CleanSmart Daily Surface Cleaner and Pet-Safe Disinfectant Instruction Manual

1. Introduction

The CleanSmart Daily Surface Cleaner is an effective disinfectant designed for daily household use. It is formulated to kill 99.9% of viruses and bacteria on hard, non-porous surfaces, breaking down to a saline solution after use, leaving no harsh chemical residue. This product is suitable for use in homes with children and pets.

2. Product Features

• Effective Disinfection: Kills 99.9% of viruses and bacteria, including Flu, Strep, MRSA, E. Coli, and Staph.
• No Harsh Residue: Breaks down to a saline solution, eliminating the need for rinsing on most surfaces.
• Pet-Safe and Child-Friendly: Formulated without alcohol, ammonia, bleach, fragrance, or dyes, making it safe for use around pets and children.
• Multi-Surface Use: Ideal for countertops, pet bowls, highchairs, floors, toys, and other hard, non-porous surfaces.
• Natural Ingredients: Made with simple ingredients: ionized water, salt, and Hypochlorous Acid.

Image: CleanSmart Daily Surface Cleaner effectively eliminates 99.9% of bacteria and viruses.

Image: The cleaner is made with 100% natural ingredients, suitable for various household surfaces.

3. Ingredients

The CleanSmart Daily Surface Cleaner contains the following active and inactive ingredients:

• Active Ingredient: Hypochlorous Acid
• Inactive Ingredient: Water

4. Usage Instructions

Always test a small, inconspicuous area first. Do not use on unsealed wood, marble, or granite.

General Cleaning and Disinfection of Hard, Non-Porous Surfaces:

1. For heavily soiled areas, pre-clean the surface before disinfection.
2. Spray the CleanSmart Daily Surface Cleaner directly onto the surface until it is thoroughly wet.
3. Allow the surface to remain wet for 10 minutes to disinfect.
4. Wipe the surface with a paper towel or a clean cloth.

Disinfection of Hard, Non-Porous Food Contact Surfaces:

1. For heavily soiled areas, pre-clean the surface first.
2. Spray the CleanSmart Daily Surface Cleaner directly onto the surface until it is thoroughly wet.
3. Allow the surface to remain wet for 60 seconds to disinfect.
4. Wipe the surface with a paper towel or a clean cloth. No rinse is required.

Sanitization of Hard, Non-Porous Surfaces:

1. For heavily soiled areas, pre-clean the surface first.
2. Spray the CleanSmart Daily Surface Cleaner directly onto the surface until it is thoroughly wet.
3. Allow the surface to remain wet for 10 seconds to sanitize.
4. Wipe the surface with a paper towel or a clean cloth.

Image: CleanSmart is suitable for use on various surfaces including cutting boards, appliances, high chairs, and countertops.

5. Safety Information

General Precautions:

• KEEP OUT OF REACH OF CHILDREN.
• Do not mix with other household or industrial products containing ammonia.
• Avoid contact with eyes. In case of contact, flush thoroughly with water.
• If irritation persists, consult a physician.

Legal Disclaimer:

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is an EPA-registered disinfectant.

Image: The CleanSmart Daily Surface Cleaner is safe for use around pets.

6. Storage and Disposal

Storage:

• Store in the original sealed container at room temperature.
• Keep away from direct sunlight and heat to maintain product efficacy.

Disposal:

• Do not reuse or refill this container.
• Offer for recycling if available. Do not flush.

7. Product Specifications

8. Troubleshooting

Sprayer Not Functioning:

If the spray bottle mechanism does not work, ensure the nozzle is rotated to the 'spray' or 'stream' position and not 'off'. If the issue persists, the contents may need to be transferred to a functional spray bottle. This is an uncommon issue, but can occur.

9. Manufacturer Information

For further information or support, please visit the official CleanSmart store or contact the manufacturer, Simple Science LLC.

Visit the CleanSmart Store on Amazon