Elixir 14702

Elixir Strings Electric Bass Guitar Strings with NANOWEB Technology

Model: 14702

Introduction

This manual provides essential information for the installation, use, and maintenance of your Elixir Strings Electric Bass Guitar Strings with NANOWEB Technology. These strings are designed for electric bass guitars, offering a bright tone with deep lows and a smooth, comfortable feel, while providing extended tone life due to their proprietary coating.

Key Features

  • Longest-Lasting Tone: Stainless steel wrap wire with NANOWEB Technology for extended tone life.
  • Bright Tone: Delivers a brilliant tone with deep lows.
  • Comfortable Feel: Smooth and comfortable playing experience.
  • Corrosion Resistance: Advanced coating protects against sweat, corrosion, humidity, and rust.
  • Reduced Finger Squeak: The smooth coating minimizes unwanted finger noise.
  • Consistent Performance: Reliable performance from gig to gig.

Setup and Installation

Proper installation of your Elixir bass strings is crucial for optimal performance and longevity. Follow these steps carefully:

  1. Remove Old Strings: Loosen the tuning pegs and carefully remove the old strings from your bass guitar.
  2. Clean Fretboard: While the strings are off, take the opportunity to clean and condition your fretboard.
  3. Install New Strings:
    • Insert the ball end of each new string into the bridge.
    • Thread the string through the appropriate tuning peg. Ensure each string is wound neatly around the tuning post.
    • For optimal tuning stability, ensure there are 2-3 wraps around the tuning post for each string.
  4. Tune the Bass: Gradually tighten each string to its correct pitch using a tuner.
  5. Stretch the Strings: Gently pull each string away from the fretboard several times to stretch them. Retune as necessary. This helps the strings settle and improves tuning stability.
Elixir Strings Electric Bass Guitar Strings packaging
Image: Elixir Strings Electric Bass Guitar Strings packaging. This image shows the front of the product packaging for Elixir Electric Bass Guitar Strings, highlighting the NANOWEB Technology and stainless steel material.

Operating Your Strings

Elixir Strings are designed for consistent performance. The NANOWEB coating provides a smooth feel, reducing finger noise and allowing for effortless playability. The strings maintain their bright, clear tone for an extended period, reducing the frequency of string changes.

Experiment with different playing techniques (fingerstyle, pick, slap) to discover the full tonal range these strings offer. Their durability makes them suitable for various musical genres and playing environments.

Musician playing bass guitar with Elixir Strings
Image: A musician playing a bass guitar, demonstrating the use of Elixir Strings. The image emphasizes the comfortable feel and playability of the strings.

Video: Elixir Strings Bass. This video features a discussion about Elixir Bass Strings, highlighting their tone, feel, and longevity. It includes demonstrations of the strings in use.

Maintenance and Care

Elixir Strings are designed for durability, but proper care can further extend their life and maintain optimal tone:

  • Wipe Down Strings: After each use, wipe down your strings with a clean, dry cloth to remove sweat and oils.
  • Avoid Harsh Cleaners: Do not use abrasive or chemical cleaners on your strings, as this can damage the NANOWEB coating.
  • Proper Storage: When not in use, store your bass in a case to protect it from environmental factors like humidity and temperature fluctuations.
  • Regular Inspection: Periodically inspect your strings for any signs of wear, such as fraying or discoloration, which may indicate it's time for a replacement.
Elixir Strings Anti-Corrosion Package
Image: Elixir Strings Anti-Corrosion Package. This image displays the back of the Elixir Strings packaging, emphasizing the anti-corrosion features and string gauge information.

Troubleshooting

Problem Possible Cause Solution
Dull Tone Accumulation of dirt/debris on strings. Wipe strings regularly. If tone remains dull, consider replacing the set.
Poor Tuning Stability Strings not properly stretched during installation; worn tuning pegs. Ensure strings are adequately stretched. Check tuning pegs for wear and proper function.
Excessive Finger Squeak Playing technique; string type. While Elixir strings reduce squeak, some techniques may still produce it. Adjust playing style if desired.
String Breakage Over-tightening; sharp edges on bridge/nut; manufacturing defect. Ensure proper tuning. Inspect bridge and nut for sharp edges. Contact support if strings break prematurely.

Specifications

  • Brand: Elixir
  • Model Number: 14702
  • String Type: Electric Bass Guitar Strings
  • Material: Stainless Steel with NANOWEB Technology
  • Number of Strings: 4-String Set
  • Scale Length: Long Scale
  • String Gauge: Medium (.050-.070-.085-.105)
  • Item Weight: 4.6 ounces
  • Product Dimensions: 6 x 0.75 x 6.63 inches

Warranty and Support

Elixir Strings are manufactured to high-quality standards. For any questions regarding product performance, defects, or general inquiries, please refer to the official Elixir Strings website or contact their customer support.

For more information, visit: www.ElixirStrings.com

Email support: elixirstrings@wlgore.com

© 2026 Elixir Strings. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.