Kohler PureWash M250 Manual Elongated Bidet Toilet Seat

Product Overview

The Kohler PureWash M250 Manual Elongated Bidet Toilet Seat offers enhanced personal cleansing with a sleek, low-profile design. This non-electric bidet seat connects directly to your toilet's water supply, providing adjustable cool-water cleansing without the need for batteries or electrical outlets. It features a quiet-close lid and seat, and quick-release hinges for easy cleaning.

Front view of the Kohler PureWash M250 Manual Elongated Bidet Toilet Seat with its lid slightly open, showcasing its sleek design.

Setup and Installation

Installation of the PureWash M250 is designed to be quick and easy, requiring no electricity. The seat connects directly to your toilet's existing water supply line.

Before You Begin

• Ensure your toilet is an elongated model for proper fit.
• Locate your toilet's water supply shut-off valve.
• Review the Installation Manual (PDF) for detailed instructions and diagrams.

Installation Steps

1. Turn off the water supply to your toilet at the shut-off valve.
2. Flush the toilet to drain the tank.
3. Disconnect the existing water supply line from the toilet tank.
4. Install the provided T-valve between the toilet tank and the water supply line.
5. Connect the bidet seat's supply hose to the T-valve.
6. Use the Quick-Attach hardware to securely fasten the bidet seat to your toilet bowl.
7. Slowly turn on the water supply and check for any leaks.

The Kohler PureWash M250 bidet seat installed on a toilet, highlighting its easy, non-electric setup.

Operating Instructions

The PureWash M250 provides a refreshing cool-water cleanse with intuitive manual controls.

Adjusting Spray Position and Pressure

• The bidet features a single wand for cleansing.
• Use the convenient side handle to adjust both the water spray position and pressure to your preference.
• The self-cleaning wand automatically rinses itself after each use, ensuring hygiene.

Close-up view of the manual control handle on the side of the bidet seat, used for adjusting spray settings.

Illustration showing the adjustable spray position and water pressure from the bidet wand.

Maintenance

Regular cleaning ensures the longevity and hygiene of your bidet toilet seat.

Cleaning the Bidet Seat

• The Quick-Release functionality allows the entire toilet seat to be easily removed from the toilet for thorough cleaning.
• Simply press the quick-release buttons (if applicable) or lift the seat from its mounting hardware.
• Clean the seat and toilet surface with mild soap and water. Avoid abrasive cleaners.
• The self-cleaning wand automatically rinses after each use, minimizing manual cleaning of the nozzle.

The Kohler PureWash M250 bidet seat with its lid and seat raised, showing the ease of access for cleaning.

Troubleshooting

If you encounter any issues with your Kohler PureWash M250 bidet seat, please refer to the following common solutions:

• No Water Spray: Ensure the water supply valve to the toilet is fully open. Check that the bidet's supply hose is securely connected and not kinked.
• Weak Water Pressure: Verify the water supply valve is fully open. Adjust the bidet's control handle to increase pressure.
• Leaks: Check all connections (T-valve, supply hoses) for tightness. Ensure washers are properly seated. Do not overtighten.
• Seat Not Closing Quietly: Inspect the quiet-close hinges for any obstructions or damage. Clean the hinge area.

If problems persist after attempting these steps, please contact Kohler customer support for further assistance.

Specifications

Warranty Information

The Kohler PureWash M250 Manual Elongated Bidet Toilet Seat is covered by the KOHLER One-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service.

For full details regarding warranty coverage, terms, and conditions, please refer to the official Kohler warranty documentation included with your product or visit the Kohler website.

Support

For additional support, product registration, or to explore other Kohler products, please visit the official KOHLER Store or contact customer service.

• Official KOHLER Store: Visit the KOHLER Store
• Installation Manual: Download PDF