1. Important Safety Information
Please read all instructions carefully before using your Russell Hobbs RHSM1001 Steam Mop. Retain this manual for future reference.
- Always ensure the appliance is unplugged before cleaning or performing maintenance.
- Do not immerse the appliance in water or any other liquid.
- Keep the steam mop away from children and pets.
- Use only on sealed hard floors, tiles, vinyl flooring, carpets, and rugs. Do not use on unsealed wood or laminate floors.
- Never direct steam at people, animals, or electrical appliances.
- Use only tap water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals.
2. Product Overview and Components
The Russell Hobbs RHSM1001 Steam Mop is designed for effective cleaning of various floor types using steam. The package includes the following components:
- Russell Hobbs RHSM1001 Steam Mop Unit
- Measuring Jug
- Carpet Glider attachment
- 2 x Machine-Washable Microfibre Mop Pads
Image: Russell Hobbs RHSM1001 Steam Mop with its complete set of accessories.
3. Setup Instructions
3.1 Attaching the Mop Pad
- Place a clean microfibre mop pad on the floor with the loops facing upwards.
- Align the steam mop head over the pad and press down firmly to secure the pad using the hook-and-loop fasteners.
Image: Attaching a microfibre mop pad to the steam mop head.
3.2 Filling the Water Tank
- Ensure the steam mop is unplugged from the power outlet.
- Locate the water tank cap on the main body of the mop.
- Open the cap and use the provided measuring jug to fill the water tank with clean tap water. The tank has a capacity of 380ml. Do not overfill.
- Securely close the water tank cap.
Image: Filling the water tank using the provided measuring jug.
4. Operating Instructions
4.1 Powering On and Heating
- Plug the steam mop into a suitable power outlet. The power indicator light will illuminate.
- The mop will heat up rapidly, typically within 30 seconds. Once heated, it is ready for use.
4.2 Adjusting Steam Output
The steam mop features an adjustable steam control knob. Rotate the knob to increase or decrease the steam output according to the cleaning task and floor type.
Image: Adjusting the steam output using the control knob.
4.3 Cleaning Hard Floors
For sealed hard floors (tiles, vinyl, sealed wood), ensure a microfibre mop pad is attached. Move the steam mop slowly and steadily across the floor surface. The triangular head and low profile design allow for easy cleaning of corners and under furniture.
Image: Steam mop in operation on a hard floor surface.
4.4 Cleaning Carpets and Rugs
To refresh carpets and rugs, attach the carpet glider over the mop head with the microfibre pad. Move the steam mop over the carpet surface in a back-and-forth motion. This helps to revive carpet fibers and remove light stains.
Image: Using the steam mop with the carpet glider on a rug.
The 380ml water tank provides approximately 15 minutes of continuous steam cleaning, allowing you to cover multiple rooms before needing a refill. The 5-meter power cord offers extended reach.
5. Maintenance
5.1 Cleaning Mop Pads
The microfibre mop pads are machine-washable. After each use, remove the pad from the mop head and wash it according to the care instructions on the label. Do not use bleach or fabric softener.
5.2 Storing the Steam Mop
After use, unplug the mop and allow it to cool completely. Empty any remaining water from the tank. Store the mop in a dry, safe place, away from direct sunlight and out of reach of children.
6. Troubleshooting
- No Steam: Check if the unit is properly plugged in and powered on. Ensure the water tank is filled. Allow sufficient time for the mop to heat up (approx. 30 seconds).
- Poor Cleaning Performance: Ensure the mop pad is clean and properly attached. Adjust the steam output to a higher setting if needed. Move the mop more slowly over stubborn areas.
- Water Leaking: Ensure the water tank cap is securely closed. Do not overfill the water tank.
If you encounter issues not listed here, please refer to the warranty and support section for assistance.
7. Specifications
| Brand | Russell Hobbs |
| Model | RHSM1001 |
| Wattage | 1400W (1189.0 listed in some specifications) |
| Voltage | 240 Volts |
| Water Tank Volume | 0.38 Litres (380ml) |
| Heat-up Time | 30 seconds |
| Run Time | Up to 15 minutes |
| Power Cord Length | 5 meters |
| Dimensions (H x W x D) | 109 x 29 x 21 cm |
| Weight | 2.3 kg |
| Special Features | Portable, Triangular Floor Head, Low Profile Design |
Image: Product dimensions of the Russell Hobbs RHSM1001 Steam Mop.
8. Warranty and Support
The Russell Hobbs RHSM1001 Steam Mop comes with a standard 1-Year Guarantee. An additional second year of guarantee is available upon registering your product online. Please visit the official Russell Hobbs website for product registration and detailed warranty terms.
For technical support, spare parts, or warranty claims, please contact Russell Hobbs customer service through their official website or the contact information provided with your purchase documentation.
