Inada HCP-D6 Robostic Massage Chair User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your Inada HCP-D6 Robostic Relaxing Massage Chair. Please read this manual thoroughly before operating the chair and retain it for future reference.

Safety Instructions

Adherence to the following safety guidelines is crucial for preventing injury and ensuring the longevity of your massage chair.

• Maximum Load: The chair is designed to support a maximum weight of 113 kg (249 lbs). Exceeding this limit may cause damage to the chair or injury to the user.
• Handling: Due to the significant weight of the chair (approximately 113 kg / 249 lbs), exercise extreme caution during movement or relocation. It is recommended to seek assistance to prevent personal injury or damage to the unit.
• Power Supply: Ensure the chair is connected to a 220V, 50/60Hz power outlet. Do not use power adapters or converters unless specifically approved by the manufacturer.
• Children and Pets: Keep children and pets away from the chair during operation.
• Medical Conditions: Consult a physician before using the massage chair if you have any pre-existing medical conditions, are pregnant, or have a pacemaker.
• Unplug When Not in Use: Always unplug the chair from the power outlet when not in use or before cleaning.

Setup

Follow these steps to set up your Inada HCP-D6 massage chair:

1. Unpacking: Carefully remove the chair from its packaging. Retain all packaging materials for potential future transport or service.
2. Placement: Position the chair on a flat, stable surface. Ensure there is sufficient space around the chair, especially behind it, to allow for full recline (horizontal dimensions: approx. 205 x 77 x 90 cm).
3. Power Connection: Connect the power cord securely to the chair's power input and then plug it into a grounded 220V, 50/60Hz electrical outlet.
4. Initial Inspection: Before first use, inspect the chair for any visible damage or loose components. If any issues are found, do not operate the chair and contact customer support.

Operating Instructions

The Inada HCP-D6 offers advanced massage capabilities. Familiarize yourself with the controls for optimal experience.

Figure 1: Inada HCP-D6 Robostic Massage Chair in a reclined position, showcasing its design and integrated remote control.

Powering On/Off

Locate the main power switch, usually at the back or side of the chair. Press it to turn the chair on. To turn off, press the switch again or use the power button on the remote control.

Using the Remote Control

The remote control allows you to select programs, adjust intensity, and control chair movements.

Automatic Programs

The chair features 10 individual automatic programs designed for various massage needs. Select your desired program from the remote control. Each program offers a unique sequence of massage techniques and intensity levels.

Manual Adjustments

You can manually adjust the massage intensity to your preference. Use the dedicated buttons on the remote control to increase or decrease the intensity. The massage area is approximately 640 mm.

Recline Function

The backrest can be adjusted from approximately 120° to 170°. Use the recline buttons on the remote to find your most comfortable position. Ensure no obstructions are behind the chair when reclining.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your massage chair.

• Cleaning: Wipe the chair's synthetic leather (PU) surface with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
• Dusting: Regularly dust the chair to prevent accumulation, especially in crevices.
• Storage: If storing the chair for an extended period, unplug it and cover it to protect it from dust and direct sunlight.
• Professional Service: Do not attempt to repair the chair yourself. Contact authorized service personnel for any repairs or internal maintenance.

Troubleshooting

If you encounter issues with your Inada HCP-D6, refer to the following common troubleshooting steps:

• Chair Not Powering On:

  Check if the power cord is securely plugged into both the chair and the wall outlet.

  Ensure the main power switch on the chair is in the 'ON' position.

  Verify that the electrical outlet is functional by plugging in another device.
• Massage Not Activating:

  Ensure the chair is powered on and the remote control is functioning.

  Select an automatic program or manually activate a massage function via the remote.

• Unusual Noises:

  Minor operational sounds are normal. If you hear loud or unusual noises, immediately turn off the chair and unplug it. Contact customer support.
• Remote Control Not Responding:

  Check if the remote control's batteries (if applicable) need replacement.

  Ensure there are no obstructions between the remote and the chair's receiver.

For issues not covered here, please contact Inada customer support.

Specifications

Warranty and Support

For information regarding warranty coverage, technical support, or service requests, please refer to the warranty card included with your purchase or visit the official Inada website. You may also contact Inada customer service directly for assistance.

Please have your model number (HCP-D6) and purchase date available when contacting support.