Honeywell Home DCP917S Wireless Converter Instruction Manual

1. Introduction

The Honeywell Home DCP917S Wireless Converter is designed to seamlessly integrate a traditional wired push button with a Honeywell wireless doorbell system. This device allows you to modernize your existing wired doorbell setup into a wireless radio system, offering enhanced flexibility and convenience. It features easy installation and includes a low battery indicator for timely maintenance.

Figure 1: Honeywell Home DCP917S Wireless Converter. This image shows the compact, white rectangular unit with the "Honeywell Home" logo on its front face.

2. Safety Information

Please read all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Ensure power is disconnected before performing any wiring or installation.
• Do not expose the device to moisture or extreme temperatures.
• Use only the specified battery type (CR2 Lithium) for replacement.
• Keep out of reach of children.
• If the device is damaged, do not attempt to repair it. Contact qualified personnel for service.

3. Package Contents

Verify that all components are present in the package:

• 1x Honeywell Home DCP917S Wireless Converter
• 1x CR2 Lithium Battery (pre-installed or separate)
• 1x Certificate of Conformity
• 1x Instruction Manual (this document)

4. Setup and Installation

The DCP917S converter is designed for easy installation, allowing you to connect your existing wired doorbell push button to a Honeywell wireless chime. Ensure power to your existing doorbell system is turned off at the main circuit breaker before proceeding.

4.1 Wiring the Converter

1. Disconnect Power: Turn off the power supply to your existing wired doorbell system at the circuit breaker.
2. Access Existing Wiring: Locate the wiring for your current wired doorbell push button.
3. Connect Wires: Connect the wires from your existing wired push button to the terminals on the DCP917S converter. The converter is designed to adapt to standard connectors. Refer to the wiring diagram below for correct connections.
4. Mount the Converter: Securely mount the converter in a suitable location, typically near your existing doorbell wiring. It can be placed inside an electrical box or mounted on a wall.

Figure 2: Internal view of the DCP917S converter showing wiring terminals. This image displays the converter with its cover removed, revealing the circuit board and connection points for the wired doorbell input.

Figure 3: DCP917S converter installed on a wall. This image shows the white converter unit discreetly mounted on a white wall, with wires neatly routed along the baseboard.

4.2 Pairing with a Wireless Chime

After wiring the converter, you need to pair it with your Honeywell wireless chime. The exact pairing procedure may vary slightly depending on your specific chime model. Refer to your wireless chime's instruction manual for detailed pairing instructions. Generally, the process involves:

1. Activate Pairing Mode on Chime: Put your Honeywell wireless chime into pairing mode (usually by pressing a specific button for a few seconds).
2. Activate Converter: Press the wired push button connected to the DCP917S converter. This sends a signal to the chime.
3. Confirmation: The chime should indicate successful pairing (e.g., a specific sound, light flash).

Figure 4: Wiring and pairing diagrams for Honeywell Home doorbell systems. This image displays multiple diagrams illustrating how to integrate the DCP917S converter with existing wired doorbells and various wireless chimes and accessories.

Note: Some users have reported that the pairing instructions provided with the converter might be basic. If you encounter difficulties, consult the full manual for your specific Honeywell wireless chime model or the Honeywell Home support website for detailed pairing guides.

5. Operating Instructions

Once installed and paired, the Honeywell Home DCP917S Wireless Converter operates automatically. When the wired push button is pressed, the converter sends a wireless signal to your paired Honeywell wireless chime, which then sounds the selected melody.

• Wired Push Button Activation: Pressing your existing wired doorbell push button will trigger the wireless chime.
• Low Battery Indicator: The converter features a low battery indicator. When the battery is low, the indicator light (if present) will illuminate or flash, signaling that the CR2 Lithium battery needs replacement.

6. Maintenance

6.1 Battery Replacement

The DCP917S converter is powered by one CR2 Lithium battery. When the low battery indicator activates, replace the battery promptly to ensure continuous operation.

1. Disconnect Power: Turn off the power supply to the doorbell system at the circuit breaker before opening the converter.
2. Open Converter: Carefully open the converter casing.
3. Remove Old Battery: Remove the old CR2 Lithium battery.
4. Insert New Battery: Insert a new CR2 Lithium battery, ensuring correct polarity.
5. Close Converter: Securely close the converter casing.
6. Restore Power: Turn the power supply back on at the circuit breaker.

6.2 Cleaning

Clean the exterior of the converter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing.

7. Troubleshooting

• Chime Not Sounding:
  • Check if the converter's battery is low and replace if necessary.
  • Ensure the converter is correctly wired to the wired push button.
  • Verify that the converter is properly paired with the wireless chime. Repeat the pairing process if unsure.
  • Check the range between the converter and the chime. Obstacles like thick walls or metal objects can reduce signal strength.
  • Ensure the wireless chime itself is powered on and functioning.
• Intermittent Operation:
  • This could indicate a weak battery in the converter. Replace the CR2 Lithium battery.
  • Check for sources of wireless interference near the converter or chime.
• Difficulty Pairing:
  • Ensure both the converter and the chime are in pairing mode simultaneously.
  • Refer to the specific pairing instructions for your Honeywell wireless chime model.
  • Try moving the chime closer to the converter during the pairing process.

8. Specifications

9. Warranty and Support

Honeywell Home products are designed for reliability and quality. Spare parts availability is guaranteed for 1 year from the date of purchase.

For technical support, warranty claims, or further assistance, please visit the official Honeywell Home website or contact their customer service department. Keep your proof of purchase for warranty purposes.

Online Resources: For the most up-to-date information, detailed FAQs, and additional support, please visit the official Honeywell Home support portal.