Product Overview
This document provides essential instructions for the safe and effective use of the Generic Compatible Replacement Car Adapter for the Radio Shack PRO 96 Digital Trunking Scanner. This adapter is designed to provide power to your scanner from a vehicle's 12V power outlet.
Image: The Generic Compatible Replacement Car Adapter. It features a coiled cord, a car cigarette lighter plug with a red indicator light, and a barrel connector for the scanner.
Safety Information
Please read all safety warnings before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected device.
- Do not expose the adapter to moisture or extreme temperatures.
- Ensure the vehicle's power outlet is clean and free of debris before insertion.
- Verify the voltage requirements of your device (Radio Shack PRO 96 Digital Trunking Scanner) match the adapter's output. Note: A user review indicates the PRO-96 scanner may require 9V, while this adapter is typically 12V. Verify compatibility before use to prevent damage.
- Do not attempt to disassemble or modify the adapter.
- Keep out of reach of children.
Setup
- Verify Compatibility: Before connecting, confirm that your Radio Shack PRO 96 Digital Trunking Scanner is compatible with a 12V power input. Refer to your scanner's manual for its specific power requirements.
- Connect to Scanner: Insert the barrel connector end of the car adapter firmly into the power input port of your Radio Shack PRO 96 Digital Trunking Scanner.
- Connect to Vehicle: Insert the car cigarette lighter plug end of the adapter into your vehicle's 12V accessory power outlet (cigarette lighter socket).
- Power Indicator: A red indicator light on the car plug will illuminate when the adapter is receiving power from the vehicle.
Operating Instructions
Once connected, the adapter will supply power to your scanner. Ensure your vehicle's ignition is in the 'ACC' or 'ON' position for the power outlet to be active, if applicable.
- The adapter is designed for continuous use during vehicle operation.
- Disconnect the adapter from the vehicle's power outlet when not in use for extended periods to prevent battery drain.
Maintenance
This adapter requires minimal maintenance.
- Keep the adapter clean and dry. Use a soft, dry cloth to wipe down the exterior.
- Do not use liquid cleaners or solvents.
- Regularly inspect the cable and connectors for any signs of damage, fraying, or corrosion. If damage is observed, discontinue use immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not powering scanner. |
|
|
| Red indicator light not on. |
|
|
| Scanner not functioning correctly after connecting. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Product Type | Car Power Adapter |
| Compatibility | Radio Shack PRO 96 Digital Trunking Scanner (Verify voltage compatibility) |
| Input Voltage | 12V DC (Vehicle Cigarette Lighter Socket) |
| Output Voltage | 12V DC (Based on product type and user review, but verify scanner's requirement) |
| Special Features | Over Voltage and Current Protection |
| Connector Type | Car Cigarette Lighter Plug to Barrel Connector |
| UPC | 731395900254 |
Important Note on Voltage: While this adapter is described as a "Car Adapter" with 12V DC input, a customer review indicates that the Radio Shack PRO-96 scanner typically requires a 9V input. Please verify the specific voltage requirements of your device before use to prevent potential damage. Any mention of "AC 110V-220V" or other non-12V DC specifications in product listings may be generic and not applicable to this specific car adapter.
Warranty and Support
For warranty information or technical support, please refer to the seller or manufacturer of this product. The manufacturer is DPDUSA.
- Seller: Accessory USA
- Manufacturer: DPDUSA
- Return Policy: 30-day refund/replacement (as per Amazon listing at time of purchase).
It is recommended to retain your purchase receipt for warranty claims.
