Bodi-Tek Circulation Plus Active Foot Massager Instruction Manual

1. Introduction

The Bodi-Tek Circulation Plus Active Foot Massager, model BT-CRBO3, is designed to provide a stimulating massage to the lower legs and feet. Utilizing advanced Electrical Muscle Stimulation (EMS) technology, this device aims to promote muscle activity and can assist in improving circulation in healthy individuals. It features multiple programs, adjustable intensity levels, and a convenient remote control for ease of use.

Image: Top-down view of the Bodi-Tek Circulation Plus Active Foot Massager, showing the footpads, central display, and control buttons.

2. Important Safety Information

Please read all instructions carefully before using this product and retain for future reference. Failure to follow these instructions could result in injury or damage to the device.

• Medical Consultation: If you have any medical conditions, including but not limited to heart conditions, diabetes, or circulatory disorders, consult your doctor before using the Circulation Plus Active.
• Pacemakers: This product is not suitable for individuals fitted with a pacemaker or any other implanted electronic medical device.
• Pregnancy: Do not use if you are pregnant.
• Open Wounds/Skin Conditions: Do not use on areas with open wounds, rashes, or irritated skin.
• Children: Keep out of reach of children. This device is not a toy.
• Water Exposure: Do not immerse the device in water or use it in damp environments.
• Power Supply: Use only the provided power adapter. Ensure the voltage is compatible with your local power supply.
• Maintenance: Do not attempt to repair or modify the device yourself. Refer all servicing to qualified personnel.

3. Product Components

The Bodi-Tek Circulation Plus Active Foot Massager package includes:

• Circulation Plus Active Foot Massager Unit
• Remote Control (requires 1 CR2032 battery, usually included)
• Power Adapter
• Instruction Manual (this document)

Image: Angled view of the foot massager unit.

Image: Hand holding the remote control, showing buttons for power, mode, and intensity adjustment.

4. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Placement: Place the Circulation Plus Active unit on a flat, stable surface in a comfortable position where you can sit and place your feet on the footpads.
3. Power Connection: Insert the power adapter into the DC input port on the side of the unit. Plug the other end of the adapter into a suitable electrical outlet.
4. Remote Control Battery: If not already installed, open the battery compartment on the remote control and insert one CR2032 battery, ensuring correct polarity.

5. Operating Instructions

The Bodi-Tek Circulation Plus Active is designed for easy operation using either the on-unit controls or the remote control.

5.1 Getting Started

1. Sit comfortably and place your bare feet on the designated footpads of the unit. Ensure your feet are clean and dry.
2. Press the Power button on the unit or remote control to turn on the device. The display will illuminate.
3. The device will typically start on a default program and intensity level.

Image: A user's feet positioned on the foot massager, illustrating the intended stimulation path for circulation.

5.2 Selecting Programs (Modes)

The device offers three distinct programs (modes) to vary the massage experience.

• Press the MODE button on the unit or remote control to cycle through the available programs.
• The current program number will be displayed on the central screen.
• Experiment with each program to find the one that best suits your preference.

5.3 Adjusting Intensity

The Circulation Plus Active features 99 adjustable intensity levels.

• Use the '+' and '-' buttons on the unit or remote control to increase or decrease the intensity.
• Start at a low intensity and gradually increase it until you feel a comfortable, yet noticeable, muscle contraction. Avoid setting the intensity too high, which may cause discomfort.
• The current intensity level will be displayed on the central screen.

5.4 Session Duration

The device has a pre-set session duration, typically around 25-30 minutes. The remaining time will be shown on the display.

• The device will automatically switch off once the session is complete.
• You can manually turn off the device at any time by pressing the Power button.

6. Maintenance and Care

• Cleaning: Disconnect the device from the power outlet before cleaning. Wipe the unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Replacement: Replace the CR2032 battery in the remote control when its performance diminishes. Ensure proper disposal of used batteries according to local regulations.

7. Troubleshooting

8. Specifications

Image: Top-down view of the foot massager with its approximate dimensions labeled.

9. Warranty and Customer Support

For warranty information, technical support, or any inquiries regarding your Bodi-Tek Circulation Plus Active Foot Massager, please refer to the warranty card included with your product or contact the manufacturer directly.

Manufacturer: The Dezac Group Ltd

Please retain your proof of purchase for warranty claims.