Greenworks PRO 16-Inch 80V Cordless String Trimmer User Manual

Product Overview

The Greenworks Pro 80V System provides commercial-grade power for demanding lawn care tasks. This 16-inch cordless string trimmer is designed for versatile use, featuring an attachment-capable power head that is compatible with most gas attachments. It offers a lightweight design, variable speed trigger for on-demand power, a 14/16-inch cut path, and a durable .080 line diameter bump feed head with a die-cast gearbox. Engineered for durability, its performance is equivalent to a 26cc gas engine, but without the hassle of fuel. The system supports 2Ah and 4Ah batteries, with the 2Ah battery charging in just 30 minutes for continuous operation.

Figure 1: Full view of the Greenworks PRO 16-Inch 80V Cordless String Trimmer.

Setup

Assembly and Initial Setup

Before first use, ensure all components are securely assembled. Attach the guard to the trimmer head using the provided fasteners. Connect the two shaft sections, ensuring the retractable pin aligns with the hole for a secure lock. Finally, attach the adjustable handle to the shaft at a comfortable position and tighten the knob. Once assembled, insert a fully charged 80V battery into the battery slot until it clicks into place.

Figure 2: Composite image illustrating battery insertion, cushioned handle, bump feed head, and 16-inch cutting path.

Figure 3: The attachment-capable power head allows for versatile use with various compatible attachments.

Operating

Operation Guidelines

To operate the trimmer, ensure the battery is fully charged and securely inserted. Press the safety switch and then pull the variable speed trigger to start the motor. The trimmer features a 2-speed motor, allowing you to select between low and high speeds based on the trimming task. For line advancement, simply tap the bump feed head on the ground while the trimmer is running. This will automatically extend the cutting line.

Video 1: Official Greenworks "How to Use" demonstration of the string trimmer.

Figure 4: The variable speed trigger provides precise control over cutting speed.

Figure 5: Close-up of the 0.08-inch dual quiet line and bump feed head for easy line advancement.

Maintenance

Care and Maintenance

The Greenworks PRO 80V String Trimmer is virtually maintenance-free, requiring no gas, oil, or emissions. To ensure longevity and optimal performance, keep the trimmer clean from grass clippings and debris after each use. Store the unit in a dry, protected area. For battery care, always charge the battery fully after use and before long-term storage. The 80V battery features an onboard battery gauge to monitor power levels.

Figure 6: The 80V battery charges quickly, allowing for continuous runtime.

Troubleshooting

Common Issues and Solutions

• Trimmer not starting: Ensure the 80V battery is fully charged and properly seated in the battery compartment. Check that the safety switch is engaged before pulling the trigger.
• Line not feeding: While the trimmer is running, firmly tap the bump feed head on a hard surface (e.g., ground) to advance the line. If the issue persists, check the spool for tangled or broken line.
• Reduced power or short runtime: The battery may be low on charge. Recharge the battery fully. For heavy-duty tasks, ensure the trimmer is set to the high-speed mode.
• Excessive vibration or noise: Inspect the cutting line for uneven length or damage. Replace the line if necessary. Ensure all attachments are securely fastened.

Specifications

Warranty and Support

For detailed warranty information, safety guidelines, and comprehensive troubleshooting, please refer to the official user manual PDF available for download. You can access the user manual here. For additional product support, accessories, or to explore other Greenworks products, visit the official Greenworks Store on Amazon here.