1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your IMPORX Autotracking 20X PTZ IP Camera. This high-performance outdoor surveillance camera features 1080P resolution, 20X optical zoom, auto-tracking, motion detection, and 500ft IR night vision, designed for reliable outdoor security monitoring.
Figure 1: IMPORX Autotracking 20X PTZ IP Camera
2. Safety Information
Please read all safety instructions carefully before installation and operation. Keep this manual for future reference.
- Ensure the camera is powered off before performing any maintenance or installation.
- Installation should be performed by qualified personnel in accordance with local electrical codes.
- Do not expose the camera to extreme temperatures outside its operating range (-22°F to 149°F / -30°C to 65°C).
- Protect cables from damage and ensure proper waterproofing for outdoor installations.
- The camera performs a self-inspection upon power-up. This is normal operation.
3. Package Contents
Verify that all items are present in the package:
- IMPORX Autotracking 20X PTZ IP Camera
- Mounting Bracket
- Power Adapter (if not using Power over Ethernet)
- Installation Screws and Anchors
- Waterproof Connector Kit
- Quick Start Guide / CD with Software
4. Product Features
- Resolution: Full HD 1080P (1920x1080) with 1/2.8" SONY CMOS Sensor.
- Optical Zoom: 20X optical zoom (3.5-126mm lens) for detailed viewing up to 3280ft.
- Night Vision: Infrared (IR) night vision up to 500ft.
- PTZ Functionality: 360° pan, 90° tilt with high-speed movement (Pan: 0.01°~360°/s, Tilt: 0.01°~120°/s).
- Auto-Tracking: Automatically tracks moving objects or people within the camera's view.
- Motion Detection: Configurable motion detection with alerts, capture, storage, and email notifications.
- Environmental Adaptability: Built-in auto-heater and fan for operation in temperatures from -22°F to 149°F.
- Wiper Function: Integrated wiper for clearing dust or rain from the lens.
- Storage: Supports 4-64GB SD card for local recording.
- Connectivity: Supports ONVIF 2.4 protocol for integration with various NVRs and third-party software (e.g., Blue Iris, Milestone).
- Remote Access: P2P viewing via Android/iOS app (Smartviewer - nvr monitor / Videolink) and PC browser/software (iVMS-4200).
5. Setup and Installation
5.1 Physical Installation
Choose a suitable outdoor location for mounting the camera, ensuring a clear field of view and access to power/network connections. The camera is designed for wall or ceiling mounting using the provided bracket.
Figure 2: Camera with Mounting Bracket
- Mark drilling points using the mounting bracket as a template.
- Drill holes and insert wall anchors if necessary.
- Secure the mounting bracket to the surface.
- Attach the camera to the bracket.
- Ensure all connections (power, Ethernet) are properly sealed with the waterproof kit for outdoor use.
Figure 3: Camera Dimensions
5.2 Network Connection
The camera supports wired Ethernet connection, often via Power over Ethernet (PoE) for simplified wiring. If PoE is not used, a separate 12V power adapter is required.
- Connect an Ethernet cable from your network switch/router to the camera's Ethernet port.
- If using PoE, ensure your switch or injector provides PoE power.
- If not using PoE, connect the 12V power adapter to the camera and a power outlet.
5.3 Initial Configuration
After connecting the camera to your network, you will need to discover its IP address and configure it using the provided software or a web browser.
- Install the iVMS-4200 software from the provided CD or download it from the IMPORX website.
- Use the software to scan for devices on your network and find the camera's IP address.
- Access the camera's web interface by entering its IP address into a web browser.
- Log in using the default credentials (refer to the Quick Start Guide for default username/password).
- Change the default password immediately for security.
- Configure network settings, date/time, and video parameters as needed.
Figure 4: ONVIF Configuration Interface
6. Operating Instructions
6.1 Remote Viewing and Control
Access your camera remotely using the dedicated mobile application or PC software.
- Mobile App: Download "Smartviewer - nvr monitor" or "Videolink" from your app store.Download AC18Pro App (Note: This link was extracted from an image, verify if it's the correct app for this model).Download Videolink App
- PC Software: Use iVMS-4200 for comprehensive management.
Figure 5: Remote View via Mobile App
Figure 6: Download Videolink App via QR Code
6.2 PTZ Control
The camera offers full Pan, Tilt, and Zoom capabilities. Use the controls within the mobile app or PC software to adjust the camera's view.
- Pan: Rotate the camera horizontally (360°).
- Tilt: Adjust the camera vertically (90°).
