Introduction
This manual provides instructions for the proper installation, operation, and maintenance of the Kyocera 1360133 Nozzle Attachment. This accessory is designed to facilitate dust collection when used with the TFE-450 Tabletop Thread Saw Board, ensuring a cleaner working environment.
Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Product Overview
Image 1: Front view of the Kyocera 1360133 Nozzle Attachment. This image displays the primary component, a black cylindrical attachment with a flared end, designed for connecting a dust collection hose to a power tool.
The Kyocera 1360133 is a nozzle attachment specifically designed to connect a dust collector hose to the Kyocera (or former Ryobi) TFE-450 Tabletop Thread Saw Board. It helps in managing sawdust and debris generated during sawing operations, improving air quality and visibility.
- Hose Connection Diameter: φ1.2 inches (30 mm) (inner diameter)
- Compatible Model: TFE-450 Tabletop Thread Saw Board
Image 2: Side view of the Kyocera 1360133 Nozzle Attachment. This perspective highlights the cylindrical shape and the smooth transition between the two connection points, one for the tool and one for the dust hose.
Image 3: Example of Kyocera and Ryobi branding on accessories. This image illustrates that accessories may carry either the Ryobi or Kyocera brand logo, indicating a brand transition. The product's quality and performance remain consistent regardless of the logo.
Setup
- Unpack the Attachment: Carefully remove the Kyocera 1360133 Nozzle Attachment from its packaging. Inspect it for any signs of damage.
- Identify Compatible Tool: Ensure you are using the Kyocera (or former Ryobi) TFE-450 Tabletop Thread Saw Board. This attachment is specifically designed for this model.
- Attach to Saw Board: Locate the dust port on your TFE-450 Tabletop Thread Saw Board. Insert one end of the 1360133 Nozzle Attachment firmly into this port. Ensure a snug fit to prevent air leaks and maximize dust collection efficiency.
- Connect Dust Collector Hose: Connect a dust collector hose with an inner diameter of φ1.2 inches (30 mm) to the other end of the nozzle attachment. Push the hose firmly onto the attachment until it is securely seated.
- Verify Connections: Before operating the saw, gently tug on both the attachment and the hose to confirm they are securely connected and will not detach during use.
Operating Instructions
Once the Kyocera 1360133 Nozzle Attachment is securely installed and connected to a dust collector, operate your TFE-450 Tabletop Thread Saw Board as usual. The attachment will direct sawdust and debris into your connected dust collection system.
- Always ensure the dust collector is turned on and functioning correctly before starting any sawing operation.
- Regularly check the dust collection bag or container and empty it as needed to maintain optimal suction.
- Do not operate the saw without the dust collection system if the work environment requires dust control.
Maintenance
Proper maintenance ensures the longevity and effectiveness of your nozzle attachment.
- Cleaning: After each use, or as needed, disconnect the nozzle attachment and clean any accumulated sawdust or debris from its interior and exterior surfaces. A brush or compressed air can be used for this purpose.
- Inspection: Periodically inspect the attachment for cracks, deformities, or any signs of wear that could affect its performance or connection integrity.
- Storage: Store the nozzle attachment in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor dust collection |
|
|
| Nozzle attachment detaches during use |
|
|
Specifications
| Brand | KYOCERA |
| Model Number | 1360133 |
| Compatible Tool | TFE-450 Tabletop Thread Saw Board |
| Hose Connection Diameter (Inner) | φ1.2 inches (30 mm) |
| Item Package Quantity | 1 |
| Batteries Required | No |
| Item Weight | 0.02 Kilograms (20 g) |
| Package Dimensions | 18 x 9.1 x 2.8 cm |
| Manufacturer | Kyocera |
Warranty Information
Specific warranty details for the Kyocera 1360133 Nozzle Attachment are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your original purchase of the TFE-450 Tabletop Thread Saw Board or contact Kyocera customer support directly.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact Kyocera customer support or the retailer from whom you purchased the product. Please have your product model number (1360133) and the model number of your TFE-450 Tabletop Thread Saw Board available when seeking assistance.