ECO-WORTHY 24V Submersible Deep Well Water Pump User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your ECO-WORTHY 24V Submersible Deep Well Water Pump. Please read this manual thoroughly before using the product and retain it for future reference.

The ECO-WORTHY 24V Submersible Deep Well Water Pump is designed for various applications, including deep well water supply, livestock watering, irrigation, and general water transfer. It features a DC motor, allowing direct connection to solar panels or 24V battery systems.

Image: The ECO-WORTHY 24V Submersible Deep Well Water Pump, an orange cylindrical pump with a black power cable and a stainless steel filter at the top.

2. Product Specifications

Image: The ECO-WORTHY 24V Submersible Water Pump, highlighting its 24V DC voltage, 1.6 GPM max flow, 30m (100ft) max head, and 96W power. It also notes its DC motor, large flow, and assurance features.

Image: A hand holding the ECO-WORTHY submersible pump, illustrating its compact design. Dimensions are shown as 104mm width and 329mm height. An inset shows the 3m cable and the 12.7mm outlet diameter.

3. Safety Information

WARNING: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or death.

• Always disconnect power before installing, servicing, or performing any maintenance on the pump.
• Ensure all electrical connections are properly insulated and protected from water. Use waterproof connectors where necessary.
• Do not operate the pump dry. Ensure the pump is fully submerged in water before connecting power.
• Do not use the power cable to lift or lower the pump. Always use a rope or chain attached to the designated lifting points on the pump.
• Verify that the power source (solar panel or battery) matches the pump's voltage requirements (24V DC).
• Keep children and unauthorized personnel away from the pump and its power source during operation.
• If the pump shows signs of damage, do not operate it. Contact customer support.

4. Setup and Installation

4.1 Unpacking

Carefully remove the pump from its packaging. Inspect for any visible damage. Retain packaging for potential returns or storage.

4.2 Connection to Power Source

The pump is designed for 24V DC power. It can be connected directly to a 200W or higher solar panel, or to a 24V battery system. A solar charge controller is recommended when connecting to solar panels with a battery bank to protect the battery from overcharging and the pump from voltage fluctuations.

• Connect the positive (+) wire of the pump (typically red or marked) to the positive terminal of your 24V power source.
• Connect the negative (-) wire of the pump (typically black or marked) to the negative terminal of your 24V power source.
• Ensure all connections are secure and properly insulated to prevent short circuits and corrosion.

Image: Detailed view of the pump components, including the water outlet, the stainless steel filter at the intake, and the copper core cable for power connection.

4.3 Water Outlet Connection

Connect a suitable hose or pipe to the pump's water outlet. Ensure the connection is tight and leak-free. The outlet diameter is 12.7mm.

4.4 Lowering the Pump

The pump is suitable for wells 4-1/8 inches or larger. Attach a strong rope or chain to the designated lifting points on the pump's top housing. Do not use the electrical cable to lift or lower the pump. Slowly lower the pump into the well or water source, ensuring it remains fully submerged during operation. The pump has a maximum lift of 230 feet (70 meters).

Image: A close-up view of the top section of the ECO-WORTHY submersible pump, showing the white barbed water outlet and the two holes on the orange housing designed for attaching a rope or chain for lowering and retrieval.

5. Operation

5.1 Initial Start-up

Once the pump is fully submerged and all connections are secure, apply 24V DC power. The pump should begin operating, drawing water and discharging it through the connected hose.

5.2 Continuous Operation

The pump is designed for continuous operation as long as it is submerged and receiving adequate power. Monitor the water level to prevent dry running, which can damage the pump.

5.3 Understanding Lift and Flow

The actual water flow rate and lift height depend on various factors, including the depth of the pump, horizontal transportation distance, and the height to the final water tank. Refer to the provided formula and graph for guidance.

Image: A diagram illustrating how to calculate the total lift for the pump. It shows a well (h1: pump to ground), ground transportation distance (h2), and height to a water tank (h3). The formula provided is "Head > h1 + h2/10 + h3", indicating that actual lift varies due to objective factors.

Image: A performance graph showing the relationship between pump head (in meters) and traffic (flow rate in gallons per hour). Different shaded areas indicate varying performance levels, with higher head resulting in lower flow.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pump.

• Filter Cleaning: Periodically inspect the stainless steel filter at the pump's intake. Clean any debris or sediment that may obstruct water flow.
• Cable Inspection: Regularly check the power cable for any signs of wear, cuts, or damage. Replace if necessary.
• Submersion: Always ensure the pump remains fully submerged during operation to prevent overheating and dry running.
• Winterization: In freezing climates, remove the pump from the water source before temperatures drop below freezing. Drain all water from the pump and store it in a dry, frost-free location.

7. Troubleshooting

8. Warranty and Support

ECO-WORTHY products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ECO-WORTHY website.

You can also contact ECO-WORTHY customer service through their official channels for assistance with product setup, troubleshooting, or parts replacement.

Visit the ECO-WORTHY Store on Amazon