1. Product Overview
A 12-ounce aerosol can of Krylon COVERMAXX spray paint in Gloss Cherry Red. The label highlights features such as 'Ultimate Coverage', 'Rust Protection', 'Paint + Primer', 'Durable Adhesion', and 'Fastest Dry Time'. It also indicates 'Indoor Outdoor' use and an 'Easy Push Spray Tip' for metal, wood, plastic, and more.
Product Description
Krylon COVERMAXX Spray Paint provides premium coverage and superior color. It offers ultimate coverage for various surfaces including metal, wood, and plastic. This product is formulated for excellent adhesion and durability, suitable for both indoor and outdoor applications.
Key Features
- Rust protection
- Paint + primer formula
- 10 minute or less dry time to touch
- Suitable for indoor/outdoor use
- Features a conical easy push spray tip for comfortable application
2. Safety Information
General Warnings
DANGER! EXTREMELY FLAMMABLE - VAPORS MAY CAUSE FLASH FIRES! CONTENTS UNDER PRESSURE. VAPOR HARMFUL. Read all cautions on the product label and back panel before use.
Precautions
- Use in a well-ventilated area. Ensure fresh air entry during application and drying.
- Wear appropriate personal protective equipment, including eye protection (safety glasses) and gloves, to prevent contact with skin and eyes.
- Keep away from heat, sparks, open flames, and other ignition sources. Do not smoke while using this product.
- Do not puncture, incinerate, or expose the can to temperatures above 120°F (49°C).
- Keep out of reach of children and pets.
- If swallowed, do NOT induce vomiting. Call a poison control center or physician immediately.
- In case of eye contact, flush thoroughly with water for 15 minutes and seek medical attention.
- In case of skin contact, wash thoroughly with soap and water.
3. Preparation
Surface Preparation
Proper surface preparation is essential for optimal adhesion and finish quality.
- Clean: Ensure the surface is clean, dry, and free of grease, oil, wax, rust, and loose paint.
- Sand: Lightly sand glossy surfaces or bare wood/metal for better adhesion.
- Remove Dust: Wipe away all sanding dust with a tack cloth or damp cloth and allow to dry completely.
- Mask: Use painter's tape and drop cloths to protect surrounding areas not intended for painting.
Can Preparation
- Shake: Shake the can vigorously for at least one minute after the mixing ball begins to rattle.
- During Use: Continue to shake the can occasionally during application to ensure proper paint consistency.
4. Application Instructions
Spraying Technique
- Test Spray: Before applying to your project, test spray on an inconspicuous area or scrap material to check color and spray pattern.
- Distance: Hold the can upright approximately 10-12 inches from the surface.
- Application: Apply paint with steady, even strokes, moving the can from side to side.
- Coats: Apply multiple thin coats rather than one heavy coat to prevent drips and ensure even coverage.
- Overlap: Slightly overlap each stroke for a uniform finish.
Drying Times
- Touch Dry: Dries to touch in 10 minutes or less.
- Handle: Can be handled after 1 hour.
- Full Cure: Allow 24 hours for full cure.
- Recoat Window: Recoat within 1 hour or after 24 hours. Applying additional coats between 1 and 24 hours may cause wrinkling.
5. Maintenance and Storage
After Use
- Clear Valve: To prevent clogging, invert the can and spray until only clear gas appears.
- Clean Tip: Wipe the spray tip clean with a cloth.
Storage
Store the can in a cool, dry place away from direct sunlight, heat, sparks, and open flame. Do not store at temperatures above 120°F (49°C). Ensure the cap is securely placed on the can.
6. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Uneven Spray Pattern | Clogged nozzle, inconsistent spray distance | Clean nozzle by inverting can and spraying. Maintain consistent distance from surface. |
| Drips or Runs | Too much paint applied, can held too close | Apply thinner coats. Increase distance from surface to 10-12 inches. |
| Poor Adhesion | Improper surface preparation (dirty, greasy, unsanded) | Ensure surface is thoroughly clean, dry, and properly sanded before application. |
| Slow Drying Time | High humidity, low temperature, thick coats | Ensure adequate ventilation. Apply thin coats. Allow sufficient drying time in optimal conditions. |
7. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Krylon |
| Model Number | K09112000 |
| Color | Gloss Cherry Red |
| Finish Type | Semi-Gloss |
| Size | 12 Ounce (Pack of 1) |
| Item Volume | 12 Fluid Ounces |
| Special Feature | Rust Resistant |
| Paint Type | Spray |
| Specific Uses | Interior/Exterior |
| Surface Recommendation | Wood, Plastic, Metal |
| Coverage | Approximately 25 SQ FT |
| Item Weight | 15.2 ounces |
| Product Dimensions | 2.61 x 2.61 x 7.96 inches |
| UPC | 724504091127 |
8. Warranty and Support
Manufacturer's Warranty
This Krylon product is covered by a manufacturer's warranty. For specific details regarding coverage, duration, and terms, please refer to the information provided on the product packaging or visit the official Krylon website. Keep your purchase receipt as proof of purchase.
Customer Support
For further assistance, technical questions, or product inquiries, please visit the official Krylon website or contact their customer support department directly.
Official Website: www.krylon.com