1. Introduction
The PHILIPS Phillips Ind. 17-420 16" Tender Spring Assembly is designed to provide effective management and protection for automotive cables and hoses. This assembly helps to prevent tangling, chafing, and damage to critical lines, ensuring their longevity and reliable operation. It is particularly useful in applications where hoses or cables require flexible support and organization, such as with hydraulic lines or electrical wiring in heavy-duty vehicles or equipment.
2. Product Components
The 17-420 Tender Spring Assembly kit includes the following components:
- Two (2) 16-inch Springs: These springs provide the primary support and flexibility for hose and cable management.
- Two (2) PVC Sleeves: Durable PVC sleeves are included to protect the springs and the hoses/cables from abrasion and environmental elements.
- One (1) 17-153 QWIK-SNAP: A quick-release mechanism designed for easy attachment and detachment.
- Snap-on Clip: For secure fastening of the assembly.
- 3-Hose Holder: A component designed to organize and secure up to three hoses or cables.
Figure 2.1: Overview of the PHILIPS 17-420 Tender Spring Assembly components, including the spring, PVC sleeve, and QWIK-SNAP.
3. Installation Guide (Setup)
Proper installation of the Tender Spring Assembly is crucial for optimal performance and safety. Follow these steps carefully:
- Safety First: Ensure the vehicle or equipment is turned off and secured. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
- Identify Mounting Points: Determine the ideal locations for attaching the spring assembly to effectively manage the hoses or cables. These points should allow for necessary movement without excessive tension or slack.
- Attach QWIK-SNAP: Securely attach the 17-153 QWIK-SNAP to one of the designated mounting points. Ensure it is firmly fastened and will not dislodge during operation.
- Thread Hoses/Cables: Carefully thread the hoses or cables through the PVC sleeves. Ensure the sleeves cover the sections of the hoses/cables that require protection from abrasion or kinking.
- Connect Springs: Attach the springs to the QWIK-SNAP and the other end to a second secure mounting point. The springs should provide gentle tension to keep the hoses/cables organized without restricting their necessary movement.
- Utilize 3-Hose Holder: If managing multiple hoses, use the 3-hose holder to bundle and secure them together within the assembly. This prevents individual hoses from separating or snagging.
- Secure Snap-on Clip: Use the snap-on clip to further secure the assembly or specific hose bundles as needed, ensuring a tidy and stable installation.
- Verify Installation: Once installed, gently move the hoses/cables through their full range of motion to ensure the assembly allows for proper function without binding or excessive strain. Check all connection points for security.
Note: For specific vehicle or equipment applications, consult the manufacturer's service manual for recommended routing and attachment points for hoses and cables.
4. Operation
The PHILIPS 17-420 Tender Spring Assembly operates passively by providing continuous support and organization for automotive hoses and cables. Once installed, it maintains the desired routing and prevents hoses from sagging, dragging, or interfering with moving parts. The springs allow for necessary flexibility during vehicle operation or equipment movement, while the PVC sleeves protect against wear and tear. The QWIK-SNAP feature allows for quick disconnection if maintenance or replacement of the hoses/cables is required.
5. Maintenance
Regular inspection and minor maintenance can extend the life of your Tender Spring Assembly:
- Visual Inspection: Periodically inspect the springs, PVC sleeves, QWIK-SNAP, and hose holder for any signs of wear, cracks, fraying, or damage. Check for corrosion on metal components.
- Cleanliness: Keep the assembly free from excessive dirt, grease, and debris. A simple wipe-down with a damp cloth is usually sufficient. Avoid harsh chemicals that may degrade the PVC material.
- Connection Security: Ensure all attachment points remain secure. Re-tighten or re-fasten any loose connections.
- Hose/Cable Condition: While inspecting the assembly, also check the condition of the hoses and cables it supports for any signs of damage or leaks.
- Replacement: If any component of the assembly shows significant wear or damage, replace the entire assembly to ensure continued protection and performance. Do not attempt to repair damaged springs or sleeves.
6. Troubleshooting
This section addresses common issues you might encounter with the Tender Spring Assembly:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hoses/Cables are sagging or loose. | Springs have lost tension or are stretched; improper initial installation. | Inspect springs for damage. If damaged, replace the assembly. Re-evaluate mounting points for better tension. |
| Hoses/Cables are chafing or showing wear. | PVC sleeves are damaged or not positioned correctly; hoses are rubbing against sharp edges. | Ensure PVC sleeves fully cover vulnerable sections. Check for sharp edges near routing path and address them. Replace assembly if sleeves are compromised. |
| Assembly detaches from mounting point. | QWIK-SNAP or snap-on clip not securely fastened; mounting point is weak or damaged. | Re-secure all connection points. If mounting point is damaged, find an alternative secure location or repair the original. |
7. Specifications
| Attribute | Detail |
|---|---|
| Item Name | Tracker Spring Kit |
| Part Number | 17-420 |
| Brand | PHILIPS (Phillips Ind.) |
| Kit Includes | Snap-on clip, PVC sleeve, spring(s), 3-hose holder |
| Spring Length | 16 inches (each) |
| Material | Polyvinyl Chloride (PVC) for sleeves, Metal for springs/clip |
| Item Weight | 2.27 pounds |
| Package Dimensions | 17.56 x 8.46 x 1.93 inches |
| Model Number | 17-420 |
| Manufacturer | Phillips Ind. |
8. Warranty and Support
8.1 Warranty Information
This PHILIPS product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the packaging or contact PHILIPS customer support.
8.2 Customer Support
For technical assistance, installation questions, or warranty inquiries regarding your PHILIPS Phillips Ind. 17-420 Tender Spring Assembly, please contact PHILIPS customer support. You can typically find contact information on the product packaging or on the official PHILIPS website. When contacting support, please have your product model number (17-420) and purchase details ready.
For more information, visit the official PHILIPS store: PHILIPS Store on Amazon
