SONOROUS ST-160

SONOROUS ST-160 Premium TV Stand Instruction Manual

Model: ST-160

1. Introduction

Thank you for choosing the SONOROUS ST-160 Premium TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new entertainment center. The ST-160 is designed to accommodate televisions up to 75 inches, offering a sleek black glass cover and black wood finish, along with practical storage solutions for your media components.

SONOROUS ST-160 Premium TV Stand in a modern living room setting with a large TV on top.

Image 1.1: The SONOROUS ST-160 TV Stand in a living room environment.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

Safety information: Ensure proper assembly, follow weight limits, and use caution when moving to avoid tip-over or injury.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. The SONOROUS ST-160 TV Stand typically arrives in two packages due to its weight and size.

Expected components include:

If any parts are missing or damaged, please contact SONOROUS customer support immediately.

4. Assembly Instructions

Assembly of the SONOROUS ST-160 TV Stand requires careful attention to detail. It is recommended that two adults perform the assembly due to the weight and size of the components.

  1. Prepare the Area: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture pieces and your floor.
  2. Identify Components: Unpack all boxes and identify each component using the provided parts list (if included separately). Refer to the dimensions diagram for clarity.Diagram showing the dimensions and internal structure of the SONOROUS ST-160 TV stand, including measurements in centimeters and inches.

    Image 4.1: Dimensions and internal layout of the ST-160 TV Stand.

  3. Assemble the Base: Connect the bottom panel to the side panels using the provided hardware. Ensure all connections are secure.
  4. Install Internal Dividers and Shelves: Insert the internal dividers. The shelves are adjustable; choose your desired height and secure them with the shelf pins.Close-up image showing the adjustable shelving feature inside the SONOROUS ST-160 TV stand, with a media device placed on a shelf.

    Image 4.2: Adjustable shelving for flexible storage.

  5. Attach the Top Panel: Carefully align and attach the top panel to the assembled structure. This step often requires two people due to the size and weight of the top panel. Ensure all pegs and holes align perfectly for a flush fit.
  6. Install Doors: Attach the hinges to the frosted glass door panels and then to the main cabinet. Install the push-to-open mechanisms.Close-up image demonstrating the push-to-open door mechanism on the SONOROUS ST-160 TV stand, showing the door slightly ajar.

    Image 4.3: Push-to-open doors for easy access.

  7. Attach Hidden Casters: Secure the hidden casters to the bottom of the stand. These allow for effortless mobility.Close-up image showing the hidden casters on the bottom of the SONOROUS ST-160 TV stand, designed for effortless mobility.

    Image 4.4: Hidden casters for effortless mobility.

  8. Final Check: Ensure all screws are tightened and the stand is stable.

The total weight of the assembled stand is approximately 152 pounds. Exercise caution during and after assembly.

5. Operating Instructions

The SONOROUS ST-160 TV Stand is designed for intuitive use and efficient organization of your entertainment system.

6. Maintenance

Proper care will ensure the longevity and appearance of your SONOROUS ST-160 TV Stand.

7. Troubleshooting

This section addresses common issues you might encounter.

ProblemPossible CauseSolution
Stand is wobbly or unstable.Uneven floor surface; loose hardware.Ensure the stand is on a level surface. Check and tighten all assembly hardware.
Doors do not close or open smoothly.Misaligned hinges; faulty push-to-open mechanism.Adjust hinge screws to align doors. If the push-to-open mechanism is faulty, contact customer support for a replacement.
Remote control signals are not passing through the glass.Device too far back; strong ambient light interference.Ensure devices are positioned close to the front of the cabinet. Reduce direct light on the glass if possible.
Scratches or damage to the finish.Abrasive cleaning materials; sharp objects.Use only soft cloths for cleaning. Avoid dragging objects across the surface. Minor scratches may be repairable with specialized kits (consult manufacturer).

8. Specifications

FeatureDetail
BrandSONOROUS
Model NumberSTD 160-I-BLK
Product Dimensions (L x W x H)65 x 17.7 x 17.3 inches (165 x 45 x 44 cm)
Item Weight152 pounds (68.9 kg)
MaterialWood, Frosted Glass
ColorBlack
Maximum TV Size SupportedUp to 75 inches
Maximum Top Shelf Load Capacity110 lbs (50 kg)
Maximum Stand Load Capacity177 lbs (80 kg)
Special FeatureAdjustable Shelves, Hidden Casters, Push-to-Open Doors, IR-Friendly Glass
Product Care InstructionsWipe with Damp Cloth
UPC638845675857

9. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please contact SONOROUS customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can visit the official SONOROUS store for more information: SONOROUS Store on Amazon.

Related Documents - ST-160

Preview Sonorous LB 2030 Assembly Instructions
Detailed assembly instructions for the Sonorous LB 2030 furniture, including part identification, step-by-step guidance, and warranty information.
Preview Meuble TV SONOROUS PL2400-B-INX pour Écran Plasma/LCD avec Support Pivotant
Découvrez le SONOROUS PL2400-B-INX, un meuble TV élégant et fonctionnel pour écrans Plasma et LCD jusqu'à 42 pouces. Il est doté de profilés en aluminium brossé, d'étagères en verre trempé de 8mm, d'un système pivotant à 35° et d'une gestion des câbles intégrée. Supporte un poids total de 75 kg, avec une capacité de 50 kg pour la fixation de l'écran. Disponible en diverses finitions de verre et de profilés.
Preview St. Mandyu DJ0072 LED TV Stand Assembly Instructions
Comprehensive assembly guide for the St. Mandyu DJ0072 LED TV Stand, detailing parts, tools, and step-by-step instructions for building this modern entertainment center with drawer and integrated LED lighting.
Preview VECELO TV Stand Assembly Instructions
Comprehensive assembly instructions for the VECELO TV Stand, including parts list, tools required, step-by-step assembly guide, return policy, and troubleshooting tips.
Preview Kamaro RTV 160 TV Stand Assembly Instructions
Detailed step-by-step assembly guide for the Kamaro RTV 160 TV stand, including a comprehensive parts list and clear instructions for building your media console.
Preview Latitude Run ST-5010 TV Stand Installation and Assembly Guide
Comprehensive installation and assembly instructions for the Latitude Run ST-5010 TV stand, detailing parts, hardware, and step-by-step assembly procedures for a user-friendly setup.