Introduction
Thank you for choosing the WARM FUZZY Jellyfish Lamp. This instruction manual provides important information for the safe and proper setup, operation, and maintenance of your new lamp. Please read it thoroughly before use and retain it for future reference. This lamp is designed to provide a calming and visually engaging experience with its realistic jellyfish movement and color-changing LED lights, powered by either batteries or USB.
Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- WARNING: CHOKING HAZARD — Small parts. Not for children under 3 years. Adult supervision is recommended for children aged 12 and up.
- This product is NOT WATERPROOF and is not water-resistant. Do not submerge the lamp in water or expose it to excessive moisture. Keep away from sinks, bathtubs, and other wet environments.
- Ensure the battery compartment is securely closed to prevent water ingress or battery leakage.
- Use only the specified battery type (3-AA batteries, not included). Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the lamp will not be used for an extended period to prevent leakage.
- If using USB power, ensure the USB cable and power adapter (not included) are in good condition and compatible with the lamp's power requirements.
- Do not attempt to open or modify the lamp's sealed components. This may cause damage and void any potential warranty.
- Place the lamp on a stable, flat surface to prevent it from tipping over.
Package Contents
Carefully unpack the box and ensure all items are present:
- 1 x WARM FUZZY Jellyfish Lamp Unit
- Artificial Jellyfish/Jelly Balls
- 1 x USB Power Cable (if included, check packaging)
Note: 3-AA batteries are required for battery operation and are not included.
Image: WARM FUZZY Jellyfish Lamp in its retail packaging.
Setup
Follow these steps to set up your Jellyfish Lamp:
- Prepare the Lamp: Carefully remove the lamp from its packaging.
- Add Water: Open the top cap of the lamp. Fill the lamp with distilled water up to the indicated fill line. Avoid overfilling.
- Insert Jellyfish: Place the artificial jellyfish/jelly balls into the water. Ensure they are fully submerged. If air bubbles cling to the jellyfish, gently push them down with a non-abrasive stick until the bubbles detach. Air bubbles can prevent proper movement.
- Close the Cap: Securely close the top cap of the lamp to prevent water leakage.
- Power Options:
- Battery Power: Locate the battery compartment on the bottom of the lamp. Insert 3-AA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
- USB Power: Connect the provided USB cable to the lamp's USB port. Plug the other end into a compatible USB power adapter (e.g., phone charger, computer USB port) or a power bank.
- Placement: Place the lamp on a stable, flat surface away from direct sunlight or heat sources.
Image: The WARM FUZZY Jellyfish Lamp in operation, showcasing its illuminated jellyfish.
Operating Instructions
The WARM FUZZY Jellyfish Lamp features a simple touch control for operation:
- Power On/Off: Locate the touch switch, typically on the base or side of the lamp. Touch it once to turn the lamp on. Touch it again to turn the lamp off.
- Color Changing: The lamp is designed to cycle through a variety of colors automatically once turned on. There is no manual control for specific colors; the lamp will transition smoothly between hues.
- Jellyfish Movement: Once powered on, the internal mechanism will create currents to make the artificial jellyfish float and swim realistically. Allow a few minutes for the jellyfish to settle into their movement pattern.
Maintenance
To ensure the longevity and optimal performance of your Jellyfish Lamp, follow these maintenance guidelines:
- Cleaning: Wipe the exterior of the lamp with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic.
- Water Replacement: Over time, the water inside the lamp may become cloudy. For best visual clarity, it is recommended to replace the water every few months. Carefully drain the old water, rinse the interior, and refill with distilled water as per the setup instructions.
- Battery Replacement: When the lights dim or the jellyfish movement becomes sluggish, it is time to replace the batteries. Ensure the lamp is turned off and disconnected from USB power before opening the battery compartment. Replace all 3-AA batteries with new ones, observing correct polarity.
- Storage: If storing the lamp for an extended period, remove the batteries and drain the water. Store in a cool, dry place away from direct sunlight.
Troubleshooting
If you encounter any issues with your WARM FUZZY Jellyfish Lamp, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, dead batteries, loose USB connection. | Check if batteries are inserted correctly and are not depleted. If using USB, ensure the cable is securely connected and the power source is active. Try new batteries or a different USB port/adapter. |
| Jellyfish are not moving or are stuck. | Air bubbles on jellyfish, insufficient water, or internal mechanism issue. | Gently dislodge any air bubbles clinging to the jellyfish. Ensure the water level is correct. If the problem persists after checking power, contact customer support. |
| Water is cloudy. | Mineral buildup or impurities in water. | Drain the old water and refill with fresh distilled water. |
| Lamp is leaking. | Cap not sealed properly, damage to the unit, or battery compartment issue. | Ensure the top cap is securely fastened. Check the battery compartment for any signs of leakage and ensure it is closed tightly. If leakage persists, discontinue use and contact customer support. |
| Lights are dim or inconsistent. | Low battery power. | Replace batteries with new ones or ensure a stable USB power connection. |
Specifications
- Brand: WARM FUZZY
- Model Number: T-930JF_V2
- Product Dimensions: 8"D x 10"W x 12"H
- Item Weight: 0.65 Pounds
- Power Source: Battery Powered (3-AA batteries, not included) or USB
- Light Source Type: LED
- Switch Type: Touch
- Base Material: Plastic
- Water Resistance Level: Not Water Resistant
- Age Range Description: 12 and up
- UPC: 815895013635
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official WARM FUZZY website for further assistance.
Manufacturer: Universal Specialties
Contact Information: Please refer to the retailer's website or the WARM FUZZY brand store for current contact details.
For additional information or to explore other products, visit the WARM FUZZY Store on Amazon.