Ayra TDC LED Derby Light Effect User Manual

1. Introduction

The Ayra TDC LED Derby is a light effect unit designed to produce multiple narrow, colorful, and moving light beams. It is equipped with a 9W RGB LED chip and features sharp lenses for intense light projection. This device offers versatile operation modes, including standalone and DMX control, making it suitable for various lighting setups.

This manual provides essential information for the safe and efficient operation of your Ayra TDC LED Derby. Please read it thoroughly before use and retain it for future reference.

2. Safety Instructions

• Always connect the unit to a grounded power outlet.
• Ensure the voltage matches the specifications of the unit before connecting to power.
• Do not expose the unit to rain or moisture.
• Avoid direct eye exposure to the light source.
• Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Ensure adequate ventilation around the unit to prevent overheating.
• Mount the unit securely using appropriate clamps and safety cables.
• Disconnect from power before cleaning or performing any maintenance.

3. Package Contents

Verify that your package contains the following items:

• Ayra TDC LED Derby Light Effect Unit
• Power Cable
• User Manual (this document)

Figure 3.1: Ayra TDC LED Derby unit shown with its included power cable.

4. Product Overview

Familiarize yourself with the components and controls of the Ayra TDC LED Derby.

Figure 4.1: Front view of the Ayra TDC LED Derby, showing the LED lenses.

Figure 4.2: Rear panel of the Ayra TDC LED Derby, detailing the display, control buttons, DMX input/output, AC power input/output, and microphone.

Rear Panel Controls and Connections:

• DISPLAY: Digital display for menu navigation and mode indication.
• MENU/UP/DOWN/ENTER Buttons: Used to navigate through settings and select operating modes.
• DMX IN: 3-pin XLR input for DMX control signals.
• DMX OUT: 3-pin XLR output for linking to other DMX devices.
• AC IN/FUSE: Power input (100-240V, 50-60Hz) with integrated fuse holder.
• AC LINK OUT: Power output for daisy-chaining power to other units.
• MIC: Built-in microphone for sound-activated modes.

5. Setup

5.1 Mounting

The Ayra TDC LED Derby can be mounted using its integrated bracket. Ensure the mounting surface or truss is capable of supporting the unit's weight (4 kg). Always use a safety cable when mounting overhead.

• Attach a suitable clamp (not included) to the mounting bracket.
• Secure the unit to a truss or other stable structure.
• Connect a safety cable from the unit's safety eye to the mounting structure.

5.2 Power Connection

Connect the supplied power cable to the AC IN socket on the rear panel and then to a grounded power outlet. Multiple units can be daisy-chained using the AC LINK OUT socket, provided the total current draw does not exceed the maximum rating of the power outlet.

6. Operating Modes

The Ayra TDC LED Derby offers four primary operating modes, selectable via the rear panel display and buttons.

6.1 Standalone Mode

In standalone mode, the unit operates automatically through pre-programmed light shows without external control. Use the MENU button to navigate to standalone programs and the UP/DOWN buttons to select different patterns or effects. Press ENTER to confirm your selection.

6.2 Sound-Activated Mode

The built-in microphone detects ambient sound, and the light effect reacts to the beat of the music. Navigate to the sound-activated mode using the MENU button. The sensitivity of the microphone may be adjustable in some settings.

6.3 Master/Slave Mode

This mode allows multiple Ayra TDC LED Derby units to synchronize their light shows. Connect the DMX OUT of the master unit to the DMX IN of the first slave unit, and then daisy-chain subsequent slave units. Set the master unit to a desired operating mode (e.g., standalone or sound-activated), and set all slave units to slave mode. The slave units will then mimic the master unit's behavior.

6.4 DMX Control Mode

For advanced control, connect the unit to a DMX controller. The Ayra TDC LED Derby uses 5 DMX channels. Set the DMX address for each unit using the MENU and UP/DOWN buttons. Refer to the DMX channel chart below for specific functions.

DMX Channel Chart (5-Channel Mode):

Figure 6.1: Example of multi-color light beams projected by the Ayra TDC LED Derby.

Figure 6.2: Another view of the multi-color light effect, demonstrating beam spread.

7. Maintenance

7.1 Cleaning

To maintain optimal light output and extend the lifespan of the unit, regular cleaning is recommended.

• Disconnect the unit from power before cleaning.
• Use a soft, lint-free cloth to wipe the exterior housing.
• For lenses, use a soft cloth dampened with a mild glass cleaner. Avoid abrasive materials.
• Ensure no liquid enters the unit.

7.2 Fuse Replacement

If the unit does not power on, check the fuse located in the AC IN socket. Disconnect power, open the fuse holder, and replace the fuse with one of the exact same type and rating (e.g., T1A 250V).

8. Troubleshooting

This section addresses common issues you might encounter. If the problem persists, contact customer support.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your local Ayra dealer. Keep your proof of purchase for any warranty claims.