ACO Polymer Products 37100 Stainless Steel Tile Drain Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ACO Polymer Products 37100 Stainless Steel Tile Drain. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product.

The ACO 37100 is designed to provide efficient drainage in tiled shower areas, offering a sleek and modern aesthetic while ensuring effective water removal. Its stainless steel construction ensures durability and resistance to corrosion.

Product Overview

The ACO 37100 Stainless Steel Tile Drain is a robust and functional component for modern bathroom designs. Key features include:

• Stainless Steel Sieve/Strainer: Located within the 2-inch diameter outlet, this component collects hair and debris, preventing clogs. Note that using the strainer may slightly reduce the overall flow performance of the shower channel.
• Lifting Keys: Included with each unit, these keys facilitate easy removal of the grate for routine maintenance and cleaning.
• Leveling Feet: Standard with each unit, these feet provide stability and allow for precise height adjustment during installation, simplifying the process.

Image: ACO 37100 Stainless Steel Tile Drain. This image shows the complete drain unit, highlighting its stainless steel construction and design.

Setup and Installation

Proper installation is crucial for the optimal performance of your tile drain. It is recommended that installation be performed by a qualified professional.

Tools and Materials Required:

• Standard plumbing tools
• Level
• Measuring tape
• Sealant appropriate for wet environments
• Tiling materials (mortar, grout, tiles)

Installation Steps:

1. Prepare the Area: Ensure the shower floor substrate is clean, level, and ready for waterproofing. The area where the drain will be placed should be properly prepared according to local building codes.
2. Position the Drain: Place the ACO 37100 drain body in the desired location. Ensure it is correctly aligned with the planned tile layout.
3. Adjust Leveling Feet: Use the integrated leveling feet to precisely adjust the height and ensure the drain is perfectly level with the finished floor height. This is critical for proper water flow and tiling.
4. Connect to Plumbing: Connect the 2-inch diameter outlet of the drain to the existing waste pipe system. Ensure all connections are secure and watertight using appropriate plumbing sealants.
5. Waterproofing: Apply a suitable waterproofing membrane around the drain body and across the entire shower floor, ensuring a seamless seal to prevent leaks. Follow the manufacturer's instructions for the waterproofing product.
6. Tile Installation: Install tiles around the drain, ensuring a slight slope towards the drain for effective water runoff. The drain grate should sit flush with the finished tile surface.
7. Grouting: Once tiles are set, apply grout, ensuring all gaps are filled and sealed. Clean any excess grout from the drain grate and surrounding tiles.

Operation

The ACO 37100 Stainless Steel Tile Drain operates passively to remove water from your shower area. No active user intervention is required during normal use.

• Ensure the drain grate is always in place during shower use.
• The internal sieve/strainer will collect hair and debris, preventing them from entering the plumbing system.
• Regularly check the drain for any obstructions to maintain optimal flow.

Maintenance

Regular maintenance ensures the longevity and efficient performance of your ACO 37100 drain.

Routine Cleaning:

1. Remove Grate: Use the provided lifting keys to carefully remove the stainless steel grate from the drain body.
2. Clean Sieve/Strainer: Remove the internal sieve/strainer. Dispose of any collected hair and debris. Rinse the sieve/strainer thoroughly under running water.
3. Clean Drain Channel: Clean the inside of the drain channel to remove any soap scum or residue. A mild non-abrasive cleaner and a soft brush are recommended.
4. Inspect: Check the drain body and grate for any signs of damage or excessive wear.
5. Reassemble: Place the clean sieve/strainer back into the drain outlet, then carefully reinsert the grate, ensuring it sits flush.

Frequency: It is recommended to perform this routine cleaning at least once a month, or more frequently in high-use environments.

Avoid Harsh Chemicals: Do not use abrasive cleaners, steel wool, or harsh chemical drain cleaners, as these can damage the stainless steel finish and internal components.

Troubleshooting

This section addresses common issues you might encounter with your ACO 37100 Stainless Steel Tile Drain.

Specifications

Warranty Information

Specific warranty details for the ACO Polymer Products 37100 Stainless Steel Tile Drain are typically provided at the point of purchase or can be found on the official ACO Polymer Products website. Please retain your proof of purchase for warranty claims.

Generally, ACO products are manufactured to high standards and are covered against manufacturing defects. For detailed terms and conditions, including warranty period and claim procedures, please refer to the documentation included with your product or visit the manufacturer's website.

Support and Contact Information

For technical assistance, installation queries, or warranty support, please contact ACO Polymer Products directly.

• Manufacturer: ACO Polymer Products
• Contact Information: Please refer to the official ACO Polymer Products website or product packaging for the most current contact details, including phone numbers and email addresses for customer support.

When contacting support, please have your product model number (37100) and proof of purchase readily available.