Handy Art Black Glue 149-100 Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use of Handy Art Black Glue, model 149-100. Please read this manual thoroughly before using the product and retain it for future reference.

Product Overview

Handy Art Black Glue is a versatile adhesive designed for various art and craft projects. It is formulated to bond to a wide range of porous and non-porous materials, including paper, fabric, wood, and pottery. This product is non-toxic and conforms to ASTM D 4236 standards, making it suitable for educational and recreational use.

Image 1: Front view of the Handy Art Black Glue 4 oz bottle. The label clearly displays "Handy Art Black Glue" and indicates a volume of 4 fl oz (118ml).

Key Features:

• Color: Black
• Volume: 4 fluid ounces (118 ml)
• Material Compatibility: Bonds to paper, fabric, wood, pottery, and other porous and non-porous materials.
• Safety: Non-toxic, conforms to ASTM D 4236.
• Origin: Made in USA.

Setup

1. Preparation: Ensure your work surface is clean, dry, and protected from spills.
2. Opening the Bottle: Twist the cap counter-clockwise to open the nozzle.
3. Testing: For first-time use or new materials, it is recommended to test the glue on an inconspicuous area to observe drying time and adhesion.

Operating Instructions

Follow these steps for optimal application of Handy Art Black Glue:

1. Application: Gently squeeze the bottle to dispense the glue. Spread the glue evenly on one of the surfaces to be bonded.
2. Quantity: Use less glue for lighter materials such as paper. For heavier materials like wood or pottery, a more generous amount of glue may be required to ensure a strong bond.
3. Bonding: Press the two surfaces together firmly after applying the glue.
4. Drying: Allow adequate time for the glue to dry completely. Drying times may vary depending on the amount of glue used, material porosity, and environmental conditions (humidity, temperature).

Image 2: Back view of the Handy Art Black Glue 4 oz bottle. The label provides application instructions, cleanup details, and a "Do not freeze" caution.

Maintenance and Care

• Cleaning Spills: Wipe up any excess or spilled glue immediately with a damp cloth while it is still wet. Dried glue may be more difficult to remove.
• Nozzle Care: After each use, close the cap securely by twisting it clockwise to prevent the glue from drying out in the nozzle. If the nozzle becomes clogged, a pin or thin wire can be used to clear it.
• Storage: Store the bottle in a cool, dry place away from direct sunlight.
• Temperature Warning: Do not freeze the glue. Freezing can alter the consistency and effectiveness of the product.

Troubleshooting

• Glue Not Dispensing: Ensure the cap is fully twisted open. Check the nozzle for clogs and clear if necessary.
• Weak Bond: Ensure surfaces are clean and dry before application. Apply sufficient glue for the materials being bonded. Allow adequate drying time.
• Glue Drying Too Quickly: Work efficiently when applying. For large areas, apply glue in sections.

Specifications

Safety Information

• This product is non-toxic and conforms to ASTM D 4236.
• Avoid contact with eyes. In case of eye contact, flush thoroughly with water.
• Keep out of reach of small children without adult supervision.
• Do not ingest. If ingested, seek medical attention.
• Use in a well-ventilated area.

Warranty and Support

Information regarding specific product warranty details is not provided in the available data. For product support, inquiries, or further assistance, please contact Handy Art directly through their official channels.

Manufacturer: Handy Art, Inc.
Milton, WI 53563
Phone: 608-868-6873
Website: handyart.com