Haotian FST16-SCH

Haotian FST16-SCH Rocking Chair

Instruction Manual

1. Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

  • Weight Capacity: Do not exceed the maximum weight capacity of 120 kg (264.55 lbs) to ensure the stability and safety of the chair.
  • Assembly: This product requires minimal assembly. Ensure all parts are correctly fitted and tightened before use. Improper assembly can lead to instability and injury.
  • Placement: Use the chair on a hard, flat surface for optimal rocking motion and stability.
  • Children: Keep children away from the assembly area. Do not allow children to play on or around the chair unsupervised.

2. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support.

  • Birch wood frame components
  • Black poly-cotton fabric cushion with headrest and footrest sections
  • Assembly hardware (screws, washers, etc.)
  • User Manual (this document)

3. Setup and Assembly Instructions

The Haotian FST16-SCH rocking chair is designed for straightforward self-assembly. Follow these steps carefully.

Close-up of the birch wood frame connection points with screws

Image: Close-up of the birch wood frame connection points. Ensure all screws are securely fastened.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Assemble Frame: Connect the various birch wood frame components using the provided hardware. Ensure that all connections are aligned correctly before tightening screws. Do not overtighten initially.
  3. Secure Frame: Once all frame pieces are in place, gradually tighten all screws until the frame is firm and stable.
  4. Attach Cushion: Place the black poly-cotton fabric cushion onto the assembled frame. The cushion is designed to fit snugly.
  5. Fasten Cushion: Secure the cushion to the frame using the integrated hook-and-loop fasteners (velcro) located on the underside of the cushion and corresponding areas on the frame. This prevents the cushion from shifting during use.
Person attaching the black fabric cushion to the chair frame using velcro strips

Image: Attaching the cushion with hook-and-loop fasteners for a secure fit.

After assembly, gently rock the chair to ensure all connections are secure and the chair is stable before full use.

4. Operating Instructions

The Haotian FST16-SCH rocking chair features an adjustable footrest for enhanced comfort.

Series of six images showing the footrest adjusting from a folded position to fully extended

Image: The footrest can be adjusted to multiple positions for personalized comfort.

  • Adjusting the Footrest: To adjust the footrest, gently lift the footrest section. It will click into various reclining positions. Select the desired angle for your comfort.
  • Lowering the Footrest: To lower the footrest, lift it to its highest point, then push it down to release the locking mechanism. Guide it back to the folded position.
  • Rocking Motion: The chair provides a gentle rocking motion. Ensure sufficient space around the chair to avoid hitting walls or furniture.

5. Maintenance

Proper care will extend the life and appearance of your rocking chair.

  • Cushion Care: The poly-cotton fabric cushion is washable. It is recommended to clean it using upholstery shampoo according to the product's instructions. Allow to air dry completely.
  • Frame Care: The birch veneer frame has a clear acrylic lacquer finish. Wipe the frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.

6. Troubleshooting

If you encounter issues with your rocking chair, consider the following:

  • Instability: If the chair feels wobbly, recheck all assembly connections and tighten any loose screws. Ensure the chair is on a level surface.
  • Footrest Not Adjusting: Ensure no obstructions are preventing the footrest mechanism from engaging. Lift the footrest fully before attempting to lower it.
  • Rocking Difficulty: The chair is designed for a gentle rock. Ensure it is placed on a hard floor for optimal movement. Carpets may reduce the rocking range.

7. Specifications

Diagram showing the dimensions of the rocking chair: Seat size 56x50cm, Back size 56x74cm, Overall dimensions 31.4D x 22W x 35.4H inches

Image: Detailed dimensions of the Haotian FST16-SCH Rocking Chair.

Model NumberFST16-SCH (43305-11912)
BrandHaotian
ColorBlack
MaterialBirch wood frame, Poly-cotton fabric cushion, Foam fill
Product Dimensions (D x W x H)31.4" x 22" x 35.4" (79.76 cm x 55.88 cm x 89.92 cm)
Seat Size (L x W)56 cm x 50 cm
Back Size (L x W)56 cm x 74 cm
Item Weight22 Pounds (10 kg)
Maximum Weight Recommendation120 kg (264.55 lbs)
Reclining Position Count5
Indoor/Outdoor UsageIndoor

8. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact Haotian customer service directly. Keep your proof of purchase for any warranty claims.

Contact Information: Please visit the official Haotian website or refer to your purchase receipt for current customer service contact details.

© 2023 Haotian. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.