Introduction
Thank you for choosing the Tecnolite REFLED-R/37W/30/N LED Reflector. This manual provides essential information for the safe installation, operation, and maintenance of your new LED reflector. Please read this manual thoroughly before installation and keep it for future reference.
Important Safety Instructions
Always follow basic safety precautions when installing and operating electrical products to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
- Do not operate the reflector if the power cord or plug is damaged.
- Do not look directly into the LED light source when the reflector is operating.
- This product is designed for specific voltage (MV - Multi-Voltage, typically 100-240V). Verify your power supply matches the product's requirements.
- Keep the reflector away from flammable materials.
Package Contents
Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact your retailer.
- 1 x Tecnolite REFLED-R/37W/30/N LED Reflector
- Mounting Bracket (pre-attached)
- Instruction Manual (this document)
Setup and Installation
The Tecnolite REFLED-R/37W/30/N LED Reflector is designed for easy installation. Follow these steps carefully:
- Preparation: Disconnect power at the circuit breaker before beginning installation. Ensure the mounting surface is sturdy enough to support the reflector's weight (approximately 5.96 kg).
- Mounting: Use appropriate screws and anchors (not included) to securely attach the reflector's mounting bracket to the desired surface. The bracket allows for angle adjustment.
- Electrical Connection: Connect the reflector's power cable to your electrical supply. Ensure proper wiring (Live, Neutral, Ground) according to local electrical codes. This reflector operates on multi-voltage (MV) and consumes 37 watts.
- Adjust Angle: Once securely mounted and wired, adjust the reflector to the desired lighting angle using the screws on the mounting bracket.
- Restore Power: After installation is complete and all connections are secure, restore power at the circuit breaker.
Figure 1: Front view of the Tecnolite REFLED-R/37W/30/N LED Reflector, showcasing its black circular design with multiple LED light sources and the sturdy mounting bracket.
Figure 2: Dimensional drawing of the Tecnolite REFLED-R/37W/30/N LED Reflector, indicating key measurements for installation planning: 143mm width, 193mm depth, 230mm total height, and 138mm bracket height.
Operating Instructions
Once installed and powered, the Tecnolite REFLED-R/37W/30/N LED Reflector is ready for use.
- Power On/Off: The reflector will illuminate when power is supplied to its circuit. Use a wall switch or circuit breaker to control power.
- Dimming Feature: This reflector is dimmable. If connected to a compatible dimmer switch (not included), you can adjust the light intensity. Ensure the dimmer switch is rated for LED loads and compatible with the reflector's specifications.
Maintenance
The Tecnolite REFLED-R/37W/30/N LED Reflector requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the reflector. Do not use abrasive cleaners or solvents.
- LED Lifespan: The integrated LED light source is designed for a long operational life and is not user-replaceable.
- Inspection: Periodically inspect the wiring and mounting for any signs of wear or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reflector does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker; ensure all connections are secure; test the switch. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch; unstable power supply; loose connection. | Ensure dimmer is LED compatible; check power stability; verify wiring. |
| Reflector gets excessively hot. | Improper ventilation; operating in high ambient temperature. | Ensure adequate airflow around the unit; operate within specified temperature ranges. |
If you experience issues not listed here, or if the problem persists after attempting the solutions, please contact Tecnolite customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | REFLED-R/37W/30/N |
| Brand | Tecnolite |
| Light Type | LED |
| Wattage | 37 watts |
| Color Temperature | 3000K (Warm White) |
| Special Feature | Dimmable |
| Dimensions (L x W x H) | 26.5 x 26.5 x 28 cm |
| Weight | 5.96 kg |
| Power Source | Corded Electric (MV - Multi-Voltage) |
| Batteries Required | No |
Warranty and Support
Tecnolite products are manufactured to high-quality standards. For warranty information or technical support, please contact Tecnolite customer service or visit their official website. Keep your purchase receipt as proof of purchase.
Tecnolite Official Website: www.tecnolite.mx