Hobart AM15-2 AM Select Dishwasher Hi Temp with Booster User Manual

Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Hobart AM15-2 AM Select Dishwasher Hi Temp with Booster. Please read this manual thoroughly before operating the appliance and retain it for future reference.

The Hobart AM15-2 is a high-temperature commercial dishwasher designed for heavy-duty use, capable of washing 58 racks per hour. It features solid-state integrated controls, a self-draining high-efficiency stainless steel pump, and hot water sanitation without the need for chemicals. This model is NSF, UL, and Energy Star Rated.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury to persons.

• Read all instructions before using the dishwasher.
• Connect to a properly grounded outlet only.
• Do not operate a damaged appliance. Contact qualified service personnel.
• Keep children away from the dishwasher.
• Use only detergents and rinse aids recommended for commercial dishwashers.
• Ensure proper ventilation as specified in installation instructions.
• Disconnect power before servicing or cleaning.

Setup and Installation

The Hobart AM15-2 is designed for built-in installation. Professional installation is highly recommended to ensure proper operation and compliance with local codes.

Unpacking

Carefully remove all packaging materials. Inspect the dishwasher for any shipping damage. Report any damage immediately to the carrier and your dealer.

Location Requirements

• Ensure adequate space for the unit. Overall dimensions are approximately 27 inches W x 28.5 inches D x 66.5 inches H.
• The installation area must be level and capable of supporting the weight of the dishwasher when full.
• Provide access to electrical, water, and drain connections.

Electrical Connection

This unit requires a 208-240/60/3 electrical supply. Connection must be performed by a qualified electrician in accordance with all local and national electrical codes.

Water and Drain Connections

Connect to appropriate hot water supply and drainage systems. Ensure all connections are secure and leak-free. The unit features auto-fill and auto-drain closure.

Figure 1: Front view of the Hobart AM15-2 AM Select Dishwasher. This image shows the stainless steel exterior and general form factor of the commercial dishwasher.

Operating Instructions

Control Panel Overview

The dishwasher is equipped with solid-state integrated controls and digital status indicators. Refer to the specific control panel diagram (not provided in this manual) for detailed button functions.

Loading the Dishwasher

• Scrape off large food particles from dishes before loading.
• Load racks to allow maximum water circulation. Do not overload.
• Ensure items do not obstruct the revolving interchangeable upper and lower anti-clogging wash arms.

Starting a Wash Cycle

1. Close the chamber door. The unit features a door-actuated start.
2. Select the desired wash cycle (3 option cycles available).
3. Press the START button. Digital status indicators will show the cycle progress.

Delime Cycle

The unit includes a delime cycle for descaling. Follow the instructions on the control panel for initiating and completing this cycle. Use only recommended deliming agents.

Vent Fan Control

The integrated vent fan control helps manage steam and heat during operation. Consult the control panel for specific settings and operation.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Hobart AM15-2 dishwasher.

Daily Cleaning

• Empty and clean the scrap screens.
• Wipe down all stainless steel surfaces with a damp cloth and mild detergent.
• Ensure the self-draining pump and impeller area is clear of debris.

Weekly / Bi-Weekly Cleaning

• Perform the delime cycle as needed, depending on water hardness.
• Inspect wash arms and lower rinse arms for blockages and clean if necessary.
• Check and clean the tank, tank shelf, and chamber.

Service Diagnostics

The unit is equipped with service diagnostics to assist qualified technicians in identifying and resolving issues. Do not attempt to perform complex repairs yourself. Contact authorized Hobart service personnel.

Troubleshooting

This section provides solutions to common operational issues. For problems not listed here, or if issues persist, contact authorized service personnel.

Specifications

Warranty and Support

Specific warranty details for the Hobart AM15-2 are typically provided at the point of purchase or can be found on the official Hobart website. Please retain your proof of purchase for warranty claims.

For technical support, service requests, or to locate an authorized service provider, please visit the official Hobart website or contact their customer service department directly. When contacting support, please have your model number (AM15-2) and serial number ready.