Bosch QuietCast Premium Ceramic Disc Brake Pad Set

1. Product Overview

Today, one of every three Asian, Domestic, and European vehicles on the road in North America includes Bosch braking components. That's because Bosch has been a key player in the braking industry since applying for its first brake system design patent in 1936. The Bosch QuietCast line draws on this robust experience to deliver OE quality performance, industry-leading strength and durability, and exclusive innovations including Molded Shim Technology (MST). QuietCast pads feature the industry's best pre-attached OE style multilayer rubber core shims, ensuring the highest quality bond between rubber and steel, for lower noise, increased strength, and superior corrosion resistance. The proprietary Ceramic friction material is meticulously engineered to achieve superior performance, exceptional stopping power, and quiet operation with low dust. Corrosion and rust resistant powder-coated backing plates deliver increased product life. OE style slots and chamfers ensure premium quality, fit, and function. Set includes pads for 1 axle (2 wheels), hardware kit (where available), and synthetic lubricant for reduced resistance on sliding contact points.

Key Features:

• The Bosch QuietCast line draws on over 77 years of OE braking excellence; promising the highest quality performance, industry-leading strength and durability, and exclusive innovations including Molded Shim Technology (MST)
• The industry's best pre-attached OE style multilayer rubber core shims ensure the highest quality bond between rubber and steel, resulting in lower noise, increased strength, and corrosion resistance
• Rigorously formulated and tested by Bosch's engineers, the Ceramic friction material in the QuietCast line is meticulously engineered to achieve superior performance, exceptional stopping power, and quiet operation with low dust
• Powder-coated backing plate prevents rust and corrosion for increased product life of the brake pad; Slots and chamfers ensure premium quality, fit, and function
• Set includes pads for 1 axle (2 wheels), hardware kit (where available), and synthetic lubricant for reduced resistance on sliding contact points
• FRONT: Compatible with select vehicles (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): PONTIAC: 2009-10 Vibe; SCION: 2016 iM, 2011-16 tC; TOYOTA: 2017-18 Corolla iM

Figure 1: Complete Bosch QuietCast Premium Ceramic Disc Brake Pad Set, including pads, hardware, and synthetic lubricant.

2. Installation Guide

Important Safety Information:

• Brake system work requires specialized knowledge and tools. Improper installation can lead to brake failure, serious injury, or death.
• It is highly recommended that installation be performed by a qualified automotive technician.
• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
• Ensure the vehicle is securely supported on jack stands on a level surface before beginning any work.
• Refer to your vehicle's specific service manual for detailed brake system procedures and torque specifications.

General Installation Steps (Consult a professional for detailed instructions):

1. Safely lift and support the vehicle, then remove the wheels.
2. Remove the brake caliper and old brake pads. Inspect the brake rotor for wear and damage; replace if necessary.
3. Clean the caliper and caliper bracket thoroughly. Apply the provided synthetic lubricant to all sliding contact points and hardware.
4. Install the new Bosch QuietCast brake pads and hardware. Ensure proper fitment and orientation.
5. Reinstall the brake caliper and torque all fasteners to manufacturer specifications.
6. Reinstall the wheels and lower the vehicle.
7. Pump the brake pedal several times to seat the pads against the rotor before driving.

3. Operation

Initial Break-in Procedure (Bedding-in):

After installing new brake pads, a proper break-in procedure is crucial for optimal performance and longevity. This process, often called "bedding-in," transfers a thin layer of friction material from the pads to the rotor surface, ensuring consistent braking and reducing noise.

1. Find a safe, open area with minimal traffic.
2. Accelerate to approximately 35 mph (56 km/h) and apply moderate braking pressure to slow down to about 5 mph (8 km/h). Do not come to a complete stop.
3. Repeat this process 4-5 times, allowing a short cool-down period between each stop.
4. After the initial series, drive for several minutes without using the brakes to allow them to cool completely.
5. Avoid hard braking or prolonged heavy braking for the first 200-300 miles (320-480 km) after installation.

Driving Considerations:

• Smooth Braking: Apply brake pressure smoothly and progressively for best results and to extend pad life.
• Avoid Overheating: Prolonged or excessive braking, especially on long downhill grades, can cause brake fade. Use lower gears to assist in slowing the vehicle.
• Environmental Factors: Wet conditions or driving through puddles can temporarily reduce braking effectiveness. Apply brakes lightly to dry them out.

4. Maintenance

Regular Inspection:

Regular inspection of your brake pads is essential for safety and performance. It is recommended to inspect brake pads at least every 12,000 miles (19,000 km) or during every tire rotation.

• Check the thickness of the friction material. Most pads have wear indicators that will produce a squealing sound when they are nearing replacement.
• Inspect for uneven wear, cracks, or chipping on the pad surface.
• Examine the brake rotors for deep grooves, cracks, or excessive rust.
• Check the brake fluid level and condition.
• Ensure all brake components are free from leaks and damage.

Replacement Intervals:

Brake pad life varies significantly based on driving habits, vehicle type, and operating conditions. While some pads may last 30,000-70,000 miles (48,000-112,000 km), it is crucial to replace them when the friction material reaches its minimum recommended thickness, typically around 2-3mm, or when wear indicators are activated.

5. Troubleshooting

Below are common issues that may arise with brake pads and potential causes:

If you experience any of these symptoms, it is recommended to have your brake system inspected by a qualified technician immediately.

6. Product Specifications

7. Warranty and Support

For detailed warranty information and customer support, please refer to the official Bosch Automotive website or contact their customer service directly. Warranty terms and conditions may vary by region and product.

For further assistance or technical inquiries, please visit the Bosch Automotive Store on Amazon or the official Bosch website.