IKEA EDSVIK
Edsvik Double Control Kitchen Faucet User Manual
Model: EDSVIK | Brand: IKEA
1. Product Overview
The IKEA Edsvik double control kitchen faucet is designed for efficiency and durability. It features a water and energy-saving mechanism that reduces water flow while maintaining optimal pressure. The mixer tap is equipped with robust ceramic discs, engineered to withstand the friction associated with frequent temperature adjustments. Its high spout design facilitates easy washing of dishes, including large pots. The faucet is constructed from chrome-plated brass, providing a hard, durable, and easy-to-clean surface.
Key Features:
- Water and Energy Saving: Integrated flow regulator (5.5 l/min) for high-pressure systems.
- Durable Construction: Ceramic discs for long-lasting performance and chrome-plated brass finish.
- High Spout Design: Enhances convenience for washing large items.
- 360° Swivel Spout: Provides flexibility and ease of use.
- Dual Control: Separate handles for hot and cold water.
- Height: 30 cm.
Figure 1: Fully assembled Edsvik kitchen faucet, highlighting its design and chrome finish.
2. Setup and Installation
Installation of the Edsvik kitchen faucet should be performed in accordance with valid local building and plumbing regulations. If you are uncertain about the installation process, it is highly recommended to contact a qualified professional.
Installation Requirements:
- Mounting Hole: Requires a single hole with a maximum diameter of 35 mm.
- Sink/Worktop Thickness: Suitable for sinks or worktops up to 50 mm thick.
- Connections: Includes 3/8 inch connection hoses, 35 mm in length.
- Tool Included: A specialized tool is provided to assist in securely screwing the mixer tap into place.
Installation Steps (General Guidance):
- Ensure water supply is turned off at the main valve.
- Prepare the mounting hole on your sink or worktop according to the specified dimensions.
- Attach the connection hoses to the faucet base.
- Insert the faucet into the mounting hole.
- Secure the faucet from underneath the sink/worktop using the provided fastening mechanism and tool.
- Connect the hot and cold water supply lines to the corresponding faucet hoses. Ensure all connections are tight to prevent leaks.
- Slowly turn on the main water supply and check for any leaks.
- Flush the faucet for a few minutes to clear any debris from the lines.
Figure 2: Edsvik faucet with pre-attached supply hoses, illustrating components for installation.
3. Operating Instructions
The Edsvik faucet features two cross-type handles for precise control over water flow and temperature.
- Cold Water: Turn the right handle counter-clockwise to open the cold water flow.
- Hot Water: Turn the left handle counter-clockwise to open the hot water flow.
- Temperature Control: Adjust the mix of hot and cold water by manipulating both handles simultaneously to achieve the desired temperature.
- Flow Control: The faucet is designed with a flow regulator to optimize water usage. The flow rate is approximately 5.5 liters per minute.
- Swivel Spout: The spout can be rotated 360 degrees for convenience in multi-basin sinks or for filling large containers.
4. Maintenance and Care
Proper maintenance will ensure the longevity and appearance of your Edsvik kitchen faucet. The chrome-plated brass surface is durable and easy to clean.
Cleaning Instructions:
- Clean the faucet regularly with a soft cloth dampened with water and a mild, non-abrasive dish soap.
- Rinse thoroughly with clean water to remove any soap residue.
- Dry the faucet immediately with a soft, dry cloth to prevent water spots and maintain its shine.
- Avoid: Do not use abrasive sponges, scouring pads, or cleaning agents containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the chrome finish.
General Maintenance:
- Periodically check all connections for leaks. Tighten if necessary, but do not overtighten.
- If water flow decreases, the aerator at the end of the spout may be clogged. Unscrew the aerator, clean any debris, and reattach.
5. Troubleshooting
This section addresses common issues you might encounter with your Edsvik kitchen faucet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; low water pressure in the building. | Clean or replace aerator; ensure shut-off valves are fully open; consult a plumber if building pressure is consistently low. |
| Leaking from Spout | Worn ceramic discs or seals. | Contact a qualified plumber or IKEA customer service for replacement parts or professional repair. |
| Leaking from Base | Loose mounting nut; damaged O-ring. | Tighten mounting nut (do not overtighten); inspect and replace O-rings if damaged. |
| Difficulty Adjusting Temperature | Issues with ceramic discs or water supply. | Ensure both hot and cold water supplies are fully open. If problem persists, professional inspection may be required. |
6. Specifications
| Attribute | Detail |
|---|---|
| Model Number | EDSVIK |
| Brand | IKEA |
| Color | Chrome |
| Finish | Brass |
| Material | Chrome-plated Brass |
| Installation Type | One Hole, Deck Mount |
| Number of Holes Required | 1 |
| Number of Handles | 2 |
| Handle Type | Cross |
| Handle Placement | Center |
| Height | 30 cm |
| Recommended Pressure | 1.0–5.0 bar (100 kPa – 500 kPa) |
| Maximum Pressure | 16 bar (1600 kPa) |
| Maximum Hot Water Temperature | 80 °C / 176 °F |
| Swivel Spout | 360° |
| Flow Rate | 5.5 l/min (for high-pressure systems) |
7. Warranty and Support
Information regarding specific warranty terms and customer support contact details for the IKEA Edsvik kitchen faucet is not available in the provided product data. For warranty claims, spare parts, or further assistance, please refer to the official IKEA website or contact IKEA customer service directly in your region.
You may also find additional information by visiting the seller's store on Amazon.