- Zoom: Use the 20X optical zoom to magnify distant objects.
- Presets: Configure up to 256 preset positions for quick navigation to specific areas.
- Patrol Routes: Set up to 8 patrol routes for automated scanning of multiple preset positions.
Video 1: Demonstrates the zoom capabilities of the IMPORX tracking camera.
6.3 Auto-Tracking and Motion Detection
The camera can automatically track moving subjects and trigger alerts based on detected motion.
Figure 7: Smart Tracking Functionality
- Auto-Tracking: When enabled, the camera will automatically follow moving objects or individuals within its field of view.
- Humanoid Recognition: The camera can detect human shapes and prioritize tracking them.
- Motion Detection: Define specific areas for motion detection. When motion is detected, the camera can:
- Capture images or record video.
- Send email alerts.
- Trigger app push notifications.
- Activate a voice alarm (if connected).
Figure 8: Motion Detection & Alarm Linkage
Figure 9: Motion Detection with Voice Alarm
6.4 Night Vision
The camera automatically switches to IR night vision in low-light conditions, providing clear black and white images up to 500ft.
6.5 SD Card Recording
Insert a compatible SD card (4-64GB) into the camera's card slot for local storage of recordings and snapshots. Configure recording schedules and motion-triggered recording via the web interface or software.
7. Maintenance
7.1 Wiper Function
The integrated wiper helps maintain clear vision by removing dust and rain from the lens. Activate the wiper via the camera's OSD menu or software controls.
Figure 10: Wiper Function Effectiveness
7.2 Auto-Heater and Fan
The camera is equipped with an internal auto-heater and fan to regulate its operating temperature, ensuring reliable performance in extreme weather conditions (-22°F to 149°F).
Figure 11: Auto-Heating in Cold Environments
Figure 12: Automatic Cooling Fan
7.3 General Care
- Periodically check the camera's mounting for stability.
- Ensure all cable connections remain secure and waterproof.
- Clean the camera's exterior with a soft, damp cloth. Avoid harsh chemicals.
- Regularly check for firmware updates on the IMPORX website to ensure optimal performance and security.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image/video feed. | Power issue, network connectivity, incorrect IP address. | Check power supply. Verify Ethernet cable connection. Use SADPTool or iVMS-4200 to find the camera's IP address. Ensure firewall settings allow camera traffic. |
| Auto-tracking not working effectively. | Environmental factors (e.g., swaying trees), sensitivity settings, object speed. | Adjust tracking sensitivity in camera settings. Ensure the tracking area is clear of irrelevant moving objects. Consider fixed cameras for specific zones if auto-tracking is inconsistent. |
| Poor image quality at night. | IR obstruction, dirty lens, insufficient IR range for distance. | Clean the lens using the wiper function or a soft cloth. Ensure no objects are blocking the IR illuminators. Verify the object is within the 500ft IR range. |
| Cannot access camera remotely. | Network configuration, P2P service issues, incorrect app settings. | Ensure the camera has internet access. Verify P2P is enabled and correctly configured. Check router firewall and port forwarding settings if not using P2P. Confirm correct app login details. |
| SD card not recording. | Card full, corrupted, incorrect format, recording schedule. | Check SD card status in camera settings. Format the SD card (this will erase data). Ensure recording schedules are active and motion detection is configured if using event-based recording. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | LYSB016KF1BRY-ELECTRNCS |
| Resolution | 1080P (1920x1080), 8MP Effective Still Resolution |
| Sensor | 1/2.8" SONY CMOS Sensor |
| Optical Zoom | 20X (3.5-126mm Lens) |
| IR Night Vision | Up to 500ft |
| Pan Speed | 0.01° ~ 360°/s |
| Tilt Speed | 0.01° ~ 120°/s |
| Operating Temperature | -22°F ~ 149°F (-30°C ~ 65°C) |
| Ingress Protection | IP66 (Weatherproof) |
| Storage | Supports 4-64GB SD Card |
| Connectivity | Wired Ethernet, ONVIF 2.4 |
| Power Source | 12V DC / Power over Ethernet (PoE) |
| Dimensions (L x W x H) | 8 x 8 x 12 inches |
| Item Weight | 8 pounds |
10. Warranty and Support
IMPORX provides technical support for its products. For assistance with configuration, troubleshooting, or any other inquiries, please contact:
- Email: imporx@qq.com
- Skype: IMPORX-Kyla
Please have your model number (LYSB016KF1BRY-ELECTRNCS) and purchase information ready when contacting support.
