Introduction
This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your S.T.Dupont MaxiJet Lighter Punch. Please read this manual thoroughly before operating the device and retain it for future reference.
Image 1: Front view of the S.T.Dupont MaxiJet Lighter Punch, featuring a matte black finish with a red side panel and the S.T.Dupont logo.
Safety Information
WARNING: Keep out of reach of children. This product contains flammable gas under pressure. Misuse can cause injury or death.
- Do not expose to heat above 50°C (122°F) or prolonged sunlight.
- Do not puncture or incinerate the lighter.
- Ensure the flame is extinguished after each use.
- Do not attempt to disassemble or repair the lighter yourself.
- Use only S.T.Dupont recommended butane gas for refilling.
- Avoid contact with skin and eyes when refilling.
- Use in a well-ventilated area.
Setup
Fueling the Lighter
The S.T.Dupont MaxiJet Lighter is shipped without gas. It requires high-quality butane gas for operation. Using incorrect gas can damage the lighter and void the warranty.
- Ensure the lighter is completely cool before refilling.
- Invert the lighter, locating the refill valve at the bottom.
- Press the nozzle of the butane gas can firmly and vertically into the refill valve.
- Hold for approximately 5-10 seconds. Repeat if necessary until the fuel window indicates a full level.
- Wait a few minutes after refilling before attempting to ignite the lighter to allow the gas to stabilize.
Image 2: Bottom view of the MaxiJet Lighter, highlighting the gas refill valve and flame adjustment screw.
Operating Instructions
Igniting the Lighter
- Hold the lighter upright.
- Press the ignition button located on the side of the lighter. This will open the cap and activate the ignition system, producing a powerful blue torch flame.
- Release the button to extinguish the flame and close the cap.
Adjusting the Flame
The flame height can be adjusted using the screw located at the bottom of the lighter, next to the refill valve.
- Use a small flat-head screwdriver or a similar tool.
- Turn clockwise to decrease the flame height.
- Turn counter-clockwise to increase the flame height.
- Adjust gradually and test the flame after each adjustment.
Image 3: Side view of the MaxiJet Lighter, showing the ignition button and the sleek profile.
Maintenance
Cleaning
- Wipe the exterior of the lighter with a soft, dry cloth.
- Do not use abrasive cleaners or solvents, as these can damage the finish.
- Periodically check the burner nozzle for any debris and gently clear it if necessary (ensure lighter is unlit and cool).
Gas Level Check
The lighter features a gas level window to indicate the remaining fuel. Refill when the level is low to ensure consistent performance.
Image 4: Side view of the MaxiJet Lighter, illustrating the gas level indicator window.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lighter does not ignite. | No gas or low gas level. | Refill with S.T.Dupont recommended butane gas. |
| Flame adjustment too low. | Increase flame height using the adjustment screw. | |
| Air in the gas tank. | Purge the lighter before refilling. (Press refill valve with a small tool until all gas/air escapes). | |
| Inconsistent or weak flame. | Low gas level or impurities in gas. | Refill with fresh, high-quality butane gas. |
| Burner nozzle obstructed. | Gently clean the burner nozzle. |
If problems persist after attempting these solutions, please contact S.T.Dupont customer support or an authorized service center.
Specifications
| Model Number | D-020160N |
| Brand | S.T.Dupont (Distributed by Stratton Essential Supply) |
| Color | Punch Black and Red |
| Material | Metal |
| Dimensions (L x W x H) | 1.46" x 0.51" x 2.56" (3.7cm x 1.3cm x 6.5cm) |
| Item Weight | 2.22 ounces (0.06 Kilograms) |
| Fuel Type | Liquefied Petroleum Gas (Butane) |
| Flame Type | Single Blue Torch Flame |
Warranty and Support
This S.T.Dupont product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and claim procedures.
For technical support, service, or warranty claims, please contact your authorized S.T.Dupont retailer or visit the official S.T.Dupont website for contact information.
Note: Using non-approved fuel or attempting unauthorized repairs may void your warranty.
