX input port on the subwoofer (refer to Figure 3.3).
- Connect the other end of the Aux cable to the headphone jack or audio output of your audio device.
- The system will automatically switch to AUX input when a cable is detected, or you may need to select the input mode on the subwoofer if available.
5.3. Audio Playback and Controls
- Volume Control: Adjust the overall audio volume using the dedicated Volume knob on the subwoofer (refer to Figure 3.3).
- Bass Control: Fine-tune the bass level using the Bass knob on the subwoofer to enhance your listening experience (refer to Figure 3.3).
- Water Jet Light Show: The integrated LED water jet light show automatically synchronizes with the audio playback, creating a dynamic visual display. The intensity and movement of the water jets are responsive to the music.
6. Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior surfaces of the speakers and subwoofer. Do not use abrasive cleaners or solvents.
- Water Speakers: The water within the speakers is sealed. Do not attempt to open or refill the water chambers. Any attempt to do so may damage the product and void the warranty.
- Storage: When not in use for extended periods, store the system in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your ART+SOUND AR5000 system, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power outlet not active; System not turned on. | Ensure the power cord is securely plugged into the subwoofer and a working electrical outlet. Press the power button on the subwoofer. |
| No sound | Volume too low; Incorrect input source selected; Device not paired (Bluetooth); Aux cable not connected properly. | Increase the volume on both the subwoofer and your audio device. Ensure the correct input (Bluetooth/AUX) is active. Re-pair your Bluetooth device or re-connect the Aux cable. |
| Bluetooth pairing failure | Device too far; Bluetooth not enabled on device; Interference; System already paired to another device. | Move your device closer to the subwoofer. Ensure Bluetooth is enabled on your device. Disconnect from other Bluetooth devices. Try restarting both the AR5000 and your device. |
| Water jets not working or weak | No audio playing; Volume too low; Internal malfunction. | Ensure audio is playing and the volume is at a reasonable level, as water jets react to sound. If the issue persists, contact customer support. |
8. Specifications
| Model Name | AR5000 |
| Item Model Number | AR5000BK |
| Brand | ART+SOUND |
| Speaker Type | Subwoofer (2.1 Stereo System) |
| Special Feature | LED Water Jet Light Show, Bluetooth Connectivity |
| Recommended Uses | For Smartphones, Tablets |
| Compatible Devices | Smartphone, Tablet |
| Surround Sound Channel Configuration | 2.1 |
| Colour | Black |
| Item Weight | 2.72 kg (2 kg 720 g) |
| Is Waterproof | TRUE (referring to sealed water chambers) |
| Control Method | Touch (on subwoofer controls) |
| Wireless Communication Technology | Bluetooth |
| Power Source | AC |
| Connectivity Technology | Auxiliary, Bluetooth, USB |
| Audio Output Mode | Stereo |
| Mounting Type | Tabletop Mount |
| Product Dimensions (LxWxH) | 38.1 x 18.4 x 39.4 Centimeters |
| UPC | 680079350000 |
9. Safety Information
- Read all instructions before operating the device.
- Do not expose the unit to dripping or splashing water, and do not place objects filled with liquids, such as vases, on the unit.
- Ensure proper ventilation around the unit. Do not block any ventilation openings.
- Do not place the unit near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10. Warranty and Support
Specific warranty details for the ART+SOUND AR5000 Giant Water Sound System are not provided within this manual. Please refer to the product packaging, any included warranty cards, or the manufacturer's official website for comprehensive warranty information and customer support contact details.
