Ovation CS28P-RG Celebrity Standard Exotic Acoustic-Electric Guitar User Manual

Introduction

The Ovation CS28P-RG Celebrity Standard Exotic Super Shallow Depth Acoustic-Electric Guitar is designed to offer a blend of classic acoustic tone and modern amplified performance. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your instrument to ensure optimal performance and longevity.

Figure 1: Ovation CS28P-RG Celebrity Standard Exotic Acoustic-Electric Guitar, Caribbean Blue Burst.

Setup

1. Unpacking and Initial Inspection

Carefully remove the guitar from its packaging. Inspect the instrument for any signs of damage that may have occurred during shipping. Ensure all included accessories, such as the guitar itself, are present.

2. Tuning the Guitar

The CS28P-RG is equipped with an integrated OP-4BT preamp system that includes an onboard tuner. To tune your guitar:

1. Locate the OP-4BT preamp on the upper bout of the guitar.
2. Press the 'Tuner' button to activate the onboard tuner. The display will illuminate.
3. Pluck each string individually. The display will show the note being played and indicate if it is sharp, flat, or in tune.
4. Adjust the corresponding tuning machine head until the display indicates the string is in tune.
5. Repeat for all six strings (E, A, D, G, B, e).
6. Press the 'Tuner' button again to deactivate the tuner.

3. Connecting to an Amplifier or PA System

To amplify your guitar's sound:

1. Ensure your amplifier or PA system is turned off and its volume is set to minimum.
2. Connect a standard 1/4-inch instrument cable to the guitar's output jack, located at the bottom of the guitar body.
3. Connect the other end of the cable to the input of your amplifier or PA system.
4. Turn on your amplifier or PA system and gradually increase its volume to a desired level.
5. Adjust the guitar's volume and EQ settings using the OP-4BT preamp controls.

Operating the OP-4BT Preamp System

The Ovation OP-4BT preamp system provides comprehensive control over your amplified tone:

• Volume/Gain Control: Adjusts the overall output level of the amplified signal.
• 3-Band EQ:
  • Bass: Controls the low-frequency response.
  • Mid: Controls the mid-range frequency response.
  • Treble: Controls the high-frequency response.
• Onboard Tuner: Activates the built-in chromatic tuner (as described in the Setup section).
• Low-Battery Light: Illuminates when the battery level is low, indicating it's time for replacement.

Maintenance

1. Cleaning and Care

• Wipe down the guitar body, neck, and strings with a soft, lint-free cloth after each use to remove sweat and oils.
• For a deeper clean, use guitar-specific cleaning and polishing products. Avoid harsh chemicals.
• Store the guitar in a stable environment, away from extreme temperature changes and humidity, preferably in a guitar case.

2. String Replacement

Strings should be replaced regularly to maintain optimal tone and playability. Refer to standard acoustic guitar string replacement guides for detailed instructions. The guitar uses Bronze string material and Medium string gauge.

3. Battery Replacement

The OP-4BT preamp system requires 1 product-specific alkaline battery (included). When the low-battery light illuminates, replace the battery promptly to ensure continued functionality of the preamp and tuner.

1. Locate the battery compartment on the preamp unit.
2. Open the compartment and remove the old battery.
3. Insert a new alkaline battery, ensuring correct polarity.
4. Close the battery compartment securely.

Troubleshooting

• No Sound When Plugged In:
  • Check if the instrument cable is securely connected at both ends.
  • Ensure the amplifier/PA system is powered on and its volume is up.
  • Verify the guitar's volume/gain control on the preamp is not set to minimum.
  • Check the battery in the preamp; replace if the low-battery light is on.
• Buzzing Strings:
  • Ensure the strings are properly seated in the bridge and nut.
  • Check for proper neck relief and string action. Adjustments may require a qualified technician.
  • Verify that all tuning machine components are secure.
• Poor Tone/Distortion:
  • Adjust the 3-band EQ controls on the preamp.
  • Check the gain setting on the preamp; excessive gain can cause distortion.
  • Inspect the instrument cable for damage.

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Ovation website or contact their customer service department. Keep your proof of purchase for any warranty claims.

Online resources and FAQs may also be available on the manufacturer's website to assist with common questions and issues.