Sangean Portable AM/FM Analog Pocket Radio User Manual

1. Introduction

Thank you for purchasing the Sangean Portable AM/FM Analog Pocket Radio. This compact and portable radio is designed for convenient listening to your favorite AM and FM stations. With its built-in speaker, earphone jack, and LED tuning indicator, it offers clear and static-free audio enjoyment wherever you go. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Important Safety Information

• Water and Moisture: Do not expose the radio to rain, moisture, or dripping/splashing liquids. Keep it away from water sources like sinks, bathtubs, or swimming pools.
• Heat: Do not place the radio near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
• Cleaning: Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Batteries: Use only the specified type of batteries. Ensure correct polarity when inserting batteries. Remove batteries if the unit is not used for a long period. Dispose of used batteries responsibly.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Earphone Use: Avoid listening at high volume levels for extended periods to prevent hearing damage.

3. Package Contents

Please check the package contents carefully. If any item is missing or damaged, contact your retailer immediately.

• Sangean Portable AM/FM Analog Pocket Radio
• Carry Strap
• User Manual (this document)

4. Product Overview (Controls and Features)

Familiarize yourself with the various parts and controls of your Sangean radio.

Figure 1: Front view of the Sangean Portable AM/FM Analog Pocket Radio. Shows the speaker grille, tuning dial, and controls.

1. Tuning Dial: Used to select AM or FM radio frequencies.
2. Volume Control: Adjusts the audio output level.
3. Band Selector Switch: Switches between AM and FM bands.
4. LED Tuning Indicator: Illuminates when a station is tuned in clearly.
5. Built-in Speaker: Provides audio output for listening without earphones.
6. Earphone Jack (3.5mm): For private listening with headphones (not included).
7. Telescopic Antenna: Extendable antenna for FM reception.
8. Battery Compartment: Located on the back, holds batteries (not included).
9. Carry Strap Attachment Point: For attaching the included carry strap.

5. Setup

5.1 Installing Batteries

The Sangean Portable AM/FM Analog Pocket Radio operates on batteries (not included). For optimal performance, use high-quality alkaline batteries.

1. Locate the battery compartment cover on the back of the radio.
2. Slide or unclip the cover to open the compartment.
3. Insert the required number of batteries (e.g., 2 x AA batteries, check compartment for specific type) according to the polarity indicators (+ and -) inside the compartment.
4. Replace the battery compartment cover, ensuring it clicks securely into place.

5.2 Attaching the Carry Strap

The included carry strap provides convenience and security for your radio.

1. Thread the thin loop end of the carry strap through the attachment point on the radio.
2. Pass the main strap through the loop and pull gently to secure it.

6. Operating Instructions

6.1 Turning On/Off and Volume Control

1. To turn on the radio, rotate the Volume Control knob clockwise until you hear a click and the radio powers on.
2. Continue rotating the Volume Control knob to adjust the listening volume.
3. To turn off the radio, rotate the Volume Control knob counter-clockwise until you hear a click and the radio powers off.

6.2 Tuning AM/FM Stations

1. Select the desired band (AM or FM) using the Band Selector Switch.
2. For FM reception, extend the Telescopic Antenna fully for best signal. For AM reception, the radio uses a built-in ferrite bar antenna, so adjust the radio's orientation for optimal signal.
3. Slowly rotate the Tuning Dial to scan for stations.
4. The LED Tuning Indicator will illuminate when you have tuned into a strong and clear station.
5. Fine-tune the dial slightly for the clearest reception.

6.3 Using the Earphone Jack

For private listening, you can connect standard 3.5mm stereo earphones (not included) to the Earphone Jack. When earphones are connected, the built-in speaker will automatically mute.

7. Maintenance

7.1 Cleaning

• Always turn off the radio before cleaning.
• Use a soft, dry cloth to wipe the exterior of the radio.
• Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.

7.2 Battery Care

• If the radio will not be used for an extended period (e.g., more than a month), remove the batteries to prevent leakage and potential damage to the unit.
• Replace batteries when the sound becomes weak or distorted, or the LED tuning indicator no longer illuminates brightly.
• Dispose of used batteries according to local regulations.

7.3 Storage

Store the radio in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

9. Specifications

Note: Specifications are subject to change without notice.

10. Warranty and Support

Sangean products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Sangean website. Keep your purchase receipt as proof of purchase.

For technical support, troubleshooting assistance, or service inquiries, please contact Sangean customer service through their official website or the contact information provided in your warranty documentation.

Sangean Official Website: www.sangean.com