Swiffer Sweeper Wet Mopping Cloth Multi Surface Refills User Manual

1. Introduction

Swiffer Sweeper Wet mop textured cloths are designed to trap and lock dirt deep within the cloth fibers. These multi-surface refills are safe for use on all finished floors, featuring a scrubbing strip to effectively remove tough spots. Enjoy the fresh Febreze Lavender Scent as you clean your floors.

Note: Do not use on unfinished, oiled or waxed wooden boards, non-sealed tiles, or carpeted floors as these surfaces may be water sensitive.

Figure 1: Swiffer Sweeper Wet Mopping Cloths product packaging.

Product Features:

• Deep Cleaning Action: Textured wet mopping pads trap and lock dirt effectively.
• Tough Spot Fighting: Integrated scrubbing strip helps remove stubborn spots.
• Swiffer Sweeper Compatible: Designed for seamless use with your Swiffer Sweeper device.
• Febreze Lavender Scent: Provides a pleasant, fresh aroma during and after cleaning.

2. Setup and Installation

Attaching the Swiffer Wet Mopping Cloths to your Swiffer Sweeper is a quick and straightforward process.

Figure 2: Visual guide for attaching a wet mopping cloth to the Swiffer Sweeper.

Steps for Attaching a Wet Mopping Cloth:

1. Lay the Swiffer Sweeper cloth flat on the floor with the textured side facing down.
2. Place your Swiffer Sweeper head onto the center of the cloth.
3. Fold the edges of the cloth over the top of the sweeper head.
4. Securely tuck the edges of the cloth into the grippers on the top of the sweeper head. Ensure the cloth is taut and evenly distributed.

3. Operating Instructions

Once the wet mopping cloth is securely attached, your Swiffer Sweeper is ready for use. These cloths are designed for multi-surface cleaning.

Figure 3: Swiffer Sweeper is safe for use on vinyl, hardwood, and tile floors.

General Usage:

• Gently glide the Swiffer Sweeper across your floor surfaces. The textured cloth will trap and lock dirt and grime.
• For tough spots, utilize the scrubbing strip by applying slight pressure and moving the sweeper over the affected area.
• Allow the floor to dry naturally after mopping. No rinsing is required.

Figure 4: Demonstrating the Swiffer Sweeper's ability to cut through tough grime.

4. Maintenance and Disposal

Swiffer Wet Mopping Cloths are designed for single-use convenience. Proper disposal ensures hygiene and environmental responsibility.

Disposal Instructions:

1. After use, detach the soiled cloth from the Swiffer Sweeper head.
2. Dispose of the used cloth in your household waste. Do not flush.
3. Wash hands thoroughly after handling used cloths.

Figure 5: Swiffer pads can be recycled through Terracycle programs.

Storage:

To maintain the moisture and effectiveness of unused cloths, ensure the packaging is properly sealed after each use. Store in a cool, dry place away from direct sunlight.

5. Safety Information

Please read and follow all safety precautions to prevent accidents and ensure safe use of Swiffer Sweeper Wet Mopping Cloths.

• Avoid Accidents: Keep out of reach of children and pets to avoid accidental ingestion.
• Eye Contact: In case of eye contact, flush immediately with water to reduce irritation. If irritation persists, consult a physician.
• Skin Exposure: For prolonged exposure to skin, flush with water to reduce irritation. If irritation persists, consult a physician.
• Floor Compatibility: Do not use Swiffer Sweeper Wet Mopping Cloths on unfinished, oiled or waxed wooden boards, non-sealed tiles, or carpeted floors because they may be water sensitive.
• Mop Pole Pressure: Avoid exerting excessive pressure on the mop pole as breakage may occur.
• Ingredients: Swiffer Wet contains no phosphate.

6. Ingredients

The cleaning solution in Swiffer Sweeper Wet Mopping Cloths contains the following ingredients:

• Water
• Propylene Glycol Butyl Ether
• Caprylyl/Capryl Glucoside
• Didecyldimonium Chloride
• Lauryl Glucoside
• PPG-26-Buteth-26
• Acrylic Copolymer
• Castor Oil
• Dimethicone
• Methylchloroisothiazolinone
• Perfume

7. Specifications

Key specifications for Swiffer Sweeper Wet Mopping Cloth Multi Surface Refills:

Figure 6: Comparison of Swiffer Sweeper Wet and Heavy Duty options.

8. Troubleshooting

If you encounter any issues with your Swiffer Sweeper Wet Mopping Cloths, consider the following:

• Cloth Drying Out: Ensure the packaging is tightly sealed after each use to prevent cloths from drying. If cloths are dry, they may not clean effectively.
• Ineffective Cleaning: For heavily soiled areas, a fresh cloth may be required. Ensure the cloth is properly attached to the sweeper head.
• Streaking: Ensure the correct type of cloth is used for your floor surface. Avoid using on water-sensitive floors.

9. Warranty and Support

For information regarding product warranty, returns, or customer support, please refer to the official Swiffer website or contact Procter & Gamble Home Care directly. Swiffer offers a worry-free purchase guarantee; if you are not completely satisfied, please check their money-back guarantee policy.