DHP Brady Wood Bunk Bed Frame Twin over Full

1. Introduction

This manual provides essential information for the safe assembly, use, and maintenance of your DHP Brady Wood Bunk Bed Frame. This versatile bunk bed features a twin-size top bunk and a full-size bottom bunk, offering a space-saving solution that can also convert into two stand-alone beds. Please read all instructions carefully before assembly and retain this manual for future reference.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

The top bunk is designed for children aged 6 years to young teenagers.
Only coil spring mattresses are to be used on both bunk levels. Mattresses are sold separately.
For the top bunk, the mattress thickness must be greater than 4 inches but not exceed 6 inches.
Ensure guardrails are always securely in place on the top bunk.
Regularly check all fasteners (bolts, screws, etc.) to ensure they are tight. Retighten as necessary.
Do not allow more than one person on the top bunk.
Do not attach or hang items on any part of the bunk bed that are not designed for use with the bed.
Always use the provided ladder for access to the top bunk.
This bunk bed meets US Safety Standards.

3. Product Features

Convertible Design: Easily converts into two stand-alone beds (one twin size and one full size).
Sturdy Construction: Made from durable wood with a grey finish.
Safety Features: Includes bed support slats, guardrails for the top bunk, and an easy-to-climb 4-step angled ladder.
No Box Spring Needed: Support slats are included, eliminating the need for a box spring.
Space-Saving: Ideal for children's bedrooms or guest rooms.

Diagram illustrating the thoughtfully designed features of the DHP Brady Bunk Bed, including solid pine wood frame, non-toxic painted finish, 12.5 inch high safety guardrail, angled 4-step ladder, solid wood slats, and under bed storage area. — Figure 1: Thoughtfully designed features of the DHP Brady Bunk Bed.

4. Assembly Instructions

Assembly of the DHP Brady Bunk Bed is required. The product conveniently ships in one box and includes all necessary hardware and detailed instructions. It is highly recommended to have at least two adults for assembly to ensure safety and ease of construction.

Before beginning, clear an open area and lay out all parts and hardware. Verify that all components are present according to the parts list in the included manual.
Follow the step-by-step instructions provided in the packaging precisely.
While an Allen key is provided, using a power drill with a compatible hex bit can expedite the process. Exercise caution to avoid overtightening screws, which could damage the wood.
The ladder can be installed in one location and is designed for easy access to the top bunk.

Assembled DHP Brady Wood Bunk Bed Frame in grey, with a twin bed on top and a full bed on the bottom. The bed is styled with blue and white striped bedding and pillows, and a laptop is on the floor next to it. — Figure 2: Fully assembled DHP Brady Wood Bunk Bed Frame.

The DHP Brady Wood Bunk Bed Frame unstacked into two separate beds: a twin bed and a full bed, both in grey with blue and white striped bedding. — Figure 3: The DHP Brady Bunk Bed converted into two stand-alone beds.

5. Usage Guidelines

The top bunk accommodates a twin mattress, and the bottom bunk accommodates a full mattress.
Ensure mattresses meet the specified thickness requirements for safety.
The bunk bed can be unstacked to form two individual beds as needed.

A close-up image of the DHP Brady Bunk Bed showing the recommended mattress thickness. Text indicates that the mattress thickness must be greater than 4 inches but not exceed 6 inches, and only coil spring mattresses should be used on both bunks. — Figure 4: Recommended mattress specifications for the DHP Brady Bunk Bed.

6. Maintenance

Clean the bed frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
Periodically inspect all connections and hardware to ensure they remain tight and secure.
Address any loose parts immediately to maintain structural integrity and safety.

7. Specifications

Feature	Detail
Product Dimensions	79"W x 69.5"D x 64.5"H
Size	Twin over Full
Color	Grey
Material	Wood
Top Bunk Weight Limit	165 lbs
Lower Bunk Weight Limit	250 lbs
Assembly Required	Yes
Mattress Type	Coil Spring (no box spring needed)
Item Model Number	DA6940GR
UPC	065857174151

A diagram showing the dimensions and weight limits of the DHP Brady Twin over Full Bunk Bed. It indicates a height of 64.5 inches, width of 69.5 inches, and depth of 78.5 inches. Weight limits are 165 lbs for the top bunk and 250 lbs for the bottom bunk. It also notes 'No Boxspring' and 'Kid Approved'. — Figure 5: Product dimensions and weight limits.

8. Troubleshooting

If you encounter any issues during assembly or use, please refer to the detailed troubleshooting section in your included assembly manual. Common issues may include:

Missing or Damaged Parts: Contact customer support immediately if any parts are missing or damaged upon arrival.
Loose Connections: Ensure all bolts and screws are tightened securely. Re-tighten periodically.
Squeaking: Check all connections and ensure the bed is on a level surface.

9. Warranty and Support

The DHP Brady Wood Bunk Bed Frame comes with a 1-year limited warranty. For warranty claims, replacement parts, or additional support, please refer to the contact information provided in your product packaging or visit the DHP official website.

10. Product Videos

No relevant official seller videos for the DHP Brady Wood Bunk Bed Frame were found in the provided data. The videos available pertain to a different product (carport) and are therefore not included in this manual.

DHP DA6940GR

DHP Brady Wood Bunk Bed Frame - Twin over Full Instruction Manual