Product Overview
The Gtechniq I2 Tri-Clean is an advanced all-surface automotive interior cleaner designed to maintain the freshness and cleanliness of your vehicle's interior. This product effectively removes dirt-attracting residues and acts as an odor absorber, ensuring surfaces remain fresh. It is safe for use on various interior materials, including leather, dashboards, carpets, and upholstery. Infused with BioCote® antimicrobial technology, I2 Tri-Clean also provides antibacterial properties, inhibiting the growth of odor-causing microbes and bacteria on treated surfaces.
- All-Surface Automotive Interior Odor Absorber
- Ensures Surfaces Remain Fresh
- Removes Dirt Attracting Residues
- Safe on Leather, Dash, Carpets, Upholstery
Safety Information
Always read the product label before use. Keep out of reach of children and pets. Avoid contact with eyes and prolonged contact with skin. In case of contact, rinse thoroughly with water. Use in a well-ventilated area. Do not ingest. If swallowed, seek medical attention immediately. Wear appropriate personal protective equipment, such as gloves and eye protection, during application.
Setup
The Gtechniq I2 Tri-Clean comes with a separate spray trigger. To prepare for use, simply remove the cap from the bottle and securely attach the spray trigger. Ensure it is tightened to prevent leaks during application.
Image: Gtechniq I2 Tri-Clean bottle with the spray trigger attached, ready for use.
Operating Instructions
- Preparation: Shake the bottle well before each use.
- Test Area: Always test the product on an inconspicuous area first to ensure compatibility and colorfastness, especially on delicate materials like leather.
- Application: Spray a small amount of I2 Tri-Clean directly onto a clean microfiber cloth. Alternatively, for heavily soiled areas, you may spray directly onto the surface.
- Cleaning: Gently wipe the surface with the microfiber cloth, working in small sections. For stubborn dirt or stains, use a soft interior brush to agitate the area before wiping.
- Finishing: Use a separate clean, dry microfiber cloth to buff the surface dry. This will remove any excess product and leave a clean, fresh finish.
- Antibacterial Protection: The BioCote® antimicrobial technology will continue to protect the treated surfaces against bacteria and microbes, helping to keep your interior cleaner and more hygienic for longer.
Image: A gloved hand spraying Gtechniq I2 Tri-Clean onto a gray microfiber cloth.
Image: A gloved hand spraying Gtechniq I2 Tri-Clean directly onto a car's interior door panel.
Image: A gloved hand wiping a car's interior seat with a microfiber cloth after applying Gtechniq I2 Tri-Clean.
Image: A pristine, cleaned car interior, showcasing the results of using Gtechniq I2 Tri-Clean.
Watch the Gtechniq Tri-Clean Application Guide
Video: An official guide from The Rag Company demonstrating the application of Gtechniq Tri-Clean for interior cleaning and protection.
GTECHNIQ - i2 Tri Clean Overview
Video: A detailed overview of Gtechniq i2 Tri-Clean, highlighting its features and benefits for car interior care.
I2 Tri-Clean Gtechniq Product Demonstration
Video: A demonstration of Gtechniq I2 Tri-Clean in action, showing its effectiveness on various interior surfaces.
Maintenance
To maintain the effectiveness of Gtechniq I2 Tri-Clean, ensure the bottle is tightly sealed after each use. Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. Do not allow the product to freeze. Regularly clean your microfiber cloths to prevent cross-contamination and ensure optimal cleaning performance.
Troubleshooting
- Streaking: If streaks appear on the surface, it may indicate too much product was applied or not thoroughly buffed. Re-wipe the area with a clean, damp microfiber cloth, then buff dry with a fresh, dry cloth.
- Stubborn Stains: For persistent stains, apply a small amount of I2 Tri-Clean directly to the stain, allow it to dwell for a few moments (do not let it dry), then gently agitate with a soft brush or microfiber cloth. Wipe clean and buff dry. Repeat if necessary.
- Odor Persistence: If odors persist after cleaning, ensure the source of the odor has been completely removed. Reapply I2 Tri-Clean to the affected area, allowing its odor-absorbing properties to work. Ensure good ventilation in the vehicle.
Specifications
| Item Model Number | I2 0.5 |
| Product Dimensions | 2.56 x 2.56 x 9.25 inches |
| Item Weight | 1.21 Pounds (0.55 Kilograms) |
| Item Form | Liquid |
| Specific Uses For Product | Multi-surface cleaner |
| Surface Recommendation | Fabric, Leather |
| Item Volume | 16.9 Fluid Ounces (500 Milliliters) |
| Manufacturer | Gtechniq |
Warranty Information
Gtechniq products are manufactured to high standards. For specific warranty details regarding the I2 Tri-Clean All-Surface Cleaner, please refer to the official Gtechniq website or contact their customer support directly. Keep your proof of purchase for any warranty claims.
Customer Support
For further assistance, product inquiries, or technical support, please visit the official Gtechniq website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.