1. Introduction
Thank you for choosing the GLW 30W RGB Flood Light. This versatile lighting solution is designed to enhance any environment, offering a wide spectrum of colors and dynamic modes. Its robust, waterproof design makes it suitable for both indoor and outdoor applications, providing reliable and vibrant illumination. This manual will guide you through the setup, operation, and maintenance of your new flood light.
2. Product Features
- Variety of Colors: Offers 16 different colors to meet diverse atmospheric demands. Dimmable RGB LED bulb controlled by remote, allowing brightness adjustment.
- Memory Function: The light will retain your last setting when turned on again.
- Waterproof (IP65): Designed for outdoor normal lighting, advertising, building decoration, and beautification of homes, hotels, gardens, landscapes, and lawns.
- Durable Construction: Features a high-quality aluminum shell for better heat dissipation, ensuring a secure and durable product with prolonged service life.
- Easy Installation: Simple to install and can be mounted or hung anywhere as desired. Comes with a US 3-pin plug, instruction manual, and remote control (with battery).
3. What's in the Box
- GLW 30W RGB Flood Light
- Remote Control
- User Manual
4. Setup
Safety Precautions:
- Ensure the power is off before installation or maintenance.
- Do not look directly into the light when it is on, as it can be extremely bright.
- Install on a stable surface or mounting point.
Mounting Instructions:
The GLW Flood Light comes with an adjustable mounting bracket for flexible positioning. You can:
- Surface Mount: Use the pre-drilled holes on the bracket to secure the light to a wall, ceiling, or other flat surface using appropriate screws (not included).
- Floor Stand: The adjustable bracket also functions as a stand, allowing you to place the light directly on the ground and angle it as needed.
Adjustable mounting bracket for versatile placement.
Power Connection:
Simply plug the US 3-pin plug into a standard 110V power outlet. Ensure the connection is secure, especially for outdoor use where a waterproof outlet cover is recommended.
GLW 30W RGB Flood Light ready for use.
5. Operating Instructions
Remote Control Overview:
The GLW Flood Light is operated using the included IR remote control. Ensure the remote has a clear line of sight to the light's sensor for optimal performance.
Remote control layout.
Functions:
- ON/OFF: Press the ON button to turn the light on, and OFF to turn it off.
- Brightness Adjustment: Use the Sun Up and Sun Down buttons to increase or decrease the light intensity.
- Color Selection: Choose from 16 static colors by pressing the corresponding color buttons on the remote.
- Dynamic Modes: The remote offers 4 dynamic lighting modes:
- Flash: Rapidly cycles through all 16 colors.
- Strobe: Cycles through colors with a slower, pulsating effect.
- Fade: Smoothly transitions between colors.
- Smooth: A slower, more gradual transition between colors than Fade.
Visual representation of 16 colors and 4 modes.
Memory Function:
The flood light is equipped with a memory function. When you turn the light off and then back on, it will automatically resume the last color or mode setting that was active.
Example of the flood light in an outdoor setting.
6. Maintenance
- Cleaning: To clean the light, wipe it with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they may damage the finish or internal components.
- Heat Dissipation: The light features an aluminum heat sink designed for efficient heat dissipation. Ensure the fins are not obstructed to maintain optimal performance and prolong the lifespan of the LED.
- Storage: If storing the light for an extended period, ensure it is clean, dry, and stored in a cool, well-ventilated area.
Aluminum heat sink for efficient cooling.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, remote battery dead. | Check power outlet, ensure plug is secure, replace remote battery. |
| Remote not responding. | Remote battery dead, obstruction between remote and sensor, remote too far. | Replace remote battery, remove obstructions, move closer to the light. |
| Incorrect color displayed. | Remote signal interference, internal fault. | Try resetting the light by unplugging and replugging. If issue persists, contact support. |
| Light flickers or dims unexpectedly. | Unstable power supply, overheating. | Ensure stable power source. Check for proper ventilation around the heat sink. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | GLW |
| Model Number | FMW-R014FL-30W |
| Color | 30W(R G B) / Multicolor |
| Material | Metal, Glass |
| Style | Modern |
| Product Dimensions | 7.2"L x 3.94"W x 8.82"H |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Special Feature | Color Changing, Dimmable |
| Control Method | Remote Control |
| Light Source Type | LED |
| Voltage | 110 Volts |
| Wattage | 30 Watts |
| Water Resistance Level | IP65 Waterproof |
| Item Weight | 1.4 Pounds |
Detailed dimensions of the flood light.
IP65 waterproof rating ensures durability in various weather conditions.
9. Warranty & Support
The GLW 30W RGB Flood Light comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable performance under normal use.
For any questions, technical support, or warranty claims, please contact GLW customer service. Our dedicated support team is available 24/7 to assist you.
Contact Information: Please refer to the contact details provided on the product packaging or the official GLW website for the most up-to-date support options.