Introduction
The TSC TTP-244 Pro is a monochrome barcode printer designed for various applications including shipping, retail, point-of-sale (POS), and warehouse operations. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity.
Setup
1. Unpacking and Inspection
Carefully remove the printer and all accessories from the packaging. Inspect for any signs of damage. Retain the packaging for future transport or storage.
2. Loading Ribbon
The TTP-244 Pro uses a 300-meter ribbon supply on a 1-inch core (coated side out).
- Open the printer's top cover.
- Locate the ribbon supply spindle and take-up spindle.
- Install the new ribbon onto the supply spindle, ensuring the coated side faces outwards.
- Thread the ribbon through the print mechanism and attach it to the take-up spindle. Ensure the ribbon is taut and free of wrinkles.
Image: The TSC TTP-244 Pro printer with its top cover open, illustrating the internal components for ribbon and label installation.
3. Loading Labels
The printer supports labels with a maximum media size of 4 x 6 inches and paper sizes ranging from 40 to 110 mm.
- Open the printer's top cover.
- Adjust the media guides to match the width of your labels.
- Insert the roll of labels onto the media supply spindle.
- Feed the leading edge of the labels through the media sensor and under the print head.
- Close the top cover securely.
4. Connecting to Power and Computer
- Connect the power adapter to the printer's power port and then to an electrical outlet.
- Connect the printer to your computer using a USB 2.0 or RS-232C cable. The printer is compatible with Windows operating systems.
Image: Rear view of the TSC TTP-244 Pro printer, highlighting the power input, USB 2.0, and RS-232C serial interfaces for connectivity.
5. Driver Installation
Install the appropriate printer drivers for your Windows operating system. Drivers are typically provided on a CD with the printer or can be downloaded from the official TSC website. Follow the on-screen instructions for installation.
Operating Instructions
1. Powering On/Off
Press the power button located on the rear of the printer to turn it on or off. The status indicator lights on the control panel will illuminate when the printer is ready.
Image: Front view of the TSC TTP-244 Pro barcode printer, showing the control panel with buttons and indicator lights.
2. Basic Printing
To print labels, ensure the printer is connected to your computer and the drivers are installed. Use your label design software or application to create and send print jobs to the TTP-244 Pro. The printer features a 200 MHz 32-bit RISC processor, 8 MB SDRAM, and 4 MB Flash memory for efficient processing. It supports internally scalable True Type fonts and offers a print speed of up to 5 inches per second (6 ppm monochrome) at 203 DPI resolution.
3. Using the Control Panel
The printer's control panel typically includes a feed button and status indicator lights. The feed button can be used to advance a single label or to calibrate the media sensor (refer to the full user guide for specific calibration procedures).
Maintenance
Regular maintenance ensures consistent print quality and extends the life of your printer.
1. Cleaning the Print Head
The print head should be cleaned regularly, especially if print quality degrades. Use a lint-free cloth moistened with isopropyl alcohol. Gently wipe the print head surface from center to edge. Allow it to dry completely before closing the printer cover.
2. Cleaning Rollers and Media Path
Dust and adhesive residue can accumulate on the rollers and media path. Use a lint-free cloth and isopropyl alcohol to clean these components. Ensure all surfaces are dry before resuming operation.
3. Replacing Ribbon and Labels
Replace the ribbon and label rolls as they run out. Always use high-quality consumables recommended by TSC to prevent damage and ensure optimal print results.
Troubleshooting
This section addresses common issues you might encounter with your TSC TTP-244 Pro printer.
- No Power: Ensure the power cable is securely connected to both the printer and a working electrical outlet. Check the power switch position.
- Poor Print Quality: This can be caused by a dirty print head, incorrect ribbon/label loading, or worn-out ribbon/labels. Clean the print head and check consumable installation. Adjust print darkness settings in your software if necessary.
- Labels Not Feeding Correctly: Verify that labels are loaded properly and the media guides are adjusted to the correct width. Perform a media calibration if the printer is not detecting labels accurately.
- Printer Not Responding: Check the USB or RS-232C cable connection to both the printer and computer. Ensure the correct printer driver is installed and selected in your application. Restart both the printer and computer.
- Error Lights: Refer to the full user guide for a detailed explanation of error codes indicated by the status lights on the control panel.
For more detailed troubleshooting steps, please refer to the official User Guide (PDF).
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | TSC |
| Model Name | TTP 244 |
| Connectivity Technology | USB 2.0, RS-232C |
| Printing Technology | Thermal Transfer / Direct Thermal Barcode Printer |
| Printer Output | Monochrome |
| Max Print Speed Monochrome | 5 inches per second (6 ppm) |
| Resolution | 203 x 203 DPI |
| Processor | 200 MHz 32-Bit RISC |
| Memory | 8 MB SDRAM, 4 MB Flash |
| Ribbon Supply | 300 Meter on 1" Core (Coated Side Out) |
| Maximum Media Size | 4 x 6 inch |
| Paper Size | 40 - 110 mm |
| Item Weight | 3680 Grams |
| Product Dimensions (D x W x H) | 26D x 27W x 21H Centimeters |
| Compatible Devices | Laptops and PC |
| Operating System | Windows |
| Control Method | App, Push Button |
| Special Feature | Portable |
Warranty Information
The TSC TTP-244 Pro Barcode Printer comes with a 1 Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or service, please contact an authorized service center.
Customer Support
For technical assistance, product inquiries, or service requests, please contact TSC customer support. Refer to the official TSC website for the most current contact information and support resources.
