Veronese Design Anubis Statue Instruction Manual

Introduction

This manual provides essential information for the proper handling, display, and care of your Veronese Design Anubis Statue. Crafted with attention to detail, this cold cast resin statue features a bronze finish, depicting the Egyptian God Anubis holding a cobra scepter.

Product Overview

• Material: Cold cast resin, a blend of resin and metallic powder, providing a metallic appearance and detailed texture.
• Finish: Bronze finish with hand-painted accents.
• Design: Depicts the Egyptian God Anubis, known as the god of mummification and the afterlife, holding a cobra scepter.
• Base: Features a stable base with black felt bottom protection.

Image: Front view of the Veronese Design Anubis Statue, showcasing its detailed bronze finish and cobra scepter.

Setup and Placement

Unpacking

1. Carefully remove the statue from its packaging.
2. Inspect the statue for any signs of damage. If damage is present, contact customer support immediately.
3. The cobra scepter may be packaged separately or require gentle attachment. Ensure it is securely placed in Anubis's hand if detachable.

Image: Front view of the Anubis statue, highlighting the cobra scepter.

Placement

• Choose a stable, flat surface for display to prevent accidental tipping.
• Avoid direct sunlight or extreme temperature fluctuations, which can affect the material over time.
• Keep the statue away from areas where it might be easily knocked over by pets or children.

Operating (Display and Handling)

This statue is designed for decorative purposes. No operational functions are present.

• When moving the statue, always lift it from the base to ensure stability and prevent damage to delicate parts.
• Avoid holding the statue by the scepter or other protruding elements.
• The black felt on the bottom protects surfaces from scratches.

Image: Side view of the Anubis statue, showing its profile and the scepter's length.

Maintenance and Care

Cleaning

• Dust the statue regularly with a soft, dry cloth or a soft-bristled brush.
• For more thorough cleaning, gently wipe with a slightly damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Ensure the statue is completely dry after cleaning.

General Care

• Avoid dropping or subjecting the statue to strong impacts, as cold cast resin can be brittle.
• Do not expose the statue to prolonged moisture or humidity.

Image: Back view of the Anubis statue, showing the intricate details of the cloak and hair.

Troubleshooting

• Scepter is loose: Gently re-insert the scepter into the designated opening in Anubis's hand. If it remains loose, a small amount of non-permanent adhesive (e.g., museum putty) can be used for stability.
• Statue appears unstable: Ensure the statue is placed on a completely flat and level surface. The felt bottom should provide adequate grip.
• Minor surface scratches: Due to the cold cast bronze finish, minor scratches may be carefully touched up with appropriate art supplies if desired, though this is not officially recommended by the manufacturer.

Specifications

Image: Anubis statue with overlaid dimensions: 10.88 inches height, 5.75 inches length, 3.75 inches width.

Warranty and Support

For information regarding warranty coverage or customer support, please refer to the retailer's return policy or contact Veronese Design directly through their official channels. Keep your purchase receipt as proof of purchase.

Manufacturer: Veronese Design

ASIN: B00VVRDZ80