Introduction
The Nilfisk ATTIX 30-01 PC is a powerful yet compact wet/dry vacuum cleaner designed for mobile professional use. Its ergonomic design and low operating noise make it suitable for various cleaning tasks. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your vacuum cleaner.
Key features include a washable non-woven PET filter and the semi-automatic Push&Clean filter cleaning system, which minimizes work interruptions, maintains high suction power, and reduces maintenance costs.
Safety Information
Always read and understand all safety warnings and instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Ensure the power supply matches the voltage specified on the vacuum cleaner's rating plate.
- Do not use the vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Always unplug the vacuum cleaner from the electrical outlet before performing any adjustments, changing accessories, or storing the appliance.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Product Overview
The Nilfisk ATTIX 30-01 PC is equipped with features designed for efficiency and convenience.
- Push&Clean Filter Cleaning System: Semi-automatic filter cleaning for sustained suction power.
- 30 Liter Container Volume: Generous capacity for extended cleaning tasks.
- Multifunction Accessory System: Integrated storage and versatile attachments.
- Cable Holder: Convenient storage for the power cable.
- PET Filter Element: Durable and washable non-woven filter.
- Suction Power Regulation: Adjustable power directly on the hand tube.
Figure 1: Top view of the Nilfisk ATTIX 30-01 PC showing the integrated tool storage compartment. This compartment provides convenient access and organization for various accessories and small tools.
Figure 2: Underside view of the Nilfisk ATTIX 30-01 PC demonstrating the filter assembly. The washable PET filter is crucial for maintaining suction efficiency and can be easily accessed for cleaning or replacement.
Setup
- Unpacking: Carefully remove all components from the packaging. Check for any damage during transit.
- Filter Installation: Ensure the PET filter is correctly installed in its housing. For dry vacuuming, the filter must be clean and dry. For wet vacuuming, the filter can remain in place, but ensure it is suitable for wet use.
- Hose Connection: Connect the suction hose securely to the inlet port on the vacuum cleaner.
- Accessory Attachment: Attach the desired nozzle or accessory to the end of the suction hose or extension tubes.
- Power Connection: Plug the power cable into a suitable grounded electrical outlet. Ensure the cable is not a tripping hazard.
Operating Instructions
General Operation
- Power On: Turn the vacuum cleaner on using the power switch.
- Suction Power Adjustment: If your model features suction power regulation on the hand tube, adjust it as needed for the task.
- Dry Vacuuming: Use the appropriate nozzle for dry debris. Ensure the filter is clean and dry.
- Wet Vacuuming: For liquid pickup, ensure the container is empty and the filter is suitable for wet use. The vacuum will automatically shut off when the maximum liquid level is reached.
- Power Off: After use, turn off the vacuum cleaner and unplug it from the power outlet.
Push&Clean Filter Cleaning System
To maintain optimal suction performance, regularly use the Push&Clean system:
- While the vacuum is running, block the hose inlet with your hand or a suitable cap.
- Press and hold the Push&Clean button for approximately 3-5 seconds.
- Release the button. The system will vibrate the filter, dislodging dust and debris.
- Repeat this process several times until suction power is restored.
Figure 3: The Nilfisk ATTIX 30-01 PC in use on a construction site, demonstrating its capability for heavy-duty cleanup of debris and dust from surfaces like walls and floors.
Figure 4: An operator using the Nilfisk ATTIX 30-01 PC for dust extraction during car body sanding. The vacuum effectively captures fine dust, ensuring a cleaner work environment and better finish.
Figure 5: The Nilfisk ATTIX 30-01 PC connected to a wall sander, illustrating its use for efficient dust removal during interior renovation work. This setup helps maintain air quality and reduces cleanup time.
Maintenance
Filter Cleaning and Replacement
- The PET filter is washable. Remove the filter and rinse it under running water. Allow it to dry completely before reinstallation.
- Regularly check the filter for damage. Replace the filter if it is torn or heavily clogged and cannot be cleaned effectively.
Container Emptying
- Dry Debris: Unlatch the motor head and carefully lift it off. Empty the collected dry debris from the container.
- Liquids: For wet vacuuming, the container can be emptied by tilting the unit or by removing the motor head and pouring out the liquid.
- Clean the inside of the container periodically to prevent odor and buildup.
General Cleaning
- Wipe the exterior of the vacuum cleaner with a damp cloth. Do not use harsh cleaning agents or solvents.
- Inspect the hose and accessories for blockages or damage. Clear any obstructions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not start | No power supply; Power switch off; Damaged power cable. | Check power plug and outlet; Turn power switch on; Inspect power cable for damage and replace if necessary. |
| Low suction power | Clogged filter; Full container; Blocked hose/nozzle; Leaks in hose/connections. | Clean or replace filter; Empty container; Clear blockages; Check all connections for tightness. Use Push&Clean system. |
| Motor stops during wet vacuuming | Container is full (float switch activated). | Empty the container. |
| Unusual noise | Foreign object in fan; Motor issue. | Turn off and unplug. Inspect for foreign objects. If noise persists, contact service. |
Specifications
| Brand | Nilfisk |
| Model Number | 107413591 |
| Color | Blue |
| Dimensions (L x W x H) | 45 x 38 x 59.5 cm |
| Weight | 14.26 kg |
| Capacity | 30 Liters |
| Power | 1500 Watts |
| Voltage | 230 Volts |
| Noise Level | 59 Decibels |
| Special Feature | Bagless |
| Filter Type | Non-woven PET filter |
| Surface Recommendation | Hard floor |
| Power Source | Electric |
| Included Components | Side brushes, cleaning tool, dust brush |
Warranty and Support
For warranty information, technical support, or to order replacement parts, please contact Nilfisk customer service or visit the official Nilfisk website. Keep your purchase receipt as proof of purchase for warranty claims.
Please refer to the official Nilfisk documentation or website for the most up-to-date warranty terms and conditions applicable to your region.





