iLive iSB35B Portable Wireless Speaker with Color Changing Glow Ring

Introduction

This manual provides instructions for the setup, operation, and maintenance of your iLive iSB35B Portable Wireless Speaker. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your listening experience.

Image: The iLive iSB35B Portable Wireless Speaker, a compact black speaker with a color-changing glow ring visible at its base, reflecting on a white surface.

Key Features

• Portable speaker with Bluetooth v2.1 support for wireless audio streaming.
• Integrated color-changing glow ring with customizable color selection.
• Wireless operating range of up to 60 feet.
• Built-in rechargeable lithium-ion battery providing approximately 3 hours of playback.
• Micro USB port for convenient battery recharging.
• Auxiliary input for wired connection to audio devices.

What's in the Box

• iLive iSB35B Portable Wireless Speaker
• Micro USB to USB charging cable

Setup

1. Charging the Speaker

1. Locate the Micro USB port on the speaker.
2. Connect the smaller end of the included Micro USB to USB cable to the speaker's Micro USB port.
3. Connect the larger USB end of the cable to a powered USB port (e.g., computer, USB wall adapter).
4. Allow the speaker to charge fully before first use. The charging indicator light will typically change color or turn off when charging is complete. A full charge provides approximately 3 hours of playback.

2. Powering On/Off

• To power on, press and hold the Power button (refer to device diagram for location).
• To power off, press and hold the Power button again.

Operating Instructions

1. Bluetooth Pairing

1. Ensure the speaker is powered on and within 60 feet of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to device diagram for location).
3. On your device, navigate to the Bluetooth settings and enable Bluetooth.
4. Select "iSB35B" from the list of available devices.
5. Once paired, the LED indicator will typically stop flashing and remain solid, and a confirmation tone may sound.
6. You can now stream audio wirelessly from your device to the speaker.

2. Auxiliary Input (AUX)

1. Connect one end of a 3.5mm audio cable (not included) to the AUX input port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the headphone jack or audio output of your external audio device.
3. The speaker will automatically switch to AUX mode.

3. Controlling Audio Playback

• Volume control is typically managed directly from your connected device.
• Playback controls (play/pause, skip track) may be available on the speaker via touch controls, or primarily through your connected device.

4. Color Changing Glow Ring

• The glow ring automatically cycles through a spectrum of colors during operation.
• To select a specific color, refer to the speaker's touch controls. A tap or press on a designated area (refer to device diagram) may cycle through colors or lock onto a preferred hue.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in constant use.
• Water Exposure: This speaker is not waterproof. Avoid exposing it to water or excessive moisture.

Troubleshooting

Specifications

• Model: iSB35B
• Brand: iLive Electronics
• Speaker Type: Wireless, Portable
• Connectivity: Bluetooth v2.1, 3.5mm Auxiliary Input
• Bluetooth Range: Up to 60 feet (18 meters)
• Power Output: 3 Watts
• Impedance: 4 Ohm
• Power Source: Built-in Rechargeable Lithium-ion Battery
• Battery Life: Approximately 3 hours
• Charging Port: Micro USB
• Dimensions: 3.94 x 3.94 x 3.94 inches (10 x 10 x 10 cm)
• Weight: 9.6 ounces (0.27 kg)
• Color: Black
• Special Features: Color-changing glow ring, Touch control

Warranty Information

iLive Electronics products typically come with a limited warranty. For specific details regarding the warranty period and coverage for your iSB35B speaker, please refer to the warranty card included with your purchase or visit the official iLive Electronics website. Keep your proof of purchase for warranty claims.

Support

For further assistance, technical support, or to view frequently asked questions, please visit the official iLive Electronics support website or contact their customer service department. Contact information can usually be found on the brand's official website.

Website: www.iliveelectronics.com