1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ariston ANDRIS LUX 30L electric water heater. Please read these instructions carefully before installation and use, and retain them for future reference.
Figure 1: Front view of the Ariston ANDRIS LUX 30L Electric Water Heater.
Key Features:
- Capacity: 30 Liters
- Power: 2000 Watts
- Installation Type: Over-sink
- Compact Design: Suitable for small spaces.
- Anti-corrosion Protection: Enameled steel tank and magnesium anode.
- Anti-limescale: Armored heating element.
- Rapid Heating: Provides hot water quickly.
- Manual Temperature Control: Adjustable thermostat.
2. Safety Information
Always adhere to local regulations and safety standards during installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death.
General Safety:
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not operate the water heater if it is damaged or malfunctioning.
- Ensure the appliance is properly grounded.
Electrical Safety:
- Before any maintenance or repair, disconnect the appliance from the main power supply.
- The electrical installation must comply with national electrical safety standards.
- Do not use extension cords or adapters.
3. Product Overview
The Ariston ANDRIS LUX 30L is designed for efficient hot water delivery in a compact form factor. It features robust construction for durability and ease of use.
Figure 2: Internal structure highlighting anti-corrosion features (enameled tank, magnesium anode) and the armored heating element.
Main Components:
- Enameled Steel Tank: Provides corrosion resistance and durability.
- Magnesium Anode: Sacrificial anode for enhanced anti-corrosion protection.
- Armored Heating Element: Designed to resist limescale buildup.
- Thermostat: For manual temperature adjustment.
- Heating Indicator Light: Illuminates when the water heater is actively heating.
Figure 3: Manual thermostat for temperature adjustment and the red heating indicator light.
4. Installation
Installation should be performed by a qualified professional in accordance with all applicable local codes and regulations.
Pre-installation Checks:
- Verify that the chosen installation location can support the weight of the water heater when full (approximately 42 kg for 30L).
- Ensure adequate clearance for maintenance and ventilation.
- Confirm that the electrical supply matches the appliance's requirements (2000W).
Figure 4: Components included for installation, such as the wall mount bracket, screws, and dielectric fittings.
Mounting:
- Mark the drilling points for the wall mount bracket using the provided template or measurements.
- Drill holes and insert the supplied dowels.
- Secure the wall mount bracket firmly to the wall using the provided screws.
- Carefully lift the water heater and hang it onto the wall mount bracket.
Plumbing Connection:
- Connect the cold water inlet (blue ring) to the main cold water supply using the dielectric fittings.
- Connect the hot water outlet (red ring) to the hot water distribution system.
- Install a safety valve (not always included, check local regulations) on the cold water inlet.
- Open the hot water tap at a nearby faucet to allow air to escape while the tank fills.
- Once water flows steadily from the hot water tap, close the tap and check all connections for leaks.
Electrical Connection:
- Ensure the main power supply is OFF at the circuit breaker.
- Connect the pre-wired power supply cable to a dedicated, properly grounded electrical outlet or junction box.
- Verify all electrical connections are secure and insulated.
- Restore power to the circuit breaker.
5. Operating Instructions
First Use:
- Ensure the water heater tank is completely filled with water (as described in Plumbing Connection).
- Turn on the electrical power to the appliance.
- The heating indicator light will illuminate, indicating that the water heater is actively heating the water.
Temperature Adjustment:
- The water temperature can be adjusted using the manual thermostat knob located on the front panel.
- Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it.
- Allow sufficient time for the water to heat up after adjusting the setting.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your water heater. Always disconnect power before performing any maintenance.
Annual Checks:
- Safety Valve: Periodically operate the safety valve to ensure it is not blocked.
- Anode Inspection: The magnesium anode should be inspected annually and replaced if significantly corroded. This helps protect the tank from corrosion.
- Heating Element Descaling: In areas with hard water, the heating element may accumulate limescale. This should be cleaned periodically by a qualified technician to maintain efficiency.
- Leak Inspection: Check all plumbing connections for any signs of leaks.
7. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, or if solutions do not resolve the issue, contact a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | No power supply Thermostat set too low Heating element failure | Check circuit breaker Adjust thermostat to a higher setting Contact a qualified technician |
| Water not hot enough | Thermostat set too low Excessive hot water demand Limescale buildup on element | Increase thermostat setting Allow more time for reheating Descale heating element (professional service recommended) |
| Water leaking | Loose plumbing connections Safety valve discharge Tank corrosion | Tighten connections This is normal during heating; ensure proper drainage Contact a qualified technician |
| No heating indicator light | No power supply Light malfunction | Check power supply Contact a qualified technician |
8. Specifications
Technical details for the Ariston ANDRIS LUX 30L Electric Water Heater.
Figure 5: Dimensions of the Ariston ANDRIS LUX 30L water heater (Front and Side views).
| Feature | Detail |
|---|---|
| Model Number | 3100326 |
| Capacity | 30 Liters |
| Power | 2000 Watts |
| Voltage | Standard household voltage (check local requirements) |
| Dimensions (L x W x H) | 41 x 44.7 x 44.7 cm |
| Weight (empty) | 12 Kilograms |
| Material | Steel, Magnesium |
| Installation Type | Over-sink (Mural) |
| Energy Efficiency Class | C |
| Origin | Italy |
9. Warranty and Support
Ariston provides a warranty for this product against manufacturing defects under normal use and service conditions.
Warranty Details:
- Tank Warranty: 3 years
- Parts Warranty: 2 years
- The product is certified compliant with French and European electrical and mechanical safety standards (CE certified).
For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Ariston website.