Funko POP TV The Strain Dr. Ephraim Goodweather Action Figure User Manual

1. Introduction

This manual provides essential information for the care and display of your Funko POP TV The Strain Dr. Ephraim Goodweather Action Figure. This collectible figure is part of the popular Funko POP! series, featuring characters from the FX television series, The Strain.

Figure of Dr. Ephraim Goodweather from The Strain, holding a knife. This figure is approximately 3 3/4 inches tall and features the distinctive Funko POP! stylized design.

2. Setup and Display

Your Funko POP! figure comes packaged in a window display box, designed for both protection and presentation. Follow these steps for optimal display:

1. Unboxing: Carefully remove the figure from its packaging. The window box is designed to be collectible itself, so handle with care if you intend to preserve it.
2. Placement: Choose a stable, flat surface for display. Ensure the area is free from direct sunlight, extreme temperatures, and excessive humidity to prevent damage or discoloration over time.
3. Stability: Most Funko POP! figures are designed to stand independently. If your figure seems unstable, ensure its feet are flat on the surface. Some figures may include a clear plastic stand for added stability; if included, attach it to the figure's feet and the base.

The Funko POP! Dr. Ephraim Goodweather figure displayed alongside its original window packaging, highlighting the collectible nature of the box.

3. Handling and Care

While Funko POP! figures are durable, proper handling and care will ensure their longevity and preserve their condition.

• Gentle Handling: Handle the figure by its body, avoiding excessive pressure on smaller parts like limbs or accessories.
• Cleaning: To remove dust, gently wipe the figure with a soft, dry, lint-free cloth. For more stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive cleaners. Ensure the figure is completely dry before returning it to display.
• Storage: If storing the figure, keep it in its original packaging or a protective container in a cool, dry place away from direct light.

4. Troubleshooting

Most issues with Funko POP! figures are minor and can be easily addressed.

• Figure Instability: If the figure does not stand upright, check for any warping on the feet or base. Gently adjust if possible. Ensure it is placed on a perfectly flat surface.
• Minor Paint Imperfections: Small paint variations are common in mass-produced collectibles. These are typically not considered defects.
• Stuck Head/Parts: Some figures have bobble-heads or movable parts. If a part seems stuck, do not force it. Gentle, consistent pressure or slight warming (e.g., with warm air from a hairdryer on a low setting, held at a distance) might help, but proceed with caution to avoid damage.

5. Specifications

6. Warranty and Support

Funko POP! figures are primarily collectible items. For specific warranty information or support regarding manufacturing defects, please refer to the official Funko website or contact their customer service directly.

You can find more information and other products from Funko by visiting the Funko Store on Amazon.