Introduction
The Creative Memories 2-Way Corner Rounder is a versatile tool designed for paper crafting and scrapbooking projects. It allows users to create two distinct corner finishes: a classic rounded corner and a unique reverse-curve notch. Engineered for durability, this tool is built to provide consistent performance for a long time, enhancing the aesthetic appeal of your paper-based creations.
Figure 1: Top view of the Creative Memories 2-Way Corner Rounder.
Features
- Dual Functionality: Creates two unique cuts (1/4-inch radius): traditional curved corners and distinctive notched corners.
- Integrated Scrap Catcher: Features a convenient scrap catcher on the bottom to collect cut paper pieces, ensuring a clean workspace.
- Durable Construction: Manufactured from high-quality, professional-grade materials for long-lasting use.
- Versatile Application: Suitable for use on various paper materials including standard paper, cardstock, mats, and photos.
- Exclusive Design: Designed specifically for Creative Memories products and crafting needs.
Figure 2: Bottom view of the corner rounder, highlighting the scrap catcher.
Setup
The Creative Memories 2-Way Corner Rounder requires no assembly. It is ready for use directly out of the packaging. Ensure the tool is clean and free of any debris before first use.
Operating Instructions
This tool offers two distinct cutting options for your paper crafting needs.
1. Creating Rounded Corners
- Identify the side of the tool designed for rounded cuts. This is typically the side with a convex curve.
- Align the corner of your paper, cardstock, or photo precisely into the designated slot on the rounded corner side. Ensure the paper is pushed firmly against both guides within the slot.
- Press down firmly on the blue lever of the tool until you hear a clean cut.
- Release the lever and remove your material. The corner should now be perfectly rounded.
Figure 3: Demonstrating the use of the corner rounder for a standard rounded cut.
2. Creating Notched (Reverse-Curve) Corners
- Locate the side of the tool designed for notched cuts. This side will have a concave curve or a different guide shape.
- Insert the corner of your material into this slot, ensuring it is fully seated against the internal guides.
- Apply firm pressure to the blue lever to execute the cut.
- Remove your material. The corner will now feature a unique reverse-curve notch.
Figure 4: Visual comparison of a rounded corner (right) and a notched corner (left).
Figure 5: Step-by-step visual guide for using the corner rounder.
Maintenance
- Emptying the Scrap Catcher: Regularly empty the integrated scrap catcher located on the bottom of the tool. To do this, gently slide open the cover on the underside and discard the paper scraps.
- Cleaning: Use a soft, dry cloth to wipe down the exterior of the tool. Avoid using abrasive cleaners or solvents.
- Blade Care: The blades are designed for longevity. Do not attempt to sharpen or replace the blades yourself, as this may damage the tool and void any potential warranty.
- Storage: Store the corner rounder in a dry place, away from direct sunlight and extreme temperatures, to preserve its materials and functionality.
Figure 6: Opening the scrap catcher for maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven or incomplete cuts | Paper not fully inserted or misaligned. Too many sheets inserted. Dull blade (unlikely for new product). | Ensure paper is pushed firmly against both guides. Cut one sheet at a time. If problem persists after extended use, contact customer support. |
| Tool feels stiff or difficult to press | Accumulation of paper dust or debris. | Empty the scrap catcher and clean the cutting mechanism area with a soft brush or compressed air. |
| Scraps not collecting in catcher | Catcher cover not properly closed or damaged. | Ensure the scrap catcher cover is securely closed after emptying. Inspect for damage. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Creative Memories |
| Model Number | FBA_171500 |
| Material | High-quality professional-grade materials |
| Color | Blue and White (with silver metal components) |
| Operation Mode | Manual |
| Item Weight | 18.14 g (0.64 ounces) |
| Product Dimensions (L x W x H) | 8 x 6 x 3 inches |
| Corner Radius | 1/4 inch |
Warranty Information
Specific warranty details for the Creative Memories 2-Way Corner Rounder are not provided in this manual. Please refer to the product packaging or the official Creative Memories website for comprehensive warranty information and terms.
Customer Support
For further assistance, technical support, or inquiries regarding your Creative Memories 2-Way Corner Rounder, please visit the official Creative Memories website or contact their customer service department. Contact information is typically available on the product packaging or their official online portal.
You can visit the Creative Memories Store on Amazon: Creative Memories Store